Kta cleanup #4

jbech-linaro · 2014-06-24T07:40:52Z

Two commits, the first one cleans up in the source, the second one is a single commit just removing the file.

pascal-brand38 · 2014-06-24T10:25:38Z

+1

jbech-linaro · 2014-07-07T07:24:15Z

I'm adding a comment about IO macro being depracated, new patch will be uploaded soon. Note that, since this pull request should consist of two patches I'll also need to squash push one more.

jbech-linaro · 2014-07-07T07:38:52Z

Patch uploaded, if OK, next step is to rebase + squash into two separate patches, then upload final patch set.

pascal-brand38 · 2014-07-07T07:54:43Z

+1

- Moved IO macro from kta_mem.h to io.h. - Removed unused TEE_MEM_xyz defines. - Removed code that was used for TA's in TEE RAM (impossible to reach that code). Signed-off-by: Joakim Bech <joakim.bech@linaro.org>

Signed-off-by: Joakim Bech <joakim.bech@linaro.org>

jbech-linaro · 2014-07-07T08:54:38Z

Patches rebased to latest on master and squashed into two separate patches (one for changes and one for removing a file). This should be ready to be merged.

jenswi-linaro · 2014-07-07T10:49:14Z

+1

Minor comment. Signed-off-by: Clement Faure <clement.faure@nxp.com>

…river Minor fixes. Signed-off-by: Clement Faure <clement.faure@nxp.com>

Minor fixes. Signed-off-by: Clement Faure <clement.faure@nxp.com>

Size of each JR Output ring entry is of 12 bytes for CAAM using address pointer size as 64 bit. The descriptor address pointer thus lies at 32 bit boundary in second output ring entry. 64 bit access of descriptor pointer at 32 bit boundary generates alignment fault. To fix this, descriptor address pointer should be accessed as two 32 bit operations. regression_1004 Test User Crypt TA E/TC:04 00 E/TC:04 00 Core data-abort at address 0xfc09774c (alignment fault) E/TC:04 00 esr 0x96000021 ttbr0 0x20000fc0d0080 ttbr1 0x00000000 cidr 0x0 E/TC:04 00 cpu OP-TEE#4 cpsr 0x200001c4 E/TC:04 00 x0 00000000fc09774c x1 00000000fc096f80 E/TC:04 00 x2 0000000000000000 x3 0000008000020000 E/TC:04 00 x4 0000000000000003 x5 000000000000ca90 E/TC:04 00 x6 0000000000000000 x7 0000000000000020 E/TC:04 00 x8 00000000fc094418 x9 00000000d36adb98 E/TC:04 00 x10 0000000041001900 x11 00000000ab12a911 E/TC:04 00 x12 0000000032e4d24d x13 00000000e1b6489b E/TC:04 00 x14 0000000000000000 x15 0000000000000000 E/TC:04 00 x16 00000000fc0ddba8 x17 0000000000000000 E/TC:04 00 x18 0000000000000000 x19 0000000000000000 E/TC:04 00 x20 000000000000270f x21 00000000fc075000 E/TC:04 00 x22 0000000000000000 x23 00000000fc09774c E/TC:04 00 x24 00000000fc096f80 x25 0000000000000000 E/TC:04 00 x26 0000000000000001 x27 00000000fc06b000 E/TC:04 00 x28 0000000000000000 x29 00000000fc0dd970 E/TC:04 00 x30 00000000fc0193f4 elr 00000000fc01a04c E/TC:04 00 sp_el0 00000000fc0dd970 E/TC:04 00 TEE load address @ 0xfc000000 E/TC:04 00 Call stack: E/TC:04 00 0x00000000fc01a04c E/TC:04 00 0x00000000fc019690 E/TC:04 00 0x00000000fc01e884 E/TC:04 00 0x00000000fc01ec30 E/TC:04 00 0x00000000fc018a74 E/TC:04 00 0x00000000fc030e18 E/TC:04 00 0x00000000fc02f5d8 E/TC:04 00 0x00000000fc02d6f8 E/TC:04 00 0x00000000fc02fde8 E/TC:04 00 0x00000000fc02d9e8 E/TC:04 00 0x00000000fc02dcb4 E/TC:04 00 0x00000000fc031bc8 E/TC:04 00 0x00000000fc032408 E/TC:04 00 0x00000000fc005370 E/TC:04 00 0x00000000fc022298 E/TC:04 00 0x00000000fc0059e4 E/TC:04 00 0x00000000fc020d5c E/TC:04 00 0x00000000fc026bd8 E/TC:04 00 0x00000000fc0115e8 E/TC:04 00 0x00000000fc007a64 E/TC:04 00 0x00000000fc0039e0 E/TC:04 00 Panic '[abort] alignement fault! (trap CPU)' at core/arch/arm/kernel/abort.c:477 <get_fault_type> E/TC:04 00 TEE load address @ 0xfc000000 Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>

Size of each JR Output ring entry is of 12 bytes for CAAM using address pointer size as 64 bit. The descriptor address pointer thus lies at 32 bit boundary in second output ring entry. 64 bit access of descriptor pointer at 32 bit boundary generates alignment fault. To fix this, descriptor address pointer should be accessed as two 32 bit operations. regression_1004 Test User Crypt TA E/TC:04 00 E/TC:04 00 Core data-abort at address 0xfc09774c (alignment fault) E/TC:04 00 esr 0x96000021 ttbr0 0x20000fc0d0080 ttbr1 0x00000000 cidr 0x0 E/TC:04 00 cpu OP-TEE#4 cpsr 0x200001c4 E/TC:04 00 x0 00000000fc09774c x1 00000000fc096f80 E/TC:04 00 x2 0000000000000000 x3 0000008000020000 E/TC:04 00 x4 0000000000000003 x5 000000000000ca90 E/TC:04 00 x6 0000000000000000 x7 0000000000000020 E/TC:04 00 x8 00000000fc094418 x9 00000000d36adb98 E/TC:04 00 x10 0000000041001900 x11 00000000ab12a911 E/TC:04 00 x12 0000000032e4d24d x13 00000000e1b6489b E/TC:04 00 x14 0000000000000000 x15 0000000000000000 E/TC:04 00 x16 00000000fc0ddba8 x17 0000000000000000 E/TC:04 00 x18 0000000000000000 x19 0000000000000000 E/TC:04 00 x20 000000000000270f x21 00000000fc075000 E/TC:04 00 x22 0000000000000000 x23 00000000fc09774c E/TC:04 00 x24 00000000fc096f80 x25 0000000000000000 E/TC:04 00 x26 0000000000000001 x27 00000000fc06b000 E/TC:04 00 x28 0000000000000000 x29 00000000fc0dd970 E/TC:04 00 x30 00000000fc0193f4 elr 00000000fc01a04c E/TC:04 00 sp_el0 00000000fc0dd970 E/TC:04 00 TEE load address @ 0xfc000000 E/TC:04 00 Call stack: E/TC:04 00 0x00000000fc01a04c E/TC:04 00 0x00000000fc019690 E/TC:04 00 0x00000000fc01e884 E/TC:04 00 0x00000000fc01ec30 E/TC:04 00 0x00000000fc018a74 E/TC:04 00 0x00000000fc030e18 E/TC:04 00 0x00000000fc02f5d8 E/TC:04 00 0x00000000fc02d6f8 E/TC:04 00 0x00000000fc02fde8 E/TC:04 00 0x00000000fc02d9e8 E/TC:04 00 0x00000000fc02dcb4 E/TC:04 00 0x00000000fc031bc8 E/TC:04 00 0x00000000fc032408 E/TC:04 00 0x00000000fc005370 E/TC:04 00 0x00000000fc022298 E/TC:04 00 0x00000000fc0059e4 E/TC:04 00 0x00000000fc020d5c E/TC:04 00 0x00000000fc026bd8 E/TC:04 00 0x00000000fc0115e8 E/TC:04 00 0x00000000fc007a64 E/TC:04 00 0x00000000fc0039e0 Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>

Size of each JR Output ring entry is of 12 bytes for CAAM using address pointer size as 64 bit. The descriptor address pointer thus lies at 32 bit boundary in second output ring entry. 64 bit access of descriptor pointer at 32 bit boundary generates alignment fault. To fix this, descriptor address pointer should be accessed as two 32 bit operations. regression_1004 Test User Crypt TA E/TC:04 00 E/TC:04 00 Core data-abort at address 0xfc09774c (alignment fault) E/TC:04 00 esr 0x96000021 ttbr0 0x20000fc0d0080 ttbr1 0x00000000 cidr 0x0 E/TC:04 00 cpu OP-TEE#4 cpsr 0x200001c4 E/TC:04 00 x0 00000000fc09774c x1 00000000fc096f80 E/TC:04 00 x2 0000000000000000 x3 0000008000020000 E/TC:04 00 x4 0000000000000003 x5 000000000000ca90 E/TC:04 00 x6 0000000000000000 x7 0000000000000020 E/TC:04 00 x8 00000000fc094418 x9 00000000d36adb98 E/TC:04 00 x10 0000000041001900 x11 00000000ab12a911 E/TC:04 00 x12 0000000032e4d24d x13 00000000e1b6489b E/TC:04 00 x14 0000000000000000 x15 0000000000000000 E/TC:04 00 x16 00000000fc0ddba8 x17 0000000000000000 E/TC:04 00 x18 0000000000000000 x19 0000000000000000 E/TC:04 00 x20 000000000000270f x21 00000000fc075000 E/TC:04 00 x22 0000000000000000 x23 00000000fc09774c E/TC:04 00 x24 00000000fc096f80 x25 0000000000000000 E/TC:04 00 x26 0000000000000001 x27 00000000fc06b000 E/TC:04 00 x28 0000000000000000 x29 00000000fc0dd970 E/TC:04 00 x30 00000000fc0193f4 elr 00000000fc01a04c E/TC:04 00 sp_el0 00000000fc0dd970 E/TC:04 00 TEE load address @ 0xfc000000 E/TC:04 00 Call stack: E/TC:04 00 0x00000000fc01a04c E/TC:04 00 0x00000000fc019690 E/TC:04 00 0x00000000fc01e884 E/TC:04 00 0x00000000fc01ec30 E/TC:04 00 0x00000000fc018a74 E/TC:04 00 0x00000000fc030e18 E/TC:04 00 0x00000000fc02f5d8 E/TC:04 00 0x00000000fc02d6f8 E/TC:04 00 0x00000000fc02fde8 E/TC:04 00 0x00000000fc02d9e8 E/TC:04 00 0x00000000fc02dcb4 E/TC:04 00 0x00000000fc031bc8 E/TC:04 00 0x00000000fc032408 E/TC:04 00 0x00000000fc005370 E/TC:04 00 0x00000000fc022298 E/TC:04 00 0x00000000fc0059e4 E/TC:04 00 0x00000000fc020d5c E/TC:04 00 0x00000000fc026bd8 E/TC:04 00 0x00000000fc0115e8 E/TC:04 00 0x00000000fc007a64 E/TC:04 00 0x00000000fc0039e0 Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: Sahil Malhotra <sahil.malhotra@nxp.com> Reviewed-by: Clement Faure <clement.faure@nxp.com>

A squashed series of changes in stm32mp1 clock driver for supporting SCMI server as a clock consumer. These changes have not been upstream yet in OP-TEE OS. Below the details. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> ### Commit message OP-TEE#1 plat-stm32mp1: clock: remove oscillators and PLLs from shared resources Oscillators, PLL1 and PLL2 are not resources allocated upon platform configuration, these are always under secure world control. This change removes them fro the list of the shared resources. Since these resource are always secure, there is no need to look up clock tree when a leaf clock is registered as secure to know which parent clock(s) is/are secure. This removes functions from shared_resources.c and stm32mp1_clk.c. stm32mp_register_clock_parents_secure() can be removed and all its private dependencies. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#2 plat-stm32mp1: clock: fix mcu/axi parent clock Correct MCU clock parent selector: MCU subsystem clock is derived from clock PLL3_P, not PLL3. Correct AXI clock parent selector: AXI subsystem clock is derived from clock PLL2_P, not PLL2. This change also renames MCU clock and AXI clock resources to prevent confusion. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#3 plat-stm32mp1: clock: allow tree lookup for several system clocks Oscillators, PLLs and some system clocks can be related straight to a parent clock. Prior this change were only oscillators and few clocks supported by this look up. This changes adds PLLs and other system clocks. This enables for flexible use of clock tree exploration when computing a clock frequency value. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#4 plat-stm32mp1: clock: handle always on clocks Oscillators and PLLs are not gated on stm32mp_clk_enable/disable() calls. This change allows function to blindly call clock gating function on always on clocks. Gating these clock is out of the scope of this change even if preferred for power consumption optimization. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#5 plat-stm32mp1: clock: add rtc as gateable clock Add clock RTC as a clock one can access through the stm32_util.h API function stm32_clock_*(). Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#6 plat-stm32mp1: clock: enable some secure clocks at init With this change some system clock are enabled by core at boot time and have a reference counter synchronized with the clock hardware state. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#7 plat-stm32mp1: factorize rtc clock gating bit position For consistency, define macro RCC_BDCR_RTCCKEN_POS in stm32mp1_rcc.h to factorize definition of the RTC clock gating resources. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#8 plat-stm32mp1: add mdma secure clock Add support for MDMA secure clock. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#9 plat-stm32mp1: remove unused usb non-secure clock Remove unused clocks USBO_CLK and USBPHY_K resources. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#10 plat-stm32mp1: clock: secure and non-secure gateable clocks Array stm32mp1_clk_gate[] defines the clock resources. This change add a secure attribute to the clock: secure upon RCC[TZEN] (SEC), secure upon RCC[TZEN] and RCC[MCKPROT] (MKP) or always accessible from non-secure (N_S). At init, lookup clock tree to ensure that parents of a secure clock are registered a secure resources in the shared_resources.c driver. Non-secure clock that OP-TEE expect to enable are enabled without increase the clock refcount. For consistency, such clocks are not disabled by core. Such clocks may be accessed by OP-TEE Core when the non-secure world is not executing, for example at boot time or could be when system is suspending/resuming. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#11 plat-stm32mp1: clock: fixup parent clock ids Use _UNKNOWN_ID macro rather than 0xff for clocks parent IDs that do not relate to a gateable clock. Fix parent clock ID _HSE_KER_DIV2 that relates to clock CK_HSE_KER_DIV2, not CK_HSE. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#12 plat-stm32mp1: clock: don't embed unused non-secure uart clock Embed UART parent clock resource upon CFG_WITH_NSEC_UARTS=y. This configuration switch was already used to embed or not the non-secure UART clocks but not the resources used to looks there ascendant clocks. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#13 plat-stm32mp1: shared resources: get shared clock controller state stm32mp_nsec_can_access_clock() reports whether a clock is assigned to the secure world only, or when it can be manipulated by the non-secure world. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#14 plat-stm32mp1: shared resource: remove unused stm32mp_clock_is_*() Remove unused functions stm32mp_clock_is_shareable(), stm32mp_clock_is_shared() and stm32mp_clock_is_non_secure(). Signed-off-by: Etienne Carriere <etienne.carriere@st.com>

Adds a few assert() that snprintf() succeeds in print_seg(). This fixes coverity scan: CID 1501815 (#4 of 4): Unchecked return value (CHECKED_RETURN) Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Adds a few assert() that snprintf() succeeds in print_seg(). This fixes coverity scan: CID 1501815 (#4 of 4): Unchecked return value (CHECKED_RETURN) Reviewed-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

Fixed indent in plat-synquacer/main.c Size changed to 1 for hi16xx_rng and stm32_rng Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>

jbech-linaro added 2 commits July 7, 2014 10:50

Removed unused KTA related defines

1f70169

- Moved IO macro from kta_mem.h to io.h. - Removed unused TEE_MEM_xyz defines. - Removed code that was used for TA's in TEE RAM (impossible to reach that code). Signed-off-by: Joakim Bech <joakim.bech@linaro.org>

Removed file core/include/kernel/kta_mem.h

7349681

Signed-off-by: Joakim Bech <joakim.bech@linaro.org>

ghost merged commit 7349681 into OP-TEE:master Jul 7, 2014

jbech-linaro deleted the kta_cleanup branch July 7, 2014 11:29

z08053520 mentioned this pull request Nov 11, 2014

add path for processing R_ARM_ABS32 section of TA #118

Closed

hoihochan mentioned this pull request May 9, 2016

Question about how optee_os is started #777

Closed

acy54321 mentioned this pull request Jun 20, 2016

Print Error have to help Issue #864

Closed

jforissier mentioned this pull request Jul 20, 2016

pl022 spi v2 #905

Merged

kdy1029 mentioned this pull request Nov 7, 2016

OP-TEE on UDOO NEO i.MX6 #1163

Closed

xfeng12 mentioned this pull request Mar 11, 2017

Kernel panic with CAAM on IMX6UL EVK? #1408

Closed

MrVan mentioned this pull request Jun 22, 2017

Add i.MX PSCI CPU off and update i.MX6UL #1577

Merged

Atomar25 mentioned this pull request Apr 3, 2018

OPTEE: xtest hang on Nitrogen6x #2227

Closed

lorc mentioned this pull request Jan 14, 2019

xtest 1013 hangs in normal world #2737

Closed

PratikGajera mentioned this pull request May 20, 2019

Unhandled fault: external abort on non-linefetch #3023

Closed

etienne-lms mentioned this pull request Jun 28, 2019

Cache optimizations #3005

Merged

nageshshamnur mentioned this pull request Nov 14, 2019

normal world CA is hanging at getentropy( ) syscall #3396

Closed

clementfaure added a commit to clementfaure/optee_os that referenced this pull request Feb 27, 2020

[Review OP-TEE#4] Add small comment about smallprime product values

d887def

Minor comment. Signed-off-by: Clement Faure <clement.faure@nxp.com>

clementfaure added a commit to clementfaure/optee_os that referenced this pull request Mar 12, 2020

[Review OP-TEE#4] core: driver: generic resources for crypto device d…

a1892ca

…river Minor fixes. Signed-off-by: Clement Faure <clement.faure@nxp.com>

clementfaure added a commit to clementfaure/optee_os that referenced this pull request Mar 12, 2020

[Review OP-TEE#4] drivers: caam: implement NXP CAAM driver - Cipher

6fa4b1f

Minor fixes. Signed-off-by: Clement Faure <clement.faure@nxp.com>

ZhikuiRen mentioned this pull request Apr 13, 2020

Kernel boot stuck at idle after optee. Need help. #3745

Closed

chenlifu2015 mentioned this pull request May 27, 2020

Enable smp with imx8qm(optee: 3.8.0 linux:4.14 arm64 )，bring up all cpus successfuly, but kernel oops with kernel page fault #3892

Closed

mtech2018 mentioned this pull request Jun 1, 2020

Core abort while calling system calls from libutee through PTA #3906

Closed

angelina-zhao mentioned this pull request Jul 21, 2020

How to unwind a stack with mixed arm32 instruction and thumb instrustions? #3928

Closed

carrionbent mentioned this pull request Mar 4, 2021

could you help data-abort, undef-abort, prefetch-abort and stack_abt[5] overflow #4445

Closed

a-rybakov added a commit to a-rybakov/optee_os-1 that referenced this pull request Jun 7, 2021

fix comments by Etienne part OP-TEE#4

423c2e7

Fixed indent in plat-synquacer/main.c Size changed to 1 for hi16xx_rng and stm32_rng Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>

zzbios mentioned this pull request Jan 31, 2023

optee secure_storage example CA fails to run #5803

Closed

zzbios mentioned this pull request Apr 6, 2023

Failed to run large size TA #5943

Closed

jcmrodrigues mentioned this pull request Dec 12, 2024

Verify key returning 0xffff0006 (TEE_ERROR_BAD_PARAMETERS) when CONFIG_NULL_TTY is activated #7178

Closed

yuvraj1803 mentioned this pull request Dec 16, 2024

OPTEE assertion fail in bpool when OPTEE_SMC_VM_CREATED is called a second time #7182

Closed

This pull request was closed.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Kta cleanup #4

Kta cleanup #4

jbech-linaro commented Jun 24, 2014

pascal-brand38 commented Jun 24, 2014

jbech-linaro commented Jul 7, 2014

jbech-linaro commented Jul 7, 2014

pascal-brand38 commented Jul 7, 2014

jbech-linaro commented Jul 7, 2014

jenswi-linaro commented Jul 7, 2014

Kta cleanup #4

Kta cleanup #4

Conversation

jbech-linaro commented Jun 24, 2014

pascal-brand38 commented Jun 24, 2014

jbech-linaro commented Jul 7, 2014

jbech-linaro commented Jul 7, 2014

pascal-brand38 commented Jul 7, 2014

jbech-linaro commented Jul 7, 2014

jenswi-linaro commented Jul 7, 2014