Update aeabi_divmod.c #2
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
added 5 commits
June 13, 2014 14:56
Corrected division_qr to work on unsigned ints, and simplified uint_div_qr accordingly Note - this file is no longer ARM-specific.
Kernel coding style done
Right condition to stop the increment
Cleaned up the code (removed unnecessary tests and operations)
Forgot two spaces (krnl coding style)
|
Test OK on hardware. |
Merged
ghost
closed this
in
jforissier
referenced
this pull request
in jforissier/optee_os
Sep 13, 2016
There is a race condition in the code that creates and deletes trusted
storage. If multiple threads invoke a multi-session TA to create and
delete different files (such as xtest 6016), the following can occur:
Thread #1 (create file #1) | Thread #2 (delete file #2)
|
| remove("/TA_dir/file");
mkdir("/TA_dir"); |
| rmdir("/TA_dir");
create("/TA_dir/file1"); |
=> ENOENT |
Add a mutex to prevent this race condition.
Note: the bug is currently not triggered by xtest 1016 because the test
is run for RPMB FS only, and because directory operations are no-ops in
the RPMB implementation. The fix will be needed when enabling single-TA
concurrency with the REE and SQL backends.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
jforissier
referenced
this pull request
in jforissier/optee_os
Sep 13, 2016
There is a race condition in the code that creates and deletes trusted
storage. If multiple threads invoke a multi-session TA to create and
delete different files (such as xtest 6016), the following can occur:
Thread #1 (create file #1) | Thread #2 (delete file #2)
|
| unlink("/TA_dir/file2");
mkdir("/TA_dir"); |
| rmdir("/TA_dir");
create("/TA_dir/file1"); |
=> ENOENT |
Add a mutex to prevent this race condition.
Note: the bug is currently not triggered by xtest 1016 because the test
is run for RPMB FS only, and because directory operations are no-ops in
the RPMB implementation. The fix will be needed when enabling single-TA
concurrency with the REE and SQL backends.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
This was referenced Mar 15, 2017
jforissier
referenced
this pull request
in jforissier/optee_os
Aug 7, 2017
Address Etienne's comments (round #2). Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
jforissier
referenced
this pull request
in jforissier/optee_os
Aug 7, 2017
Address Etienne's comments (round #2). Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
jforissier
referenced
this pull request
in jforissier/optee_os
Aug 7, 2017
Address Etienne's comments (round #2). Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
jforissier
referenced
this pull request
in jforissier/optee_os
Aug 7, 2017
Address Etienne's comments (round #2) Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
jforissier
referenced
this pull request
in jforissier/optee_os
Aug 7, 2017
Address Etienne's comments (round #2). Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Closed
jforissier
added a commit
that referenced
this pull request
Nov 8, 2018
This commit introduces an algorithm that may be used to detect improper
usage of locks at runtime. It can detect two kinds errors:
1. A thread tries to release a lock it does not own,
2. A thread tries to aquire a lock and the operation could *potentially*
result in a deadlock.
The potential deadlock detection assumes that the code adheres to a strict
locking hierarchy, in other word, that there is a partial ordering on the
locks so that there can be no situation where circular waits can occur. To
put things simply, any two locks should be acquired in the same order in
the same thread. This addresses the following case:
[Thread #1] [Thread #2]
lock(A)
lock(B)
lock(B)
lock(A) <-- deadlock!
...
The algorithm builds the lock hierarchy dynamically and reports as soon as
a violation is detected.
The interface is made of two functions: lockdep_lock_acquire() and
lockdep_lock_release(), which are meant to be introduced in the
implementation of the actual lock objects. The "acquire" hook tells the
algorithm that a particular lock is about to be requested by a particular
thread, while the "release" hook is meant to be called before the lock is
actually released. If an error is detected, debugging information is sent
to the console, and panic() is called. The debugging information includes
the lock cycle that was detected (in the above example, {A, B}), as well
as the call stacks at the points where the locks were acquired.
The good thing with such an instrumentation of the locking code is that
there is no need to wait for an actual deadlock to occur in order to
detect potential problems. For instance, the timing of execution in the
above example could be different but the problem would still be detected:
[Thread #1] [Thread #2]
lock(A)
lock(B)
unlock(B)
unlock(A)
lock(B)
lock(A) <-- error!
A pseudo-TA is added for testing (pta/core_lockdep_tests.c).
This code is based on two sources:
- A presentation called "Dl-Check: dynamic potential deadlock detection
tool for Java programs" [1], although the somewhat complex MNR algorithm
for topological ordering of a DAG was not used;
- A depth-first search algorithm [2] was used instead.
Link: [1] https://www.slideshare.net/IosifItkin/tmpa2017-dlcheck-dynamic-potential-deadlock-detection-tool-for-java-programs
Link: [2] https://en.wikipedia.org/wiki/Topological_sorting#Depth-first_search
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
clementfaure
added a commit
to clementfaure/optee_os
that referenced
this pull request
Aug 2, 2019
Remove empty line in imx8m.h Remove extra space in sub.mk Replace "%x" with "%" PRIx32. Signed-off-by: Clement Faure <clement.faure@nxp.com>
clementfaure
added a commit
to clementfaure/optee_os
that referenced
this pull request
Nov 15, 2019
Use the newly defined UL macro. Signed-off-by: Clement Faure <clement.faure@nxp.com>
clementfaure
added a commit
to clementfaure/optee_os
that referenced
this pull request
Nov 15, 2019
Use the newly defined UL macro. Signed-off-by: Clement Faure <clement.faure@nxp.com>
clementfaure
added a commit
to clementfaure/optee_os
that referenced
this pull request
Feb 27, 2020
Minor fix rsassa.c
clementfaure
added a commit
to clementfaure/optee_os
that referenced
this pull request
Feb 27, 2020
Minor fix rsassa.c Signed-off-by: Clement Faure <clement.faure@nxp.com>
clementfaure
added a commit
to clementfaure/optee_os
that referenced
this pull request
Mar 5, 2020
Minors fixes. Signed-off-by: Clement Faure <clement.faure@nxp.com>
clementfaure
added a commit
to clementfaure/optee_os
that referenced
this pull request
Mar 5, 2020
…river Minor fixes. Signed-off-by: Clement Faure <clement.faure@nxp.com>
vingu-linaro
pushed a commit
to vingu-linaro/optee_os
that referenced
this pull request
May 20, 2020
A squashed series of changes in stm32mp1 clock driver for supporting SCMI server as a clock consumer. These changes have not been upstream yet in OP-TEE OS. Below the details. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> ### Commit message OP-TEE#1 plat-stm32mp1: clock: remove oscillators and PLLs from shared resources Oscillators, PLL1 and PLL2 are not resources allocated upon platform configuration, these are always under secure world control. This change removes them fro the list of the shared resources. Since these resource are always secure, there is no need to look up clock tree when a leaf clock is registered as secure to know which parent clock(s) is/are secure. This removes functions from shared_resources.c and stm32mp1_clk.c. stm32mp_register_clock_parents_secure() can be removed and all its private dependencies. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#2 plat-stm32mp1: clock: fix mcu/axi parent clock Correct MCU clock parent selector: MCU subsystem clock is derived from clock PLL3_P, not PLL3. Correct AXI clock parent selector: AXI subsystem clock is derived from clock PLL2_P, not PLL2. This change also renames MCU clock and AXI clock resources to prevent confusion. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#3 plat-stm32mp1: clock: allow tree lookup for several system clocks Oscillators, PLLs and some system clocks can be related straight to a parent clock. Prior this change were only oscillators and few clocks supported by this look up. This changes adds PLLs and other system clocks. This enables for flexible use of clock tree exploration when computing a clock frequency value. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#4 plat-stm32mp1: clock: handle always on clocks Oscillators and PLLs are not gated on stm32mp_clk_enable/disable() calls. This change allows function to blindly call clock gating function on always on clocks. Gating these clock is out of the scope of this change even if preferred for power consumption optimization. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#5 plat-stm32mp1: clock: add rtc as gateable clock Add clock RTC as a clock one can access through the stm32_util.h API function stm32_clock_*(). Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#6 plat-stm32mp1: clock: enable some secure clocks at init With this change some system clock are enabled by core at boot time and have a reference counter synchronized with the clock hardware state. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#7 plat-stm32mp1: factorize rtc clock gating bit position For consistency, define macro RCC_BDCR_RTCCKEN_POS in stm32mp1_rcc.h to factorize definition of the RTC clock gating resources. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#8 plat-stm32mp1: add mdma secure clock Add support for MDMA secure clock. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#9 plat-stm32mp1: remove unused usb non-secure clock Remove unused clocks USBO_CLK and USBPHY_K resources. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#10 plat-stm32mp1: clock: secure and non-secure gateable clocks Array stm32mp1_clk_gate[] defines the clock resources. This change add a secure attribute to the clock: secure upon RCC[TZEN] (SEC), secure upon RCC[TZEN] and RCC[MCKPROT] (MKP) or always accessible from non-secure (N_S). At init, lookup clock tree to ensure that parents of a secure clock are registered a secure resources in the shared_resources.c driver. Non-secure clock that OP-TEE expect to enable are enabled without increase the clock refcount. For consistency, such clocks are not disabled by core. Such clocks may be accessed by OP-TEE Core when the non-secure world is not executing, for example at boot time or could be when system is suspending/resuming. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#11 plat-stm32mp1: clock: fixup parent clock ids Use _UNKNOWN_ID macro rather than 0xff for clocks parent IDs that do not relate to a gateable clock. Fix parent clock ID _HSE_KER_DIV2 that relates to clock CK_HSE_KER_DIV2, not CK_HSE. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#12 plat-stm32mp1: clock: don't embed unused non-secure uart clock Embed UART parent clock resource upon CFG_WITH_NSEC_UARTS=y. This configuration switch was already used to embed or not the non-secure UART clocks but not the resources used to looks there ascendant clocks. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#13 plat-stm32mp1: shared resources: get shared clock controller state stm32mp_nsec_can_access_clock() reports whether a clock is assigned to the secure world only, or when it can be manipulated by the non-secure world. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> ### Commit message OP-TEE#14 plat-stm32mp1: shared resource: remove unused stm32mp_clock_is_*() Remove unused functions stm32mp_clock_is_shareable(), stm32mp_clock_is_shared() and stm32mp_clock_is_non_secure(). Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
jforissier
added a commit
that referenced
this pull request
Aug 26, 2020
Tracing the log syscall is of very little value since it will generate some output to the console anyways. Worse, it pollutes the TA output in case of a panic or an abort. For example: o regression_4005.1 AE case 0 algo 0x40000710 line 2819 F/TC:?? 0 trace_syscall:132 syscall #27 (syscall_cryp_obj_alloc) F/TC:?? 0 trace_syscall:132 syscall #15 (syscall_cryp_state_alloc) F/TC:?? 0 trace_syscall:132 syscall #27 (syscall_cryp_obj_alloc) F/TC:?? 0 trace_syscall:132 syscall #24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall #30 (syscall_cryp_obj_populate) F/TC:?? 0 trace_syscall:132 syscall #24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall #24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall #29 (syscall_cryp_obj_reset) F/TC:?? 0 trace_syscall:132 syscall #24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall #24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall #31 (syscall_cryp_obj_copy) F/TC:?? 0 trace_syscall:132 syscall #24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall #28 (syscall_cryp_obj_close) F/TC:?? 0 trace_syscall:132 syscall #34 (syscall_authenc_init) F/TC:?? 0 trace_syscall:132 syscall #2 (syscall_panic) E/TC:?? 0 E/TC:?? 0 TA panicked with code 0xffff0006 F/TC:?? 0 trace_syscall:132 syscall #1 (syscall_log) E/LD: Status of TA cb3e5ba0-adf1-11e0-998b-0002a5d5c51b F/TC:?? 0 trace_syscall:132 syscall #1 (syscall_log) E/LD: arch: aarch64 F/TC:?? 0 trace_syscall:132 syscall #1 (syscall_log) E/LD: region 0: va 0x40004000 pa 0x100062d000 size 0x002000 flags rw-s (ldelf) F/TC:?? 0 trace_syscall:132 syscall #1 (syscall_log) E/LD: region 1: va 0x40006000 pa 0x100062f000 size 0x00d000 flags r-xs (ldelf) ... Therefore, skip the trace if the syscall number it TEE_SCN_LOG. Signed-off-by: Jerome Forissier <jerome@forissier.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
brenzi
pushed a commit
to elias-vd/optee_os
that referenced
this pull request
Feb 13, 2021
Tracing the log syscall is of very little value since it will generate some output to the console anyways. Worse, it pollutes the TA output in case of a panic or an abort. For example: o regression_4005.1 AE case 0 algo 0x40000710 line 2819 F/TC:?? 0 trace_syscall:132 syscall OP-TEE#27 (syscall_cryp_obj_alloc) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#15 (syscall_cryp_state_alloc) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#27 (syscall_cryp_obj_alloc) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#30 (syscall_cryp_obj_populate) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#29 (syscall_cryp_obj_reset) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#31 (syscall_cryp_obj_copy) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#24 (syscall_cryp_obj_get_info) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#28 (syscall_cryp_obj_close) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#34 (syscall_authenc_init) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#2 (syscall_panic) E/TC:?? 0 E/TC:?? 0 TA panicked with code 0xffff0006 F/TC:?? 0 trace_syscall:132 syscall OP-TEE#1 (syscall_log) E/LD: Status of TA cb3e5ba0-adf1-11e0-998b-0002a5d5c51b F/TC:?? 0 trace_syscall:132 syscall OP-TEE#1 (syscall_log) E/LD: arch: aarch64 F/TC:?? 0 trace_syscall:132 syscall OP-TEE#1 (syscall_log) E/LD: region 0: va 0x40004000 pa 0x100062d000 size 0x002000 flags rw-s (ldelf) F/TC:?? 0 trace_syscall:132 syscall OP-TEE#1 (syscall_log) E/LD: region 1: va 0x40006000 pa 0x100062f000 size 0x00d000 flags r-xs (ldelf) ... Therefore, skip the trace if the syscall number it TEE_SCN_LOG. Signed-off-by: Jerome Forissier <jerome@forissier.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
jenswi-linaro
added a commit
that referenced
this pull request
May 27, 2021
Adds checks in e32_relocate() that sym_tab is assigned a symbol table before using it. This fixes coverity scan: CID 1501826 (#1 of 3): Explicit null dereferenced (FORWARD_NULL) CID 1501826 (#2 of 3): Explicit null dereferenced (FORWARD_NULL) CID 1501826 (#3 of 3): Explicit null dereferenced (FORWARD_NULL) Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
a-rybakov
added a commit
to a-rybakov/optee_os-1
that referenced
this pull request
Jun 3, 2021
Fixed description in core_memprot.h Fixed range in tests/invoke.c Removed line in imx_uart.c Signed-off-by: Anton Rybakov <a.rybakov@omp.ru>
jforissier
pushed a commit
that referenced
this pull request
Jun 7, 2021
Adds checks in e32_relocate() that sym_tab is assigned a symbol table before using it. This fixes coverity scan: CID 1501826 (#1 of 3): Explicit null dereferenced (FORWARD_NULL) CID 1501826 (#2 of 3): Explicit null dereferenced (FORWARD_NULL) CID 1501826 (#3 of 3): Explicit null dereferenced (FORWARD_NULL) Acked-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
MrCry0
added a commit
to MrCry0/optee_os
that referenced
this pull request
Oct 2, 2022
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
MrCry0
added a commit
to MrCry0/optee_os
that referenced
this pull request
Oct 2, 2022
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
ricardosalveti
pushed a commit
to ricardosalveti/optee_os
that referenced
this pull request
Apr 3, 2023
This pull request was closed.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Corrected division_qr to work on unsigned ints, and simplified uint_div_qr accordingly
Note - this file is no longer ARM-specific.