CHANGES.md

This is the changelog for Nextstrain CLI. All notable changes in a release will be documented in this file.

This changelog is intended for humans and follows many of the principles from Keep a Changelog.

Versions for this project follow the Semantic Versioning rules. Each heading below is a version released to PyPI and the date it was released. The "NEXT" heading below describes changes in the unreleased development source code and as such may not be routinely kept up to date.

NEXT

This release contains a potentially-breaking change for existing usages of nextstrain remote download. The change is described below.

Improvements

• The local filenames produced by nextstrain remote download now include more of the remote dataset/narrative path. This reduces the potential for ambiguous filenames and makes it easier to copy datasets/narratives between destinations (e.g. from one group to another) while retaining the same path. It is, however, a potentially-breaking change if you're relying on the filenames of the downloaded datasets/narratives (e.g. for automation).

  For example, downloading nextstrain.org/flu/seasonal/h3n2/ha/2y previously produced the local files:

  2y.json
  2y_root-sequence.json
  2y_tip-frequencies.json
  

  which could easily conflict with the similarly-named nextstrain.org/flu/seasonal/h3n2/na/2y, nextstrain.org/flu/seasonal/h1n1pdm/ha/2y, etc. The downloaded files are now named:

  flu_seasonal_h3n2_ha_2y.json
  flu_seasonal_h3n2_ha_2y_root-sequence.json
  flu_seasonal_h3n2_ha_2y_tip-frequencies.json
  

  Within groups, filenames are similarly longer but the group name is not included. For example, downloading groups/blab/ncov/cross-species/cat previously produced:

  cat.json
  cat_root-sequence.json
  cat_tip-frequencies.json
  

  and now produces:

  ncov_cross-species_cat.json
  ncov_cross-species_cat_root-sequence.json
  ncov_cross-species_cat_tip-frequencies.json
  

4.2.0 (29 July 2022)

Bug fixes

• Using remote delete on nextstrain.org now correctly outputs the "Deleting…" message before performing each delete, as intended (and as S3 remotes do). Previously, the message was misleadingly output after each delete was already performed. (#209)

• Detection of the installation method during self-upgrade checks in nextstrain update and nextstrain check-setup now looks for explicit installer metadata files and no longer assumes Pip as the final fallback. If the installation method is not explicitly detected, then no upgrade instructions are shown. Better to suggest nothing than to suggest the wrong thing. (#207)

• An uncaught StopIteration error that could have occurred in very specific and limited circumstances during self-upgrade checks in nextstrain update and nextstrain check-setup can no longer occur. (#207)

Improvements

• The nextstrain remote download, upload, and delete commands now support a --dry-run mode.

  This mode, as is broader convention, goes through the motions of doing the thing, as much as possible, but doesn't actually do the thing. That is, no changes should occur when --dry-run is active.

  This is particularly useful for seeing what will happen if you're unsure of how a path or argument is handled. Dry runs of the list (ls) command don't make sense and aren't included. (#210)

• Installations via a Conda package are now detected during self-upgrade checks and the suggested upgrade command uses mamba install or conda install. (#207)

• Suggested upgrade commands now specify the expected new version so they fail if that version is not found rather than succeed but do nothing (or do something different). (#207)

Development

• A new debugging mode can be enabled by setting the NEXTSTRAIN_DEBUG environment variable to 1 (or another truthy value). Currently the only effect is to print more information about handled (i.e. anticipated) errors. For example, stack traces and parent exceptions in an exception chain are normally omitted for handled errors, but setting this env var includes them. Future debugging and troubleshooting features, like verbose operation logging, will likely also condition on this new debugging mode.

• We now avoid a runtime dep on setuptools by switching from pkg_resources.parse_version to packaging.version.parse. The latter was already transitively in our dep tree. (#207)

4.1.1 (18 July 2022)

Improvements

• The new version check now links out to the changelog for the latest version so you know what you're gonna get.

• The new version check now detects standalone installations and provides correct upgrade instructions.

Development

• The "NEXT" heading (and description) is no longer included in the CHANGES.md file in release artifacts and tags, as it's a development-only section that's always empty in releases.

• The NEXTSTRAIN_CLI_LATEST_VERSION environment variable can be set to 0 to disable the new version check performed by default during nextstrain update and nextstrain check-setup. Other values can be provided to override the result of querying PyPI for the latest version.

• A new command, debugger, was added as a tool to help with troubleshooting environment and execution context issues. The only thing it does is invoke pdb from within the command's context.

4.1.0 (11 July 2022)

Improvements

• The nextstrain remote family of commands now output a nicer error message that's more interpretable and actionable when a server error (HTTP status 5xx) is received during an operation against the nextstrain.org remote.

• The nextstrain remote upload command now outputs a nicer error message that's more interpretable and actionable when the connection to the nextstrain.org remote server is broken during transfer.

• Timestamps are now shown for each line of output from an AWS Batch build.

4.0.0 (24 June 2022)

This release contains two potentially-breaking changes for existing usages. The circumstances and implications of each are described below.

Improvements

• It is now an error (instead of a warning) to use the --image option to nextstrain build when using the "native" runner (either explicitly via --native or implicitly via config set by nextstrain check-setup --set-default). The error message is:

  The --image option is incompatible with the "native" runner (…).
  
  If you need to use the "native" runner, please omit the --image option.
  
  If you need the --image option, please select another runner (e.g.
  with the --docker option) that supports it.  Currently --image is
  supported by the Docker (--docker) and AWS Batch (--aws-batch)
  runners.  You can check if your setup supports these runners with
  `nextstrain check-setup`.
  

  This is a potentially-breaking change as invocations using the "native" runner with the --image option may exist and be working for users as they expect. If you encounter this new error after upgrading but your results of running nextstrain commands has always been as-expected, then you can safely drop the --image option from your invocations and avoid the new error.

• When running a Snakemake workflow, nextstrain build now defaults Snakemake's --cores option to all unless build's own --cpus option is provided. If you provide your own --cores (or equivalent, e.g. -j) option to Snakemake via nextstrain build, as in nextstrain build . --cores 2, then this new default isn't applicable.

  This is a potentially-breaking change if you're…

  • …using Snakemake version 5.10 or earlier (such as via our standard Docker runtime image), and

  • …are not already providing a --cores (or equivalent, e.g. -j) option to Snakemake via nextstrain build, and

  • …expect your nextstrain build invocations to use only a single CPU/core instead of all CPUs/cores available on your computer.

  If this is the case, you can pass --cpus 1 to nextstrain build to regain the original behaviour, e.g. nextstrain build --cpus 1 ..

  This change will allow upgrading of Snakemake in our Docker runtime image without inflicting the addition of --cores (or equivalent) arguments onto every existing nextstrain build invocation that lacks it.

  For context, Snakemake requires the --cores option as of 5.11. This has spawned much discussion (1, 2, 3, 4) where it was made clear this is an intentional, permanent change and a default will not be added. By adding our own default, we can insulate our users from the upstream change and make Nextstrain builds fast-by-default. Our --cpus option can be used to limit CPU usage back from this default if necessary, and users can always specify --cores (or equivalents) themselves.

• The version --verbose and check-setup commands now indicate the default runner in their output, which is useful context when troubleshooting or just plain unsure what the default is.

• The check-setup command now exits with an error code if the default runner is not supported. Prior to this it only exited with an error code if no runners were supported.

Bug fixes

• When using the AWS Batch runner, the --cpus and --memory options for build now correctly override the corresponding resource requests in newer style AWS Batch job definitions. Prior to this they would be ignored by AWS Batch. Older style AWS Batch job definitions were never affected by this and continue to work with --cpus and --memory as expected. See #144 for more details.

• A deprecation warning from the cryptography module (version 37 and higher) when running on Python 3.6 is now suppressed as it's just noise to an end user. This probably moves us closer to dropping 3.6 support ourselves, but it's not so onerous yet.

• The rST to plain text conversion used to format --help text was fixed to avoid emitting \r\n in the wrong context.

• The stdout and stderr streams are now configured at program start to always emit UTF-8. Previously they used the Python defaults, determined in part by the system defaults, which often resolved to UTF-8, but not always. The code base assumes UTF-8, and now the streams are guaranteed to match. In particular, this fixes UnicodeEncodeError issues in some contexts on Windows even when UTF-8 is supported.

Documentation

• This changelog now sports a preamble to set the scene and provide context for the content.

Development

• The source repo now uses a +git local version part to distinguish actual releases from installations of unreleased code. Relatedly, the development builds created by CI use a +git.${commit} local version part to pin down the specific commit from which they were built. This is mostly helpful when reading CI logs or downloading the builds from the CI artifacts.

• The CI workflow has seen some significant sprucing up and additions, including sporting a more typical lifecycle with separate steps for build, test, and release (a new addition). The single test step is also now split between source tests (unit tests, type checking, linting, etc) and dist tests (functional tests, integration tests, interface tests, etc). The release step uploads to PyPI after a release tag is pushed, built, and tested, replacing manual uploads from a local development environment. Various other small improvements to CI were also made.

• We now run CI tests on Windows. \o/ It's not perfect, but this should help avoid basic Windows-only pitfalls which we might not otherwise notice in a timely fashion.

• Our CI now builds (and tests) standalone installation archives (.tar.gz for Linux and macOS, .zip for Windows) comprising of:

  1. A nextstrain executable containing a bundled Python interpreter + the Python stdlib + the Nextstrain CLI code + its dependencies.

  2. External files (lib, data, etc) that are necessary but can't (for a variety of reasons) be bundled into the executable.

  These installation archives can be downloaded, extracted, and run in-place without even a Python interpreter being installed on the host computer, hence the "standalone" moniker.

  Currently these are for development/testing/experimentation purposes only. We include them as assets on GitHub Releases, but do not provide an automated means of "installing" or unpacking them; those are ultimate goals, but this is just a first step towards those. If you try out the standalone archives in the meantime, though, please let us know how it goes (good or bad) by opening an issue with your experience/feedback/questions.

• GitHub Releases are now created by CI after making a release to PyPI. These are visible on the GitHub repo's releases page and various other places on GitHub. Each GitHub Release includes a copy of the relevant changelog section and release assets like the Python distributions and standalone installation archives (see above). Releases on GitHub are currently intended mostly for informational and notification purposes; the primary release distribution method is still PyPI and sources downstream of PyPI (e.g. Conda).

3.2.5 (23 May 2022)

Improvements

• A better error message with a potential remediation is emitted when requests to nextstrain.org fail due to stale user tokens.

Documentation

• The cross-reference to Nextstrain Groups documentation is now up to date with the latest Groups docs.

3.2.4 (6 April 2022)

Bug fixes

• update will no longer overwrite a docker.image config setting when the current/default value includes an explicit latest tag. This change makes it possible to track the "latest" Docker runtime image by manually setting

  [docker]
  image = nextstrain/base:latest

  in ~/.nextstrain/config. (#163)

• update now correctly prunes old images starting from and including the just-updated-from image, instead of accidentally skipping it until the next update. (#163)

• check-setup --set-default now sets the docker.image setting to the most recent build-* image when the Docker runtime is selected as the default. (#168)

3.2.3 (1 April 2022)

Bug fixes

• remote upload to nextstrain.org destinations is no longer exceedingly slow. This was most noticeable for large dataset JSONs. The slowness was a result of poor IO patterns during gzip compression that weren't triggered by S3 destinations. Additionally, after benchmarking, the gzip compression level was reduced from the max (9) to the default (currently 6) as a better compromise between speed and compressed size. (#165)

3.2.2 (28 March 2022)

Documentation

• A new page describes how to upgrade Nextstrain CLI.

• The doc page for nextstrain remote now links to the pages for its subcommands.

• A placeholder in the nextstrain remote list command usage now matches the placeholder used elsewhere in its --help output.

3.2.1 (22 March 2022)

Bug fixes

• remote upload no longer gzip compresses files which are already compressed when uploading them to an S3 remote. This isn't expected in typical usage when uploading Nextstrain dataset (JSON) or narrative (Markdown) files but arises when uploading related files to an S3 remote (e.g. a metadata.tsv.gz file to s3://nextstrain-data/files/zika/). (#161)

Development

• The CI workflow setup steps were simplified a bit.

3.2.0 (9 March 2022)

Bug fixes

• check-setup no longer errors when, on some systems, awk outputs a large number (bytes of memory reported by /proc/meminfo) in exponential notation. (#159)

Features

• The view and remote family of commands now support "measurements" dataset sidecar files. (#156)

3.1.1 (4 March 2022)

Bug fixes

• The Docker runtime now avoids merging stdout and stderr together when at least one of stdout or stderr isn't a console (TTY), e.g. when redirecting one or both streams to a file or piping output to another command. (#155)

• A global lockfile is now used for reading/writing config files instead of locking the config files themselves. This resolves a regression on Windows introduced in 3.0.4 which manifested as an [Errno 13] Permission denied error when running nextstrain update and nextstrain check-setup --set-default. (#157)

Documentation

• The changelog now notes two minor (har har) semantic versioning mistakes in previous releases.

3.1.0 (1 March 2022)

Features

• remote family of commands now support interacting with nextstrain.org's web API using the credentials established by the login command.

  See the nextstrain.org remote documentation for more information.

• login now sports a --renew flag to request new tokens with refreshed user information (e.g. group memberships).

Bug fixes

• build now exits 1 (an error) when the AWS Batch job fails due to infrastructural issues like the EC2 instance its running on being terminated. Previously it exited 0 (success) despite the job not being successful.

• check-setup now supports Docker hosts with cgroups v2 and better handles failures in the memory limits check.

• Messages related to automatic login (authn) management are now send to stderr instead of stdout.

• remote delete messages now correctly imply each deletion is just about to happen instead of just happened already.

• The messages produced when an internal error is detected now suggest filing an issue on GitHub to report the bug.

Documentation

• The specific release version will now be displayed under the project name in the sidebar of the documentation pages.

Development

• Many breakages of our CI caused by external changes in upstream testing deps are now resolved.

3.0.6 (26 January 2022)

Documentation

• The organization of the documentation sidebar menu is now improved to show more of the pages instead of burying them in subpage table of contents.

• The formatting of --help output is now slightly improved with regard to links, but more importantly, richer formatting of content shared between --help and the online documentation is now possible.

3.0.5 (20 December 2021)

This release should have bumped the minor version, not the patch version, since it added a new feature. —trs, 1 March 2022

Features

• view now supports a --host option to specify the IP address or hostname on which to listen, complementing the existing --port option. --allow-remote-access is now an alias for --host=0.0.0.0.

Paper cut remedies

• netifaces is no longer a dependency since its lack of wheels for recent Python versions means it often requires a C toolchain for installation. This impacted multiple platforms, including Windows and Linux. For more context, see discussion starting with this issue comment.

  Unfortunately the package no longer has a maintainer, so we can't count on any timeline for updates and do not have the resources to maintain it ourselves. Dropping the dep makes the UX of nextstrain view --allow-remote-access a bit poorer, but makes installation a lot easier.

3.0.4 (3 November 2021)

This release should have bumped the minor version, not the patch version, since it added new features/commands. —trs, 1 March 2022

Features

• Three new commands—login, logout, and whoami—for authenticating with nextstrain.org. These commands manage tokens stored in ~/.nextstrain/secrets. No other commands currently use the tokens, but future features will start using them, e.g. for managing datasets and narratives on nextstrain.org with the remote family of commands.

Bug fixes

• Adjusted dependencies on s3fs and aiobotocore to avoid incompatible versions being selected by pip.

  aiobotocore released a new version, 2.0.0, with breaking changes and pip's resolution algorithm chose an older s3fs version which was "compatible" by dep declaration by not actually in practice, leading to nextstrain build --aws-batch throwing errors at runtime.

• update: Explicitly handle errors from the Docker Hub registry.

Documentation

• AWS Batch: Documented the unintuitive interaction of compute envs and launch template versions and updated the disk space section for Amazon Linux 2 compute environments.

• Updated various links that had moved.

Development

• Ditched Pipenv for a plain venv setup.

• Dependencies for Read The Docs and CI docs builds are no longer pinned but will use the latest versions that otherwise meet standard dep declarations.

• Added pyright tests for additional type checking. This covers some kinds of checks that mypy does not, and in particular lets us use protocol types to check the Runner and Remote module interfaces.

• Enabled more mypy checks and resolve findings.

• Tests now treat warnings as errors so we can address them, and CI is now warnings clean.

  Python warnings are important to see earlier than later so we can avoid spewing warnings to users.

  Sphinx warnings are often authoring mistakes that need to be addressed.

3.0.3 (23 February 2021)

Documentation

• The help output for build now correctly describes the default behaviour of the --download and --no-download options.

• The help output for build now warns about the need to escape wildcards or quote the whole pattern when using --download so as to avoid expansion by the shell.

3.0.2 (16 February 2021)

Bug fixes

• update more gracefully handles Docker not being installed. Although the command still exits with error (as it currently serves only to pull the latest Docker image), an uncaught exception isn't thrown. More improvements to come later with #87.

• version now gracefully handles Docker not being installed when --verbose is given instead of throwing an uncaught exception.

• version now includes Python information when --verbose is given, which is helpful for debugging Python issues, e.g. which Python install is being used.

• The Docker (--docker) runner for build, shell, and view no longer requests a TTY connected to the container when stdin is not itself a TTY (e.g. run from a non-interactive shell). This avoids a fatal error from Docker ("the input device is not a TTY").

• Distribution metadata was fixed so that the LICENSE file is no longer attempted to be installed under the Python installation prefix (e.g. /usr/local). It is instead included inside the "egg-info" directory alongside the code in the Python site libraries.

Development

• Revamp CI by switching from Travis CI to GitHub Actions, expanding the test matrix to macOS and Python 3.9, and adding an integration test for the "native" build runner.

3.0.1 (12 February 2021)

Hotfix for a missing transitive dependency on s3fs via fsspec, which caused nextstrain build --aws-batch invocations to fail when s3fs was not installed.

3.0.0 (11 February 2021)

The minimum Python version for installing the Nextstrain CLI itself is now 3.6.

Features

• build: Uploads and downloads for remote AWS Batch builds are now streamed without the use of temporary local files. This halves the local storage overhead needed and also speeds up the transfer of large builds since:

  1. Uploading can start immediately without first writing the whole archive locally
  2. Unmodified files do not need to be downloaded, just their metadata

• build: The results of remote builds may now be selectively downloaded (or not downloaded at all). Two new nextstrain build options are available:

  --download <pattern>
  --no-download
  

  The former may be given multiple times and specifies patterns to match against build dir files which were modified by the remote build. The latter skips downloading results entirely, which is useful if all you care about are the logs (such as when re-attaching to a build or when a build uploads results itself elsewhere). The default is still to download every modified file.

  Currently this functionality is limited to AWS Batch (--aws-batch) builds, as it is the only remote environment supported.

Bug fixes

• build: Python bytecode files (__pycache__ and *.pyc) are no longer uploaded or downloaded from remote builds on AWS Batch.

• build: Log messages about individual file uploads/downloads to AWS Batch are now printed before each operation, instead after, so you can see what files are taking a while instead of being in the dark until it completes.

• remote download: A better error message is now produced when a prefix-less s3:// URL is provided without the --recursively option.

Documentation

• Clarify how remote builds on AWS Batch acquire AWS credentials.

• Fix broken links into AWS documentation for boto3.

• Switch to our Nextstrain theme for Sphinx

• Some documentation has been shuffled around to better fit within the larger docs.nextstrain.org effort. Redirects were put into place for any moved RTD URLs.

Development

• Various improvements to the Read The Docs and Sphinx setup.

• Upgrade locked Pipenv development environment.

• Fix type checking failures under newer versions of mypy.

2.0.0.post1 (15 June 2020)

Documentation

• The AWS Batch documentation and 2.0.0 release notes (below) now include information about the additional necessity of granting users the ability to iam:PassRole for the role used by Batch jobs.

2.0.0 (2 June 2020)

Features

• build: The AWS Batch runner now supports overriding the image hardcoded in the Batch job definition. Use the --image command-line option, the NEXTSTRAIN_DOCKER_IMAGE environment variable, or the docker.image config setting. This means that both --docker and --aws-batch builds will now use the same container image, increasing reproducibility and customizability.

  This is a potentially-breaking change, as it requires your AWS IAM users are allowed to perform the batch:RegisterJobDefinition action and iam:PassRole for the your configured job role (typically NextstrainJobsRole). The example NextstrainJobsAccessToBatch IAM policy in the AWS Batch docs is updated to reflect these new privileges.

• build: The new --cpus and --memory options allow limits to be specified for containerized (Docker, AWS Batch) builds. These both automatically inform Snakemake's resource scheduler and the AWS Batch instance size selection. If your builds use Snakemake-based workflows, using these new options is better than specifying --cores … or --resources mem_mb=… directly.

• version: Verbose output now includes the "native" versions of Augur and Auspice, if available.

Bug fixes

• view: Auspice v2 dataset JSONs are now detected and included in the list of available datasets message printed to the console.

• view: Auspice v1 datasets are now only listed if both the tree and meta JSON files exist. Previously, incomplete datasets with only the tree JSON were listed.

Documentation

• The README now documents known issues with Windows.

Development

• Pipenv is now used to provide an easier and more consistent development environment.

• pytest is now used to run mypy, flake8, and doctests.

1.16.7 (20 May 2020)

Bug fixes

• AWS Batch builds are now more resilient in the face of transient network or client errors when uploading the build directory and following build logs. Thanks Tony Tung!

1.16.6 (20 May 2020)

Bug fixes

• The previous release did not pass mypy's type checks due to a technicality; mypy has now been placated.

Documentation

• check-setup: Success or failure is (hopefully) more clearly messaged now. This was muddied over time by adding support for the native and AWS Batch runners, and we've seen several support requests because of confusion here.

• Installation instructions in the README now document all supported computing environments, or "runners". Pipx is also mentioned as a nice alternative to Pip.

• Detaching from AWS Batch builds with --detach and Control-Z is now mentioned in the AWS Batch documentation.

• A direct reference to the AWS Batch User Guide on memory management details was added, because AWS docs can be hard to navigate.

• The units documented to be used by the --aws-batch-memory option are now correct.

• Runner-selection options (--docker, --native, --aws-batch) are now in their own option group to reduce clutter among the help output. They are only visible with --help-all now, like development options. With the use of nextstrain check-setup --set-default now emphasized, these options need not be as prominent.

• The top-level description in nextstrain --help output now says more than three words. :D

1.16.5 (22 April 2020)

Features

• build: AWS Batch jobs now require Ctrl-C to be pressed twice within 10s to cancel a job. This is an additional guard on top of 1.16.4's change so that if you accidentally press Ctrl-C once you can't accidentally press it again 30 minutes later and ruin your build.

1.16.4 (22 April 2020)

Features

• build: AWS Batch jobs now require Ctrl-C to be pressed twice to cancel the job. This guards a potentially unwanted action from being used accidentally by requiring confirmation with a second Ctrl-C.

• build: AWS Batch jobs now report the current job status when re-attaching. Previously the current job status was never reported, only the next status transition. For a PENDING or RUNNING job, it might be some time to the next transition.

1.16.3 (22 April 2020)

Features

• build: AWS Batch jobs now include more detail about why the container exited when available. This surfaces useful messages like "OutOfMemoryError: Container killed due to memory usage" in addition to the exit status.

Documentation

• check-setup: Describe how --set-default chooses an environment. Thanks Mary Larrousse!

Bug fixes

• Fix missing import in our gzip utilities which could cause a runtime error (NameError) when running nextstrain remote download on S3 objects with a Content-Encoding header set to a value other than gzip or deflate. This circumstance is unlikely, but not impossible.

Development

• Use Flake8 for static runtime safety and correctness checks

1.16.2 (16 March 2020)

Bug fixes

• deploy/remote upload: Some files, but not all, were being truncated during upload due to a bug in gzip compression handling. Now the whole file makes it to its destination. More details in #62.

• build: The default arguments for snakemake are no longer used if a different program to run is specified with --exec.

1.16.1 (25 February 2020)

Documentation

• Update README to include the latest usage information, which mentions the new remote command.

1.16.0 (25 February 2020)

Features

• The deploy command is now an alias for the remote upload command.

• The new remote list, remote download, and remote delete commands allow listing, downloading, and deleting remote datasets and narratives which were uploaded using deploy / remote upload. Currently only direct s3:// destinations are supported, but its anticipated that Nextstrain Groups will be supported as first-class destinations in the future.

Bug fixes

• deploy/remote upload: Invalid credentials are now properly caught and messaged about.

• deploy/remote upload: Files are now deployed/uploaded using streaming compression instead of buffering the whole file in memory first.

1.15.0 (18 February 2020)

Features

• Environment variables for AWS credentials (AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, and AWS_SESSION_TOKEN) are now passed through to builds. This lets builds which use data on S3 to work transparently, for example.

• Environment variables for ID3C (ID3C_URL, ID3C_USERNAME, and ID3C_PASSWORD) are now passed through to builds. This lets Seattle Flu Study builds which use data in an ID3C instance to work transparently.

1.14.0 (24 September 2019)

No changes since 1.14.0b1, described below.

1.14.0b1 (17 September 2019)

Features

• The build command now supports detaching from and re-attaching to builds run on AWS Batch (--aws-batch).

  This adds a feature we've wanted from the beginning of the CLI. By starting the build with --detach, a remote job is submitted and the command necessary to --attach to the job later is printed. This command includes the job id and can be used as many times as desired, including while the remote job is running or after it has completed. It will even work on other computers or for other people, although you may need to modify the local build path to a directory of your choosing. The directory may be empty, in which case all build context will be restored there from the remote job.

  AWS Batch builds may also be interactively detached by pressing Control-Z. Normally this would suspend a Unix process (which could then be resumed with fg or bg or SIGCONT), but in the same spirit, nextstrain build will detach from the remote job instead and exit the local process. This also parallels nicely with our existing Control-C job cancellation support.

  There are currently no facilities to track job state locally or list outstanding jobs, but these features may be added later if it seems they'd be useful. As it stands with this new feature, one pattern for launching multiple detached jobs and picking them up later is:

  # Loop over several `nextstrain build` commands, appending the last
  # line to a shell script.
  nextstrain build --aws-batch --detach build-a/ | tail -n1 | tee -a pickup-jobs.sh
  nextstrain build --aws-batch --detach build-b/ | tail -n1 | tee -a pickup-jobs.sh
  …
  
  # Then, sometime later:
  bash pickup-jobs.sh
  

• The --aws-batch runner for the build command no longer requires permission to perform the globally-scoped AWS IAM action s3:ListAllMyBuckets. Instead, it uses the HEAD <bucket> S3 API which requires either s3:ListBucket, which can be scoped to specific buckets in IAM grants, or s3:HeadBucket, which is globally-scoped but does not reveal bucket names. More details on these IAM actions are in the S3 documentation.

1.13.0 (10 September 2019)

Features

• The deploy command no longer requires permission to perform the globally-scoped AWS IAM action s3:ListAllMyBuckets. Instead, it uses the HEAD <bucket> S3 API which requires either s3:ListBucket, which can be scoped to specific buckets in IAM grants, or s3:HeadBucket, which is globally-scoped but does not reveal bucket names. More details on these IAM actions are in the S3 documentation.

1.12.0 (5 September 2019)

Features

• The deploy command now supports files other than JSON data files, such as Markdown narratives, by setting the correct content type on upload.

1.11.2 (3 September 2019)

Bug fixes

• This release fixes a regression in the view command which caused "connection reset" or "empty response" errors. The regression only affected versions 1.11.0 and 1.11.1 of the Nextstrain CLI when used with Auspice 1.38.0 via the nextstrain/base:build-20190828T223744Z image. Thanks to Thomas Adams for the excellent bug report!

1.11.1 (30 August 2019)

Bug fixes

• The check-setup command no longer errors when Docker isn't installed.

1.11.0 (30 August 2019)

Features

• The view command now supports --native flag to run in the native ambient environment.

• The check-setup command now supports a --set-default flag to save the first supported environment to the Nextstrain CLI's config file. This means that you don't have to specify --native (or --aws-batch) every time if you don't have/want Docker support.

Bug fixes

• The --verbose flag to the version command will no longer cause the Docker image to be downloaded when it isn't available locally.

Documentation

• Describe the somewhat annoying process of how to increase the disk space available to AWS Batch jobs in the AWS Web Console.

1.10.2 (23 August 2019)

Bug fixes

• The environment variables used by Augur are now passed through to --docker and --aws-batch builds.

1.10.1 (26 March 2019)

Features

• The view command now sports a --port option to use an alternate port for the viewer.

1.10.0 (22 February 2019)

Features

• Add ability to specify vCPU and memory when running AWS Batch jobs via --aws-batch-cpus and --aws-batch-memory or via specification in ~/.nextstrain/config or via environment variables NEXTSTRAIN_AWS_BATCH_CPUS and NEXTSTRAIN_AWS_BATCH_MEMORY. This requires corresponding proper setup of compute environment in AWS Batch console.

1.9.1 (11 February 2019)

Features

• Restore the modification times of files when unzipping results from an AWS Batch run. This allows Snakemake's dependency resolution to properly determine file staleness, which in turn allows local builds to continue where AWS Batch builds leave off (e.g. running the bulk of the computation on AWS Batch and then iterating on subsequent trivial steps locally).

1.9.0 (8 February 2019)

Features

• Builds run on AWS Batch no longer delete the build dir zip file from S3 or the job log stream from CloudWatch, making it easier to debug and troubleshoot Batch builds. The Batch setup documentation is updated to note that the previously suggested retention policies are now the only thing preventing runaway data storage costs (and thus a must).

Bug fixes

• Declare missing dep on setuptools, used via pkg_resources by the check-setup and update commands. setuptools nearly always exists already on Python installs, especially when nextstrain-cli is installed using pip, but nearly always is not always.

Development

• Static type checking now passes again thanks to a work around for a mypy bug related to namespace packages.

1.8.1 (21 January 2019)

Features

• The check-setup command now tests if the local Docker image is new enough for this version of the CLI.

1.8.0 (18 January 2019)

Bug fixes

• Docker images between build-20190115T232255Z and build-20190116T000613Z (inclusive) broke the nextstrain view command. It is fixed in this version of the CLI, 1.8.0, in tandem with new images, starting with build-20190119T045444Z. If your view command is broken, running nextstrain update and following the instructions to upgrade to version 1.8.0 of the CLI should resolve the issue.

• AWS Batch builds now avoid uploading files matching environment* in the build directory, as such files are commonly used for storing sensitive environment values.

1.7.3 (28 December 2018)

Features

• The automatic check for newer versions of the CLI, which happens on the update and check-setup commands, now produces a better, more-likely-to-work suggested invocation of pip to perform the upgrade.

1.7.2 (28 December 2018)

Features

• The build command now runs snakemake with the --printshellcmds option for improved log output.

Bug fixes

• User-provided paths are now resolved strictly—they must exist—on both Python 3.5 and ≥3.6, not just 3.5. This discrepancy was unlikely to result in any noticeable problems because of other existence checks which were performed. Nevertheless, the change is good housekeeping and helps ensure robustness.

• The update command no longer errors on Python 3.6.0 and 3.6.1 when the ~/.nextstrain/ does not exist (for example, when upgrading from CLI versions before 1.7.0). #37

Development

• Continuous integration testing now includes a much fuller range of Python versions in order to more quickly catch bugs like the one affecting update above.

• Continuous integration testing switched to running the zika-tutorial, a simplified build more suitable for our needs.

1.7.1 (5 December 2018)

Bug fixes

• The shell command no longer throws an unexpected exception about a missing warn() function when a non-existent build directory is given. The user-friendly error is printed instead, as expected.

1.7.0 (26 November 2018)

Features

• Builds can now be run remotely on AWS Batch by passing the --aws-batch flag to the build command. See nextstrain build --help for more information. Setup required to support this is documented in doc/aws-batch.md.

• The update command now pulls down new images by their build-* tag instead of tracking the mutable latest tag. Our build tags are, most importantly, not updated after creation and thus are suitable references for reproducible runs. The output of nextstrain version --verbose now includes the specific build tag.

• The check-setup command now tests the amount of memory available to containers and warns if it less than 2GB. This is particularly important on Windows and macOS where Linux containers are run inside a VM on the host. The VM may have limited memory allocated to it, leading to out-of-memory errors in builds.

Documentation

• Installation instructions in the README are now more detailed.

• A big picture overview of where the CLI fits into the Nextstrain ecosystem is included in the README for situating newcomers.

• The README now refers to Docker Desktop, the new name for Docker Community Edition.

1.6.1 (25 September 2018)

Features

• The shell command announces you're entering the build environment, prints information about mapped volumes, and describes how to leave the environment.

1.6.0 (18 September 2018)

Bug fixes

• On Windows, fix an issue where the build and shell commands spawn the docker run process but also immediately return the user to the command-line. For shell, the situation was weirder still because the user ended up with two command prompts (cmd.exe and bash) but only one appeared to win when reading from the shared stdin.

1.5.0 (4 September 2018)

Features

• The build command now supports a --native flag to run the build outside of any container image, that is, within the ambient environment. That environment might be provided by conda or a cluster module system or custom installs or some other thing. Docker remains the default, although it may be explicitly specified with --docker. Other runners are planned for the future. The idea is that the cli as a user-facing tool for Nextstrain is separate from a containerized Nextstrain environment (although the two work well together).

• The build, view, and shell commands now show an abbreviated set of common options when passed --help. The full set of options is available using --help-all. The idea is to make the initial output more approachable.

Development

• The README now describes how to annotate the type of variable and use other typing features in a way that's compatible with Python 3.5

• Package metadata for PyPi is slightly improved.

1.4.1 (11 August 2018)

Documentation

• Minor updates to README and command help strings

1.4.0 (9 August 2018)

Features

• A new shell command launches an interactive shell (bash) inside the build environment, which is useful for running ad-hoc commands and debugging.

1.3.0 (9 August 2018)

Features

• The update command now prunes old Docker images after downloading new ones. This functionality relies on our new, labeled images. Older images will have to be manually pruned as a one-time step. See docker image prune for more information. Note that locally built images which are tagged nextstrain/base:latest will be pruned when update is run. Protect such images by giving them an additional tag.

• The versions of the Docker image and individual Nextstrain components in the image are shown when the version command is run with the --verbose flag.

1.2.0 (1 August 2018)

Features

• A new deploy command supports uploading data files to S3, allowing the complete pathogen build lifecycle to happen using this package.

• The check-setup and update commands now check if the CLI itself is out of date and could be updated.

Documentation

• Brief descriptions of the changes in each release are now kept in the CHANGES.md file. You're reading it!

Development

• Describe basic development practices for this package in the README.

• Commit to semantic versioning, which I'd been neglecting previously when bumping versions.

• Static type checking is now supported for a small fraction of the source code and runs clean under mypy. This is included in Travis CI testing. The goal is to add more type annotations going forward.