Uninitialized variable use #1

ghost · 2020-04-25T03:31:53Z

There is certainly a problem in that commit that introduced those changes. I'm not sure if this change is enough of a fix for my problem but it is a start.
Also I must add that I didn't have the time to test it yet if this fixed the problem completely. Just get sick of waiting over a year for someone else to fix. If it is wrong I'm sure internet will correct it :)

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200409181311.30247-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>

In the old txt situation we add/describe only properties that are used by the driver/hardware itself. With yaml it also filters things in a node that are used by other drivers like 'power-domains' for rk3399, so add it to 'rockchip-i2s.yaml'. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200324094149.6904-3-jbx6244@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>

Commit 52120e8 ("dt-bindings: display: fix panel warnings") removed the dsi unit name, but missed to remove the 'reg' property, which causes the following 'make dt_binding_check' warning: Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.example.dts:17.5-29.11: Warning (unit_address_vs_reg): /example-0/dsi: node has a reg or ranges property, but no unit name Fix it by removing the unneeded 'reg' property. Fixes: 52120e8 ("dt-bindings: display: fix panel warnings") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200328183641.11226-1-festevam@gmail.com (cherry picked from commit dcde9c0) Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Commit 52120e8 ("dt-bindings: display: fix panel warnings") removed the dsi unit name, but missed to remove the 'reg' property, which causes the following 'make dt_binding_check' warning: Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.example.dts:17.5-29.11: Warning (unit_address_vs_reg): /example-0/dsi: node has a reg or ranges property, but no unit name Fix it by removing the unneeded 'reg' property. Fixes: 52120e8 ("dt-bindings: display: fix panel warnings") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200328183641.11226-2-festevam@gmail.com (cherry picked from commit b1e4475) Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Both port and ports names may be used in a panel-lvds binding port - for a single port ports - if there is more than one port in sub-nodes Fixes the following warning: advantech,idk-2121wr.example.dt.yaml: panel-lvds: 'port' is a required property advantech,idk-2121wr.yaml needs several ports, so uses a ports node. v2: - Use oneOf - makes the logic more obvious (Rob) - Added Fixes tag - Added port: true, ports:true v3: - Indent port/ports in required two spaces (Rob) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh@kernel.org> Fixes: 8efef33 ("dt-bindings: display: Add idk-2121wr binding") Cc: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20200412132139.11418-2-sam@ravnborg.org (cherry picked from commit 8089a62) Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Some drivers (e.g. sun4i-drm) need this info to decide whether they need to enable dithering. Currently driver reports what panel supports and if panel supports 8 we don't get dithering enabled. Hardcode BPC to 6 for now since that's the only BPC that driver supports. Fixes: 6aa1926 ("drm/bridge: Add Analogix anx6345 support") Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200329222253.2941405-1-anarsoul@gmail.com

Free block_cb memory when asked to be deleted. Fixes: 978703f ("netfilter: flowtable: Add API for registering to flow table events") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Some Google Apex Edge TPU devices have a class code of 0 (PCI_CLASS_NOT_DEFINED). This prevents the PCI core from assigning resources for the Apex BARs because __dev_sort_resources() ignores classless devices, host bridges, and IOAPICs. On x86, firmware typically assigns those resources, so this was not a problem. But on some architectures, firmware does *not* assign BARs, and since the PCI core didn't do it either, the Apex device didn't work correctly: apex 0000:01:00.0: can't enable device: BAR 0 [mem 0x00000000-0x00003fff 64bit pref] not claimed apex 0000:01:00.0: error enabling PCI device f390d08 ("staging: gasket: apex: fixup undefined PCI class") added a quirk to fix the class code, but it was in the apex driver, and if the driver was built as a module, it was too late to help. Move the quirk to the PCI core, where it will always run early enough that the PCI core will assign resources if necessary. Link: https://lore.kernel.org/r/CAEzXK1r0Er039iERnc2KJ4jn7ySNUOG9H=Ha8TD8XroVqiZjgg@mail.gmail.com Fixes: f390d08 ("staging: gasket: apex: fixup undefined PCI class") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Debugged-by: Luís Mendes <luis.p.mendes@gmail.com> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Todd Poynor <toddpoynor@google.com>

If the __copy_from_user function failed we need to call sg_remove_request in sg_write. Link: https://lore.kernel.org/r/610618d9-e983-fd56-ed0f-639428343af7@huawei.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/20200413170501.13381-1-flameeyes@flameeyes.com Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The firmware driver is optional, but the power driver depends on it, which needs to be reflected in Kconfig to avoid link errors: aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr': zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn' The firmware driver can probably be allowed for compile-testing as well, so it's best to drop the dependency on the ZYNQ platform here and allow building as long as the firmware code is built-in. Fixes: ab27264 ("drivers: soc: xilinx: Add ZynqMP PM driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200408155224.2070880-1-arnd@arndb.de Signed-off-by: Michal Simek <michal.simek@xilinx.com>

The function “platform_get_irq” can log an error already. Thus omit a redundant message for the exception handling in the calling function. This issue was detected by using the Coccinelle software. Fixes: 3f68be7 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY") Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/76f24122-4d3f-7670-9f06-edb4731a0661@web.de

Fix the following sparse warning: drivers/firmware/xilinx/zynqmp-debug.c:38:15: warning: symbol 'firmware_debugfs_root' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200415084311.24857-1-yanaijie@huawei.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>

We are racing to initialize sched->thread here, just always check the current thread. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Link: https://patchwork.freedesktop.org/patch/361303/

As mentioned slightly out of patch context in the code, there is no reset routine for the chip. On boards where the chip is supplied by a fixed regulator, it might not even be resetted during (e.g. watchdog) reboot and can be in any state. If the device is probed with VAG enabled, the driver's probe routine will generate a loud pop sound when ANA_POWER is being programmed. Avoid this by properly disabling just the VAG bit and waiting the required power down time. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Fabio Estevam <festivem@gmail.com> Link: https://lore.kernel.org/r/20200414181140.145825-1-sebastian.reichel@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>

At the moment, PCM devices for DPCM are only created based on the dpcm_playback/capture parameters of the DAI link, without considering if the CPU/FE DAI is actually capable of playback/capture. Normally the dpcm_playback/capture parameter should match the capabilities of the CPU DAI. However, there is no way to set that parameter from the device tree (e.g. with simple-audio-card or qcom sound cards). dpcm_playback/capture are always both set to 1. This causes problems when the CPU DAI does only support playback or capture. Attemting to open that PCM device with an unsupported stream type then results in a null pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128 Internal error: Oops: 96000044 [#1] PREEMPT SMP CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1 pc : invalidate_paths_ep+0x30/0xe0 lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8 Call trace: invalidate_paths_ep+0x30/0xe0 snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8 dpcm_path_get+0x38/0xd0 dpcm_fe_dai_open+0x70/0x920 snd_pcm_open_substream+0x564/0x840 snd_pcm_open+0xfc/0x228 snd_pcm_capture_open+0x4c/0x78 snd_open+0xac/0x1a8 ... ... because the DAI playback/capture_widget is not set in that case. We could add checks there to fix the problem (maybe we should anyway), but much easier is to not expose the device as playback/capture in the first place. Attemting to use that device would always fail later anyway. Add checks for snd_soc_dai_stream_valid() to the DPCM case to avoid exposing playback/capture if it is not supported. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200415104928.86091-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>

For some reason, the MI2S DAIs do not have channels_min/max defined. This means that snd_soc_dai_stream_valid() returns false, i.e. the DAIs have neither valid playback nor capture stream. It's quite surprising that this ever worked correctly, but in 5.7-rc1 this is now failing badly: :) Commit 0e9cf4c ("ASoC: pcm: check if cpu-dai supports a given stream") introduced a check for snd_soc_dai_stream_valid() before calling hw_params(), which means that the q6i2s_hw_params() function was never called, eventually resulting in: qcom-q6afe aprsvc:q6afe:4:4: no line is assigned ... even though "qcom,sd-lines" is set in the device tree. Commit 9b5db05 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported") now even avoids creating PCM devices if the stream is not supported, which means that it is failing even earlier with e.g.: Primary MI2S: ASoC: no backend playback stream Avoid all that trouble by adding channels_min/max for the MI2S DAIs. Fixes: 24c4cbc ("ASoC: qdsp6: q6afe: Add q6afe dai driver") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200415150050.616392-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>

As done in already existing cases, we should use le32_to_cpu macro while accessing hdr->magic. Found with sparse. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20200415162435.31859-2-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>

On Baytrail/Cherrytrail, the Atom/SST driver fails miserably: [ 9.741953] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01 [ 9.832992] intel_sst_acpi 80860F28:00: FW sent error response 0x40034 [ 9.833019] intel_sst_acpi 80860F28:00: FW alloc failed ret -4 [ 9.833028] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5 [ 9.833033] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5 [ 9.833037] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed [ 9.853942] intel_sst_acpi 80860F28:00: FW sent error response 0x40034 [ 9.853974] intel_sst_acpi 80860F28:00: FW alloc failed ret -4 [ 9.853984] intel_sst_acpi 80860F28:00: sst_get_stream returned err -5 [ 9.853990] sst-mfld-platform sst-mfld-platform: ASoC: DAI prepare error: -5 [ 9.853994] Baytrail Audio Port: ASoC: prepare FE Baytrail Audio Port failed Commit b56be80 ("ASoC: soc-pcm: call snd_soc_dai_startup()/shutdown() once") was the initial problematic commit. Commit 1ba616b ("ASoC: soc-dai: fix DAI startup/shutdown sequence") was an attempt to fix things but it does not work on Baytrail, reverting all changes seems necessary for now. Fixes: 1ba616b ("ASoC: soc-dai: fix DAI startup/shutdown sequence") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200415030437.23803-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>

The parent SSI of a multi-SSI setup must be fully setup, started and stopped since it is also part of the playback/capture setup. So only skip the SSI (as per commit 203cdf5 ("ASoC: rsnd: SSI parent cares SWSP bit") and commit 597b046 ("ASoC: rsnd: control SSICR::EN correctly")) if the SSI is parent outside of a multi-SSI setup. Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20200415141017.384017-2-matthias.blankertz@cetitec.com Signed-off-by: Mark Brown <broonie@kernel.org>

The HDMI?_SEL register maps up to four stereo SSI data lanes onto the sdata[0..3] inputs of the HDMI output block. The upper half of the register contains four blocks of 4 bits, with the most significant controlling the sdata3 line and the least significant the sdata0 line. The shift calculation has an off-by-one error, causing the parent SSI to be mapped to sdata3, the first multi-SSI child to sdata0 and so forth. As the parent SSI transmits the stereo L/R channels, and the HDMI core expects it on the sdata0 line, this causes no audio to be output when playing stereo audio on a multichannel capable HDMI out, and multichannel audio has permutated channels. Fix the shift calculation to map the parent SSI to sdata0, the first child to sdata1 etc. Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec.com Signed-off-by: Mark Brown <broonie@kernel.org>

If we don't find any pcm, pcm will point at address at an offset from the the list head and not a meaningful structure. Fix this by returning correct pcm if found and NULL if not. Found with coccinelle. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20200415162849.308-1-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>

…rom Matthias Blankertz <matthias.blankertz@cetitec.com>: This fixes two issues in the snd-soc-rcar driver blocking multichannel HDMI audio out: The parent SSI in a multi-SSI configuration is not correctly set up and started, and the SSI->HDMI channel mapping is wrong. With these patches, the following device tree snippet can be used on an r8a7795-based platform (Salvator-X) to enable multichannel HDMI audio on HDMI0: rsnd_port1: port@1 { rsnd_endpoint1: endpoint { remote-endpoint = <&dw_hdmi0_snd_in>; dai-format = "i2s"; bitclock-master = <&rsnd_endpoint1>; frame-master = <&rsnd_endpoint1>; playback = <&ssi0 &ssi1 &ssi2 &ssi9>; }; }; With a capable receiver attached, all of 2ch (stereo), 6ch (e.g. 5.1) and 8ch audio output should work. Matthias Blankertz (2): ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode sound/soc/sh/rcar/ssi.c | 8 ++++---- sound/soc/sh/rcar/ssiu.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) base-commit: 7111951 -- 2.26.0

Since its inception the module was meant to be disabled by default, but the original commit failed to add the relevant property. Fixes: 4aba4cf ("ARM: dts: bcm2835: Add the DSI module nodes and clocks") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

If looking up the DT "firmware-name" property fails in q6v6_probe(), the function returns without freeing the remoteproc structure that has been allocated. Fix this by jumping to the free_rproc label, which takes care of this. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20200403175005.17130-3-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

If an error occurs in q6v5_probe() after the proxy power domains are attached, but before qcom_add_ipa_notify_subdev() is called, qcom_remove_ipa_notify_subdev() is called in the error path, which is a bug. Fix this by having that call be reached through a different label. Additionally, if qcom_add_sysmon_subdev() returns an error, the subdevs that had already been added will not be properly removed. Fix this by having the added subdevs (including the IPA notify one) be removed in this case. Finally, arrange for the sysmon subdev to be removed before the rest in the event rproc_add() returns an error. Have cleanup activity done in q6v5_remove() be done in the reverse order they are set up in q6v5_probe() (the same order they're done in the q6v5_probe() error path). Use a local variable for the remoteproc pointer, which is used repeatedly. Remove errant semicolons at the end of two function blocks. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20200403175005.17130-4-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dma_addr_t and phys_addr_t are distinct types and must not be mixed, as both the values and the size of the type may be different depending on what the remote device uses. In this driver the compiler warns when the two types are different: drivers/remoteproc/mtk_scp.c: In function 'scp_map_memory_region': drivers/remoteproc/mtk_scp.c:454:9: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] 454 | &scp->phys_addr, GFP_KERNEL); | ^~~~~~~~~~~~~~~ | | | phys_addr_t * {aka unsigned int *} In file included from drivers/remoteproc/mtk_scp.c:7: include/linux/dma-mapping.h:642:15: note: expected 'dma_addr_t *' {aka 'long long unsigned int *'} but argument is of type 'phys_addr_t *' {aka 'unsigned int *'} 642 | dma_addr_t *dma_handle, gfp_t gfp) Change the phys_addr member to be typed and named according to how it is allocated. Fixes: 63c13d6 ("remoteproc/mediatek: add SCP support for mt8183") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200408155450.2186471-1-arnd@arndb.de Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Previously, http://wireless.kernel.org would redirect to https://wireless.wiki.kernel.org, however, this is no longer the case and most pages return 404. https is used because http://wireless.kernel.org/* redirects to https://wireless.wiki.kernel.org/* Signed-off-by: Nils ANDRÉ-CHANG <nils@nilsand.re> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200415140052.2lftkixe37llmtjl@nixos

Removing Avinash since tomorrow is his last day at Quantenna. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200416182803.31201-1-sergey.matyukevich.os@quantenna.com

As the recent regression showed, we want sometimes to turn off the audio component binding just for debugging. This patch adds the module option to control it easily without compilation. Fixes: ade49db ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207223 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200415162523.27499-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ Just like the other two netfs patches I sent yesterday, this one doesn't apply to v6.14 as it was obsoleted by commit e2d46f2 ("netfs: Change the read result collector to only use one work item"). ] When checking whether the edges of adjacent subrequests touch, the `prev` variable is deferenced, but it might not have been initialized. This causes crashes like this one: BUG: unable to handle page fault for address: 0000000181343843 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000001c66db0067 P4D 8000001c66db0067 PUD 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 1 UID: 33333 PID: 24424 Comm: php-cgi8.2 Kdump: loaded Not tainted 6.13.2-cm4all0-hp+ torvalds#427 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 11/23/2021 RIP: 0010:netfs_consume_read_data.isra.0+0x5ef/0xb00 Code: fe ff ff 48 8b 83 88 00 00 00 48 8b 4c 24 30 4c 8b 43 78 48 85 c0 48 8d 51 70 75 20 48 8b 73 30 48 39 d6 74 17 48 8b 7c 24 40 <48> 8b 4f 78 48 03 4f 68 48 39 4b 68 0f 84 ab 02 00 00 49 29 c0 48 RSP: 0000:ffffc90037adbd00 EFLAGS: 00010283 RAX: 0000000000000000 RBX: ffff88811bda0600 RCX: ffff888620e7b980 RDX: ffff888620e7b9f0 RSI: ffff88811bda0428 RDI: 00000001813437cb RBP: 0000000000000000 R08: 0000000000004000 R09: 0000000000000000 R10: ffffffff82e070c0 R11: 0000000007ffffff R12: 0000000000004000 R13: ffff888620e7bb68 R14: 0000000000008000 R15: ffff888620e7bb68 FS: 00007ff2e0e7ddc0(0000) GS:ffff88981f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000181343843 CR3: 0000001bc10ba006 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x15c/0x450 ? search_extable+0x22/0x30 ? netfs_consume_read_data.isra.0+0x5ef/0xb00 ? search_module_extables+0xe/0x40 ? exc_page_fault+0x5e/0x100 ? asm_exc_page_fault+0x22/0x30 ? netfs_consume_read_data.isra.0+0x5ef/0xb00 ? intel_iommu_unmap_pages+0xaa/0x190 ? __pfx_cachefiles_read_complete+0x10/0x10 netfs_read_subreq_terminated+0x24f/0x390 cachefiles_read_complete+0x48/0xf0 iomap_dio_bio_end_io+0x125/0x160 blk_update_request+0xea/0x3e0 scsi_end_request+0x27/0x190 scsi_io_completion+0x43/0x6c0 blk_complete_reqs+0x40/0x50 handle_softirqs+0xd1/0x280 irq_exit_rcu+0x91/0xb0 common_interrupt+0x3b/0xa0 asm_common_interrupt+0x22/0x40 RIP: 0033:0x55fe8470d2ab Code: 00 00 3c 7e 74 3b 3c b6 0f 84 dd 03 00 00 3c 1e 74 2f 83 c1 01 48 83 c2 38 48 83 c7 30 44 39 d1 74 3e 48 63 42 08 85 c0 79 a3 <49> 8b 46 48 8b 04 38 f6 c4 04 75 0b 0f b6 42 30 83 e0 0c 3c 04 75 RSP: 002b:00007ffca5ef2720 EFLAGS: 00000216 RAX: 0000000000000023 RBX: 0000000000000008 RCX: 000000000000001b RDX: 00007ff2e0cdb6f8 RSI: 0000000000000006 RDI: 0000000000000510 RBP: 00007ffca5ef27a0 R08: 00007ffca5ef2720 R09: 0000000000000001 R10: 000000000000001e R11: 00007ff2e0c10d08 R12: 0000000000000001 R13: 0000000000000120 R14: 00007ff2e0cb1ed0 R15: 00000000000000b0 </TASK> Fixes: ee4cdf7 ("netfs: Speed up buffered reading") Cc: stable@vger.kernel.org Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…faces Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d torvalds#14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface. Reported-and-tested-by: Robert Morris <rtm@csail.mit.edu> Cc: stable <stable@kernel.org> Closes: https://lore.kernel.org/linux-usb/95564.1737394039@localhost/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/c27f3bf4-63d8-4fb5-ac82-09e3cd19f61c@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Filesystems can write to disk from page reclaim with __GFP_FS set. Marc found a case where scsi_realloc_sdev_budget_map() ends up in page reclaim with GFP_KERNEL, where it could try to take filesystem locks again, leading to a deadlock. WARNING: possible circular locking dependency detected 6.13.0 #1 Not tainted ------------------------------------------------------ kswapd0/70 is trying to acquire lock: ffff8881025d5d78 (&q->q_usage_counter(io)){++++}-{0:0}, at: blk_mq_submit_bio+0x461/0x6e0 but task is already holding lock: ffffffff81ef5f40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x9f/0x760 The full lockdep splat can be found in Marc's report: https://lkml.org/lkml/2025/1/24/1101 Avoid the potential deadlock by doing the allocation with GFP_NOIO, which prevents both filesystem and block layer recursion. Reported-by: Marc Aurèle La France <tsi@tuyoix.net> Signed-off-by: Rik van Riel <riel@surriel.com> Link: https://lore.kernel.org/r/20250129104525.0ae8421e@fangorn Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Protected mode assumes that at minimum vgic-v3 is present, however KVM fails to actually enforce this at the time of initialization. As such, when running protected mode in a half-baked state on GICv2 hardware we see the hyp go belly up at vcpu_load() when it tries to restore the vgic-v3 cpuif: $ ./arch_timer_edge_cases [ 130.599140] kvm [4518]: nVHE hyp panic at: [<ffff800081102b58>] __kvm_nvhe___vgic_v3_restore_vmcr_aprs+0x8/0x84! [ 130.603685] kvm [4518]: Cannot dump pKVM nVHE stacktrace: !CONFIG_PROTECTED_NVHE_STACKTRACE [ 130.611962] kvm [4518]: Hyp Offset: 0xfffeca95ed000000 [ 130.617053] Kernel panic - not syncing: HYP panic: [ 130.617053] PS:800003c9 PC:0000b56a94102b58 ESR:0000000002000000 [ 130.617053] FAR:ffff00007b98d4d0 HPFAR:00000000007b98d0 PAR:0000000000000000 [ 130.617053] VCPU:0000000000000000 [ 130.638013] CPU: 0 UID: 0 PID: 4518 Comm: arch_timer_edge Tainted: G C 6.13.0-rc3-00009-gf7d03fcbf1f4 #1 [ 130.648790] Tainted: [C]=CRAP [ 130.651721] Hardware name: Libre Computer AML-S905X-CC (DT) [ 130.657242] Call trace: [ 130.659656] show_stack+0x18/0x24 (C) [ 130.663279] dump_stack_lvl+0x38/0x90 [ 130.666900] dump_stack+0x18/0x24 [ 130.670178] panic+0x388/0x3e8 [ 130.673196] nvhe_hyp_panic_handler+0x104/0x208 [ 130.677681] kvm_arch_vcpu_load+0x290/0x548 [ 130.681821] vcpu_load+0x50/0x80 [ 130.685013] kvm_arch_vcpu_ioctl_run+0x30/0x868 [ 130.689498] kvm_vcpu_ioctl+0x2e0/0x974 [ 130.693293] __arm64_sys_ioctl+0xb4/0xec [ 130.697174] invoke_syscall+0x48/0x110 [ 130.700883] el0_svc_common.constprop.0+0x40/0xe0 [ 130.705540] do_el0_svc+0x1c/0x28 [ 130.708818] el0_svc+0x30/0xd0 [ 130.711837] el0t_64_sync_handler+0x10c/0x138 [ 130.716149] el0t_64_sync+0x198/0x19c [ 130.719774] SMP: stopping secondary CPUs [ 130.723660] Kernel Offset: disabled [ 130.727103] CPU features: 0x000,00000800,02800000,0200421b [ 130.732537] Memory Limit: none [ 130.735561] ---[ end Kernel panic - not syncing: HYP panic: [ 130.735561] PS:800003c9 PC:0000b56a94102b58 ESR:0000000002000000 [ 130.735561] FAR:ffff00007b98d4d0 HPFAR:00000000007b98d0 PAR:0000000000000000 [ 130.735561] VCPU:0000000000000000 ]--- Fix it by failing KVM initialization if the system doesn't implement vgic-v3, as protected mode will never do anything useful on such hardware. Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/kvmarm/5ca7588c-7bf2-4352-8661-e4a56a9cd9aa@sirena.org.uk/ Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250203231543.233511-1-oliver.upton@linux.dev Signed-off-by: Marc Zyngier <maz@kernel.org>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.14, take #1 - Correctly clean the BSS to the PoC before allowing EL2 to access it on nVHE/hVHE/protected configurations - Propagate ownership of debug registers in protected mode after the rework that landed in 6.14-rc1 - Stop pretending that we can run the protected mode without a GICv3 being present on the host - Fix a use-after-free situation that can occur if a vcpu fails to initialise the NV shadow S2 MMU contexts - Always evaluate the need to arm a background timer for fully emulated guest timers - Fix the emulation of EL1 timers in the absence of FEAT_ECV - Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0

commit c8347f9 ("gpu: host1x: Fix boot regression for Tegra") caused a use of uninitialized mutex leading to below warning when CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled. [ 41.662843] ------------[ cut here ]------------ [ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878 [ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod [ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1 [ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024 [ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 41.679636] pc : __mutex_lock+0x670/0x878 [ 41.683834] lr : __mutex_lock+0x670/0x878 [ 41.688035] sp : ffff800084b77090 [ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000 [ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000 [ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0 [ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000 [ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3 [ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc [ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001 [ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000 [ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000 [ 41.764251] Call trace: [ 41.766695] __mutex_lock+0x670/0x878 [ 41.770373] mutex_lock_nested+0x2c/0x40 [ 41.774134] host1x_intr_start+0x54/0xf8 [host1x] [ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x] [ 41.783935] pm_generic_runtime_resume+0x84/0xc8 [ 41.788485] __rpm_callback+0xa0/0x478 [ 41.792422] rpm_callback+0x15c/0x1a8 [ 41.795922] rpm_resume+0x698/0xc08 [ 41.799597] __pm_runtime_resume+0xa8/0x140 [ 41.803621] host1x_probe+0x810/0xbc0 [host1x] [ 41.807909] platform_probe+0xcc/0x1a8 [ 41.811845] really_probe+0x188/0x800 [ 41.815347] __driver_probe_device+0x164/0x360 [ 41.819810] driver_probe_device+0x64/0x1a8 [ 41.823834] __driver_attach+0x180/0x490 [ 41.827773] bus_for_each_dev+0x104/0x1a0 [ 41.831797] driver_attach+0x44/0x68 [ 41.835296] bus_add_driver+0x23c/0x4e8 [ 41.839235] driver_register+0x15c/0x3a8 [ 41.843170] __platform_register_drivers+0xa4/0x208 [ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x] [ 41.853147] do_one_initcall+0xd4/0x380 [ 41.856997] do_init_module+0x1dc/0x698 [ 41.860758] load_module+0xc70/0x1300 [ 41.864435] __do_sys_init_module+0x1a8/0x1d0 [ 41.868721] __arm64_sys_init_module+0x74/0xb0 [ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8 [ 41.877997] do_el0_svc+0x154/0x1d0 [ 41.881671] el0_svc+0x54/0x140 [ 41.884820] el0t_64_sync_handler+0x120/0x130 [ 41.889285] el0t_64_sync+0x1a4/0x1a8 [ 41.892960] irq event stamp: 69737 [ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8 [ 41.905739] hardirqs last disabled at (69736): [<ffffdd4be59dcd40>] clk_enable_lock+0x98/0x198 [ 41.914314] softirqs last enabled at (68082): [<ffffdd4be466b1d0>] handle_softirqs+0x4c8/0x890 [ 41.922977] softirqs last disabled at (67945): [<ffffdd4be44f02a4>] __do_softirq+0x1c/0x28 [ 41.931289] ---[ end trace 0000000000000000 ]--- Inside the probe function when pm_runtime_enable() is called, the PM core invokes a resume callback if the device Host1x is in a suspended state. As it can be seen in the logs above, this leads to host1x_intr_start() function call which is trying to acquire a mutex lock. But, the function host_intr_init() only gets called after the pm_runtime_enable() where mutex is initialised leading to the use of mutex prior to its initialisation. Fix this by moving the mutex initialisation prior to the runtime PM enablement function pm_runtime_enable() in probe. Fixes: c8347f9 ("gpu: host1x: Fix boot regression for Tegra") Signed-off-by: Rupinderjit Singh <rusingh@redhat.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.ozlabs.org/project/linux-tegra/patch/20250206155803.201942-1-rusingh@redhat.com/

vxlan_init() must check vxlan_vnigroup_init() success otherwise a crash happens later, spotted by syzbot. Oops: general protection fault, probably for non-canonical address 0xdffffc000000002c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000160-0x0000000000000167] CPU: 0 UID: 0 PID: 7313 Comm: syz-executor147 Not tainted 6.14.0-rc1-syzkaller-00276-g69b54314c975 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:vxlan_vnigroup_uninit+0x89/0x500 drivers/net/vxlan/vxlan_vnifilter.c:912 Code: 00 48 8b 44 24 08 4c 8b b0 98 41 00 00 49 8d 86 60 01 00 00 48 89 c2 48 89 44 24 10 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4d 04 00 00 49 8b 86 60 01 00 00 48 ba 00 00 00 RSP: 0018:ffffc9000cc1eea8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000001 RCX: ffffffff8672effb RDX: 000000000000002c RSI: ffffffff8672ecb9 RDI: ffff8880461b4f18 RBP: ffff8880461b4ef4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000020000 R13: ffff8880461b0d80 R14: 0000000000000000 R15: dffffc0000000000 FS: 00007fecfa95d6c0(0000) GS:ffff88806a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fecfa95cfb8 CR3: 000000004472c000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vxlan_uninit+0x1ab/0x200 drivers/net/vxlan/vxlan_core.c:2942 unregister_netdevice_many_notify+0x12d6/0x1f30 net/core/dev.c:11824 unregister_netdevice_many net/core/dev.c:11866 [inline] unregister_netdevice_queue+0x307/0x3f0 net/core/dev.c:11736 register_netdevice+0x1829/0x1eb0 net/core/dev.c:10901 __vxlan_dev_create+0x7c6/0xa30 drivers/net/vxlan/vxlan_core.c:3981 vxlan_newlink+0xd1/0x130 drivers/net/vxlan/vxlan_core.c:4407 rtnl_newlink_create net/core/rtnetlink.c:3795 [inline] __rtnl_newlink net/core/rtnetlink.c:3906 [inline] Fixes: f9c4bb0 ("vxlan: vni filtering support on collect metadata device") Reported-by: syzbot+6a9624592218c2c5e7aa@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67a9d9b4.050a0220.110943.002d.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250210105242.883482-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bch2_nocow_write_convert_unwritten is already in transaction context: 00191 ========= TEST generic/648 00242 kernel BUG at fs/bcachefs/btree_iter.c:3332! 00242 Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP 00242 Modules linked in: 00242 CPU: 4 UID: 0 PID: 2593 Comm: fsstress Not tainted 6.13.0-rc3-ktest-g345af8f855b7 #14403 00242 Hardware name: linux,dummy-virt (DT) 00242 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 00242 pc : __bch2_trans_get+0x120/0x410 00242 lr : __bch2_trans_get+0xcc/0x410 00242 sp : ffffff80d89af600 00242 x29: ffffff80d89af600 x28: ffffff80ddb23000 x27: 00000000fffff705 00242 x26: ffffff80ddb23028 x25: ffffff80d8903fe0 x24: ffffff80ebb30168 00242 x23: ffffff80c8aeb500 x22: 000000000000005d x21: ffffff80d8904078 00242 x20: ffffff80d8900000 x19: ffffff80da9e8000 x18: 0000000000000000 00242 x17: 64747568735f6c61 x16: 6e72756f6a20726f x15: 0000000000000028 00242 x14: 0000000000000004 x13: 000000000000f787 x12: ffffffc081bbcdc8 00242 x11: 0000000000000000 x10: 0000000000000003 x9 : ffffffc08094efbc 00242 x8 : 000000001092c111 x7 : 000000000000000c x6 : ffffffc083c31fc4 00242 x5 : ffffffc083c31f28 x4 : ffffff80c8aeb500 x3 : ffffff80ebb30000 00242 x2 : 0000000000000001 x1 : 0000000000000a21 x0 : 000000000000028e 00242 Call trace: 00242 __bch2_trans_get+0x120/0x410 (P) 00242 bch2_inum_offset_err_msg+0x48/0xb0 00242 bch2_nocow_write_convert_unwritten+0x3d0/0x530 00242 bch2_nocow_write+0xeb0/0x1000 00242 __bch2_write+0x330/0x4e8 00242 bch2_write+0x1f0/0x530 00242 bch2_direct_write+0x530/0xc00 00242 bch2_write_iter+0x160/0xbe0 00242 vfs_write+0x1cc/0x360 00242 ksys_write+0x5c/0xf0 00242 __arm64_sys_write+0x20/0x30 00242 invoke_syscall.constprop.0+0x54/0xe8 00242 do_el0_svc+0x44/0xc0 00242 el0_svc+0x34/0xa0 00242 el0t_64_sync_handler+0x104/0x130 00242 el0t_64_sync+0x154/0x158 00242 Code: 6b01001f 54ffff01 79408460 3617fec0 (d4210000) 00242 ---[ end trace 0000000000000000 ]--- 00242 Kernel panic - not syncing: Oops - BUG: Fatal exception Signed-off-by: Alan Huang <mmpgouride@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We have several places across the kernel where we want to access another task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making a call to syscall_get_arguments(). This works for register arguments right away by accessing the task's `regs' member of `struct pt_regs', however for stack arguments seen with 32-bit/o32 kernels things are more complicated. Technically they ought to be obtained from the user stack with calls to an access_remote_vm(), but we have an easier way available already. So as to be able to access syscall stack arguments as regular function arguments following the MIPS calling convention we copy them over from the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in handle_sys(), to the current stack frame's outgoing argument space at the top of the stack, which is where the handler called expects to see its incoming arguments. This area is also pointed at by the `pt_regs' pointer obtained by task_pt_regs(). Make the o32 stack argument space a proper member of `struct pt_regs' then, by renaming the existing member from `pad0' to `args' and using generated offsets to access the space. No functional change though. With the change in place the o32 kernel stack frame layout at the entry to a syscall handler invoked by handle_sys() is therefore as follows: $sp + 68 -> | ... | <- pt_regs.regs[9] +---------------------+ $sp + 64 -> | $t0 | <- pt_regs.regs[8] +---------------------+ $sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7] +---------------------+ $sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6] +---------------------+ $sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5] +---------------------+ $sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4] +---------------------+ $sp + 44 -> | $v1 | <- pt_regs.regs[3] +---------------------+ $sp + 40 -> | $v0 | <- pt_regs.regs[2] +---------------------+ $sp + 36 -> | $at | <- pt_regs.regs[1] +---------------------+ $sp + 32 -> | $zero | <- pt_regs.regs[0] +---------------------+ $sp + 28 -> | stack argument #8 | <- pt_regs.args[7] +---------------------+ $sp + 24 -> | stack argument #7 | <- pt_regs.args[6] +---------------------+ $sp + 20 -> | stack argument #6 | <- pt_regs.args[5] +---------------------+ $sp + 16 -> | stack argument #5 | <- pt_regs.args[4] +---------------------+ $sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3] +---------------------+ $sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2] +---------------------+ $sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1] +---------------------+ $sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0] +---------------------+ holding user data received and with the first 4 frame slots reserved by the psABI for the compiler to spill the incoming arguments from $a0-$a3 registers (which it sometimes does according to its needs) and the next 4 frame slots designated by the psABI for any stack function arguments that follow. This data is also available for other tasks to peek/poke at as reqired and where permitted. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This makes ptrace/get_syscall_info selftest pass on mips o32 and mips64 o32 by fixing the following two test assertions: 1. get_syscall_info test assertion on mips o32: # get_syscall_info.c:218:get_syscall_info:Expected exp_args[5] (3134521044) == info.entry.args[4] (4911432) # get_syscall_info.c:219:get_syscall_info:wait #1: entry stop mismatch 2. get_syscall_info test assertion on mips64 o32: # get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753) # get_syscall_info.c:210:get_syscall_info:wait #1: entry stop mismatch The first assertion happens due to mips_get_syscall_arg() trying to access another task's context but failing to do it properly because get_user() it calls just peeks at the current task's context. It usually does not crash because the default user stack always gets assigned the same VMA, but it is pure luck which mips_get_syscall_arg() wouldn't have if e.g. the stack was switched (via setcontext(3) or however) or a non-default process's thread peeked at, and in any case irrelevant data is obtained just as observed with the test case. mips_get_syscall_arg() ought to be using access_remote_vm() instead to retrieve the other task's stack contents, but given that the data has been already obtained and saved in `struct pt_regs' it would be an overkill. The first assertion is fixed for mips o32 by using struct pt_regs.args instead of get_user() to obtain syscall arguments. This approach works due to this piece in arch/mips/kernel/scall32-o32.S: /* * Ok, copy the args from the luser stack to the kernel stack. */ .set push .set noreorder .set nomacro load_a4: user_lw(t5, 16(t0)) # argument #5 from usp load_a5: user_lw(t6, 20(t0)) # argument #6 from usp load_a6: user_lw(t7, 24(t0)) # argument #7 from usp load_a7: user_lw(t8, 28(t0)) # argument #8 from usp loads_done: sw t5, PT_ARG4(sp) # argument #5 to ksp sw t6, PT_ARG5(sp) # argument #6 to ksp sw t7, PT_ARG6(sp) # argument #7 to ksp sw t8, PT_ARG7(sp) # argument #8 to ksp .set pop .section __ex_table,"a" PTR_WD load_a4, bad_stack_a4 PTR_WD load_a5, bad_stack_a5 PTR_WD load_a6, bad_stack_a6 PTR_WD load_a7, bad_stack_a7 .previous arch/mips/kernel/scall64-o32.S has analogous code for mips64 o32 that allows fixing the issue by obtaining syscall arguments from struct pt_regs.regs[4..11] instead of the erroneous use of get_user(). The second assertion is fixed by truncating 64-bit values to 32-bit syscall arguments. Fixes: c0ff3c5 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.") Signed-off-by: Dmitry V. Levin <ldv@strace.io> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This fixes the following trace by reworking the locking of l2cap_conn so instead of only locking when changing the chan_l list this promotes chan_lock to a general lock of l2cap_conn so whenever it is being held it would prevents the likes of l2cap_conn_del to run: list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:61! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_rcu include/linux/rculist.h:168 [inline] hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858 l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830 l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377 l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416 __sock_release net/socket.c:642 [inline] sock_close+0xbc/0x240 net/socket.c:1393 __fput+0x3e9/0x9f0 fs/file_table.c:448 task_work_run+0x24f/0x310 kernel/task_work.c:227 ptrace_notify+0x2d2/0x380 kernel/signal.c:2522 ptrace_report_syscall include/linux/ptrace.h:415 [inline] ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline] syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline] syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7aceeaf449 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449 RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004 RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59 Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0 R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122 R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00 FS: 00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com Fixes: b4f82f9 ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>

The behaviour of kthread_create_worker() was recently changed to align with the one of kthread_create(). The kthread worker is created but not awaken by default. This is to allow the use of kthread_affine_preferred() and kthread_bind[_mask]() with kthread workers. In order to keep the old behaviour and wake the kthread up, kthread_run_worker() must be used. All the pre-existing users have been converted, except for UVC that was introduced in the same merge window as the API change. This results in hangs: INFO: task UVCG:82 blocked for more than 491 seconds. Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1 task:UVCG state:D stack:0 pid:82 Call Trace: __schedule schedule schedule_preempt_disabled kthread ? kthread_flush_work ret_from_fork ret_from_fork_asm entry_INT80_32 Fix this with converting UVCG kworker to the new API. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com Fixes: f0bbfbd ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue") Cc: stable <stable@kernel.org> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When trying to mmap a trace instance buffer that is attached to reserve_mem, it would crash: BUG: unable to handle page fault for address: ffffe97bd00025c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 2862f3067 P4D 2862f3067 PUD 0 Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty torvalds#233 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:validate_page_before_insert+0x5/0xb0 Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89 RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246 RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29 RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08 RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000 R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000 FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0 Call Trace: <TASK> ? __die_body.cold+0x19/0x1f ? __die+0x2e/0x40 ? page_fault_oops+0x157/0x2b0 ? search_module_extables+0x53/0x80 ? validate_page_before_insert+0x5/0xb0 ? kernelmode_fixup_or_oops.isra.0+0x5f/0x70 ? __bad_area_nosemaphore+0x16e/0x1b0 ? bad_area_nosemaphore+0x16/0x20 ? do_kern_addr_fault+0x77/0x90 ? exc_page_fault+0x22b/0x230 ? asm_exc_page_fault+0x2b/0x30 ? validate_page_before_insert+0x5/0xb0 ? vm_insert_pages+0x151/0x400 __rb_map_vma+0x21f/0x3f0 ring_buffer_map+0x21b/0x2f0 tracing_buffers_mmap+0x70/0xd0 __mmap_region+0x6f0/0xbd0 mmap_region+0x7f/0x130 do_mmap+0x475/0x610 vm_mmap_pgoff+0xf2/0x1d0 ksys_mmap_pgoff+0x166/0x200 __x64_sys_mmap+0x37/0x50 x64_sys_call+0x1670/0x1d70 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The reason was that the code that maps the ring buffer pages to user space has: page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]); And uses that in: vm_insert_pages(vma, vma->vm_start, pages, &nr_pages); But virt_to_page() does not work with vmap()'d memory which is what the persistent ring buffer has. It is rather trivial to allow this, but for now just disable mmap() of instances that have their ring buffer from the reserve_mem option. If an mmap() is performed on a persistent buffer it will return -ENODEV just like it would if the .mmap field wasn't defined in the file_operations structure. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home Fixes: 9b7bdf6 ("tracing: Have trace_printk not use binary prints if boot buffer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Since commit 6037802 ("power: supply: core: implement extension API") there is the following ABBA deadlock (simplified) between the LED trigger code and the power-supply code: 1) When registering a power-supply class device, power_supply_register() calls led_trigger_register() from power_supply_create_triggers() in a scoped_guard(rwsem_read, &psy->extensions_sem) context. led_trigger_register() then in turn takes a LED subsystem lock. So here we have the following locking order: * Read-lock extensions_sem * Lock LED subsystem lock(s) 2) When registering a LED class device, with its default trigger set to a power-supply LED trigger (which has already been registered) The LED class code calls power_supply_led_trigger_activate() when setting up the default trigger. power_supply_led_trigger_activate() calls power_supply_get_property() to determine the initial value of to assign to the LED and that read-locks extensions_sem. So now we have the following locking order: * Lock LED subsystem lock(s) * Read-lock extensions_sem Fixing this is easy, there is no need to hold the extensions_sem when calling power_supply_create_triggers() since all triggers are always created rather then checking for the presence of certain attributes as power_supply_add_hwmon_sysfs() does. Move power_supply_create_triggers() out of the guard block to fix this. Here is the lockdep report fixed by this change: [ 31.249343] ====================================================== [ 31.249378] WARNING: possible circular locking dependency detected [ 31.249413] 6.13.0-rc6+ torvalds#251 Tainted: G C E [ 31.249440] ------------------------------------------------------ [ 31.249471] (udev-worker)/553 is trying to acquire lock: [ 31.249501] ffff892adbcaf660 (&psy->extensions_sem){.+.+}-{4:4}, at: power_supply_get_property.part.0+0x22/0x150 [ 31.249574] but task is already holding lock: [ 31.249603] ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 [ 31.249657] which lock already depends on the new lock. [ 31.249696] the existing dependency chain (in reverse order) is: [ 31.249735] -> #2 (&led_cdev->trigger_lock){+.+.}-{4:4}: [ 31.249778] down_write+0x3b/0xd0 [ 31.249803] led_trigger_set_default+0x34/0xe0 [ 31.249833] led_classdev_register_ext+0x311/0x3a0 [ 31.249863] input_leds_connect+0x1dc/0x2a0 [ 31.249889] input_attach_handler.isra.0+0x75/0x90 [ 31.249921] input_register_device.cold+0xa1/0x150 [ 31.249955] hidinput_connect+0x8a2/0xb80 [ 31.249982] hid_connect+0x582/0x5c0 [ 31.250007] hid_hw_start+0x3f/0x60 [ 31.250030] hid_device_probe+0x122/0x1f0 [ 31.250053] really_probe+0xde/0x340 [ 31.250080] __driver_probe_device+0x78/0x110 [ 31.250105] driver_probe_device+0x1f/0xa0 [ 31.250132] __device_attach_driver+0x85/0x110 [ 31.250160] bus_for_each_drv+0x78/0xc0 [ 31.250184] __device_attach+0xb0/0x1b0 [ 31.250207] bus_probe_device+0x94/0xb0 [ 31.250230] device_add+0x64a/0x860 [ 31.250252] hid_add_device+0xe5/0x240 [ 31.250279] usbhid_probe+0x4dc/0x620 [ 31.250303] usb_probe_interface+0xe4/0x2a0 [ 31.250329] really_probe+0xde/0x340 [ 31.250353] __driver_probe_device+0x78/0x110 [ 31.250377] driver_probe_device+0x1f/0xa0 [ 31.250404] __device_attach_driver+0x85/0x110 [ 31.250431] bus_for_each_drv+0x78/0xc0 [ 31.250455] __device_attach+0xb0/0x1b0 [ 31.250478] bus_probe_device+0x94/0xb0 [ 31.250501] device_add+0x64a/0x860 [ 31.250523] usb_set_configuration+0x606/0x8a0 [ 31.250552] usb_generic_driver_probe+0x3e/0x60 [ 31.250579] usb_probe_device+0x3d/0x120 [ 31.250605] really_probe+0xde/0x340 [ 31.250629] __driver_probe_device+0x78/0x110 [ 31.250653] driver_probe_device+0x1f/0xa0 [ 31.250680] __device_attach_driver+0x85/0x110 [ 31.250707] bus_for_each_drv+0x78/0xc0 [ 31.250731] __device_attach+0xb0/0x1b0 [ 31.250753] bus_probe_device+0x94/0xb0 [ 31.250776] device_add+0x64a/0x860 [ 31.250798] usb_new_device.cold+0x141/0x38f [ 31.250828] hub_event+0x1166/0x1980 [ 31.250854] process_one_work+0x20f/0x580 [ 31.250879] worker_thread+0x1d1/0x3b0 [ 31.250904] kthread+0xee/0x120 [ 31.250926] ret_from_fork+0x30/0x50 [ 31.250954] ret_from_fork_asm+0x1a/0x30 [ 31.250982] -> #1 (triggers_list_lock){++++}-{4:4}: [ 31.251022] down_write+0x3b/0xd0 [ 31.251045] led_trigger_register+0x40/0x1b0 [ 31.251074] power_supply_register_led_trigger+0x88/0x150 [ 31.251107] power_supply_create_triggers+0x55/0xe0 [ 31.251135] __power_supply_register.part.0+0x34e/0x4a0 [ 31.251164] devm_power_supply_register+0x70/0xc0 [ 31.251190] bq27xxx_battery_setup+0x1a1/0x6d0 [bq27xxx_battery] [ 31.251235] bq27xxx_battery_i2c_probe+0xe5/0x17f [bq27xxx_battery_i2c] [ 31.251272] i2c_device_probe+0x125/0x2b0 [ 31.251299] really_probe+0xde/0x340 [ 31.251324] __driver_probe_device+0x78/0x110 [ 31.251348] driver_probe_device+0x1f/0xa0 [ 31.251375] __driver_attach+0xba/0x1c0 [ 31.251398] bus_for_each_dev+0x6b/0xb0 [ 31.251421] bus_add_driver+0x111/0x1f0 [ 31.251445] driver_register+0x6e/0xc0 [ 31.251470] i2c_register_driver+0x41/0xb0 [ 31.251498] do_one_initcall+0x5e/0x3a0 [ 31.251522] do_init_module+0x60/0x220 [ 31.251550] __do_sys_init_module+0x15f/0x190 [ 31.251575] do_syscall_64+0x93/0x180 [ 31.251598] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.251629] -> #0 (&psy->extensions_sem){.+.+}-{4:4}: [ 31.251668] __lock_acquire+0x13ce/0x21c0 [ 31.251694] lock_acquire+0xcf/0x2e0 [ 31.251719] down_read+0x3e/0x170 [ 31.251741] power_supply_get_property.part.0+0x22/0x150 [ 31.251774] power_supply_update_leds+0x8d/0x230 [ 31.251804] power_supply_led_trigger_activate+0x18/0x20 [ 31.251837] led_trigger_set+0x1fc/0x300 [ 31.251863] led_trigger_set_default+0x90/0xe0 [ 31.251892] led_classdev_register_ext+0x311/0x3a0 [ 31.251921] devm_led_classdev_multicolor_register_ext+0x6e/0xb80 [led_class_multicolor] [ 31.251969] ktd202x_probe+0x464/0x5c0 [leds_ktd202x] [ 31.252002] i2c_device_probe+0x125/0x2b0 [ 31.252027] really_probe+0xde/0x340 [ 31.252052] __driver_probe_device+0x78/0x110 [ 31.252076] driver_probe_device+0x1f/0xa0 [ 31.252103] __driver_attach+0xba/0x1c0 [ 31.252125] bus_for_each_dev+0x6b/0xb0 [ 31.252148] bus_add_driver+0x111/0x1f0 [ 31.252172] driver_register+0x6e/0xc0 [ 31.252197] i2c_register_driver+0x41/0xb0 [ 31.252225] do_one_initcall+0x5e/0x3a0 [ 31.252248] do_init_module+0x60/0x220 [ 31.252274] __do_sys_init_module+0x15f/0x190 [ 31.253986] do_syscall_64+0x93/0x180 [ 31.255826] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.257614] other info that might help us debug this: [ 31.257619] Chain exists of: &psy->extensions_sem --> triggers_list_lock --> &led_cdev->trigger_lock [ 31.257630] Possible unsafe locking scenario: [ 31.257632] CPU0 CPU1 [ 31.257633] ---- ---- [ 31.257634] lock(&led_cdev->trigger_lock); [ 31.257637] lock(triggers_list_lock); [ 31.257640] lock(&led_cdev->trigger_lock); [ 31.257643] rlock(&psy->extensions_sem); [ 31.257646] *** DEADLOCK *** [ 31.289433] 4 locks held by (udev-worker)/553: [ 31.289443] #0: ffff892ad9658108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xaf/0x1c0 [ 31.289463] #1: ffff892adbc0bbc8 (&led_cdev->led_access){+.+.}-{4:4}, at: led_classdev_register_ext+0x1c7/0x3a0 [ 31.289476] #2: ffffffffad0e30b0 (triggers_list_lock){++++}-{4:4}, at: led_trigger_set_default+0x2c/0xe0 [ 31.289487] #3: ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 Fixes: 6037802 ("power: supply: core: implement extension API") Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250130140035.20636-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower] Fixes: 80cd22c ("net/sched: cls_api: Support hardware miss to tc action") Signed-off-by: Pierre Riteau <pierre@stackhpc.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250213223610.320278-1-pierre@stackhpc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline] _raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159 reset_per_cpu_data+0xe6/0x240 [drop_monitor] net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497 genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x157/0x190 net/socket.c:663 ____sys_sendmsg+0x712/0x870 net/socket.c:2378 ___sys_sendmsg+0xf8/0x170 net/socket.c:2432 __sys_sendmsg+0xea/0x1b0 net/socket.c:2461 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x62/0xc7 RIP: 0033:0x7f3f9815aee9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9 RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007 RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768 If drop_monitor is built as a kernel module, syzkaller may have time to send a netlink NET_DM_CMD_START message during the module loading. This will call the net_dm_monitor_start() function that uses a spinlock that has not yet been initialized. To fix this, let's place resource initialization above the registration of a generic netlink family. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9a8afc8 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Cc: stable@vger.kernel.org Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250213152054.2785669-1-Ilia.Gavrilov@infotecs.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A softlockup issue was found with stress test: watchdog: BUG: soft lockup - CPU#27 stuck for 26s! [migration/27:181] CPU: 27 UID: 0 PID: 181 Comm: migration/27 6.14.0-rc2-next-20250210 #1 Stopper: multi_cpu_stop <- stop_machine_from_inactive_cpu RIP: 0010:stop_machine_yield+0x2/0x10 RSP: 0000:ff4a0dcecd19be48 EFLAGS: 00000246 RAX: ffffffff89c0108f RBX: ff4a0dcec03afe44 RCX: 0000000000000000 RDX: ff1cdaaf6eba5808 RSI: 0000000000000282 RDI: ff1cda80c1775a40 RBP: 0000000000000001 R08: 00000011620096c6 R09: 7fffffffffffffff R10: 0000000000000001 R11: 0000000000000100 R12: ff1cda80c1775a40 R13: 0000000000000000 R14: 0000000000000001 R15: ff4a0dcec03afe20 FS: 0000000000000000(0000) GS:ff1cdaaf6eb80000(0000) CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000025e2c2a001 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: multi_cpu_stop+0x8f/0x100 cpu_stopper_thread+0x90/0x140 smpboot_thread_fn+0xad/0x150 kthread+0xc2/0x100 ret_from_fork+0x2d/0x50 The stress test involves CPU hotplug operations and memory control group (memcg) operations. The scenario can be described as follows: echo xx > memory.max cache_ap_online oom_reaper (CPU23) (CPU50) xx < usage stop_machine_from_inactive_cpu for(;;) // all active cpus trigger OOM queue_stop_cpus_work // waiting oom_reaper multi_cpu_stop(migration/xx) // sync all active cpus ack // waiting cpu23 ack // CPU50 loops in multi_cpu_stop waiting cpu50 Detailed explanation: 1. When the usage is larger than xx, an OOM may be triggered. If the process does not handle with ths kill signal immediately, it will loop in the memory_max_write. 2. When cache_ap_online is triggered, the multi_cpu_stop is queued to the active cpus. Within the multi_cpu_stop function, it attempts to synchronize the CPU states. However, the CPU23 didn't acknowledge because it is stuck in a loop within the for(;;). 3. The oom_reaper process is blocked because CPU50 is in a loop, waiting for CPU23 to acknowledge the synchronization request. 4. Finally, it formed cyclic dependency and lead to softlockup and dead loop. To fix this issue, add cond_resched() in the memory_max_write, so that it will not block migration task. Link: https://lkml.kernel.org/r/20250211081819.33307-1-chenridong@huaweicloud.com Fixes: b6e6edc ("mm: memcontrol: reclaim and OOM kill when shrinking memory.max below usage") Signed-off-by: Chen Ridong <chenridong@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Wang Weiyang <wangweiyang2@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The namespace percpu counter protects pending I/O, and we can only safely diable the namespace once the counter drop to zero. Otherwise we end up with a crash when running blktests/nvme/058 (eg for loop transport): [ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI [ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 torvalds#232 [ 2352.930438] [ T53909] Tainted: [W]=WARN [ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] [ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180 as the queue is already torn down when calling submit_bio(); So we need to init the percpu counter in nvmet_ns_enable(), and wait for it to drop to zero in nvmet_ns_disable() to avoid having I/O pending after the namespace has been disabled. Fixes: 74d1696 ("nvmet-loop: avoid using mutex in IO hotpath") Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org>

The delayed work item function nvmet_pci_epf_poll_sqs_work() polls all submission queues and keeps running in a loop as long as commands are being submitted by the host. Depending on the preemption configuration of the kernel, under heavy command workload, this function can thus run for more than RCU_CPU_STALL_TIMEOUT seconds, leading to a RCU stall: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 5-....: (20998 ticks this GP) idle=4244/1/0x4000000000000000 softirq=301/301 fqs=5132 rcu: (t=21000 jiffies g=-443 q=12 ncpus=8) CPU: 5 UID: 0 PID: 82 Comm: kworker/5:1 Not tainted 6.14.0-rc2 #1 Hardware name: Radxa ROCK 5B (DT) Workqueue: events nvmet_pci_epf_poll_sqs_work [nvmet_pci_epf] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dw_edma_device_tx_status+0xb8/0x130 lr : dw_edma_device_tx_status+0x9c/0x130 sp : ffff800080b5bbb0 x29: ffff800080b5bbb0 x28: ffff0331c5c78400 x27: ffff0331c1cd1960 x26: ffff0331c0e39010 x25: ffff0331c20e4000 x24: ffff0331c20e4a90 x23: 0000000000000000 x22: 0000000000000001 x21: 00000000005aca33 x20: ffff800080b5bc30 x19: ffff0331c123e370 x18: 000000000ab29e62 x17: ffffb2a878c9c118 x16: ffff0335bde82040 x15: 0000000000000000 x14: 000000000000017b x13: 00000000ee601780 x12: 0000000000000018 x11: 0000000000000000 x10: 0000000000000001 x9 : 0000000000000040 x8 : 00000000ee601780 x7 : 0000000105c785c0 x6 : ffff0331c1027d80 x5 : 0000000001ee7ad6 x4 : ffff0335bdea16c0 x3 : ffff0331c123e438 x2 : 00000000005aca33 x1 : 0000000000000000 x0 : ffff0331c123e410 Call trace: dw_edma_device_tx_status+0xb8/0x130 (P) dma_sync_wait+0x60/0xbc nvmet_pci_epf_dma_transfer+0x128/0x264 [nvmet_pci_epf] nvmet_pci_epf_poll_sqs_work+0x2a0/0x2e0 [nvmet_pci_epf] process_one_work+0x144/0x390 worker_thread+0x27c/0x458 kthread+0xe8/0x19c ret_from_fork+0x10/0x20 The solution for this is simply to explicitly allow rescheduling using cond_resched(). However, since doing so for every loop of nvmet_pci_epf_poll_sqs_work() significantly degrades performance (for 4K random reads using 4 I/O queues, the maximum IOPS goes down from 137 KIOPS to 110 KIOPS), call cond_resched() every second to avoid the RCU stalls. Fixes: 0faa0fe ("nvmet: New NVMe PCI endpoint function target driver") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>

Brad Spengler reported the list_del() corruption splat in gtp_net_exit_batch_rtnl(). [0] Commit eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl() to destroy devices in each netns as done in geneve and ip tunnels. However, this could trigger ->dellink() twice for the same device during ->exit_batch_rtnl(). Say we have two netns A & B and gtp device B that resides in netns B but whose UDP socket is in netns A. 1. cleanup_net() processes netns A and then B. 2. gtp_net_exit_batch_rtnl() finds the device B while iterating netns A's gn->gtp_dev_list and calls ->dellink(). [ device B is not yet unlinked from netns B as unregister_netdevice_many() has not been called. ] 3. gtp_net_exit_batch_rtnl() finds the device B while iterating netns B's for_each_netdev() and calls ->dellink(). gtp_dellink() cleans up the device's hash table, unlinks the dev from gn->gtp_dev_list, and calls unregister_netdevice_queue(). Basically, calling gtp_dellink() multiple times is fine unless CONFIG_DEBUG_LIST is enabled. Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and delegate the destruction to default_device_exit_batch() as done in bareudp. [0]: list_del corruption, ffff8880aaa62c00->next (autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]) is LIST_POISON1 (ffffffffffffff02) (prev is 0xffffffffffffff04) kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 UID: 0 PID: 1804 Comm: kworker/u8:7 Tainted: G T 6.12.13-grsec-full-20250211091339 #1 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:[<ffffffff84947381>] __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 Code: c2 76 91 31 c0 e8 9f b1 f7 fc 0f 0b 4d 89 f0 48 c7 c1 02 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 e0 c2 76 91 31 c0 e8 7f b1 f7 fc <0f> 0b 4d 89 e8 48 c7 c1 04 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 60 RSP: 0018:fffffe8040b4fbd0 EFLAGS: 00010283 RAX: 00000000000000cc RBX: dffffc0000000000 RCX: ffffffff818c4054 RDX: ffffffff84947381 RSI: ffffffff818d1512 RDI: 0000000000000000 RBP: ffff8880aaa62c00 R08: 0000000000000001 R09: fffffbd008169f32 R10: fffffe8040b4f997 R11: 0000000000000001 R12: a1988d84f24943e4 R13: ffffffffffffff02 R14: ffffffffffffff04 R15: ffff8880aaa62c08 RBX: kasan shadow of 0x0 RCX: __wake_up_klogd.part.0+0x74/0xe0 kernel/printk/printk.c:4554 RDX: __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 RSI: vprintk+0x72/0x100 kernel/printk/printk_safe.c:71 RBP: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object] RSP: process kstack fffffe8040b4fbd0+0x7bd0/0x8000 [kworker/u8:7+netns 1804 ] R09: kasan shadow of process kstack fffffe8040b4f990+0x7990/0x8000 [kworker/u8:7+netns 1804 ] R10: process kstack fffffe8040b4f997+0x7997/0x8000 [kworker/u8:7+netns 1804 ] R15: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc08/0x1000 [slab object] FS: 0000000000000000(0000) GS:ffff888116000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000748f5372c000 CR3: 0000000015408000 CR4: 00000000003406f0 shadow CR4: 00000000003406f0 Stack: 0000000000000000 ffffffff8a0c35e7 ffffffff8a0c3603 ffff8880aaa62c00 ffff8880aaa62c00 0000000000000004 ffff88811145311c 0000000000000005 0000000000000001 ffff8880aaa62000 fffffe8040b4fd40 ffffffff8a0c360d Call Trace: <TASK> [<ffffffff8a0c360d>] __list_del_entry_valid include/linux/list.h:131 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] __list_del_entry include/linux/list.h:248 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] list_del include/linux/list.h:262 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] gtp_dellink+0x16d/0x360 drivers/net/gtp.c:1557 fffffe8040b4fc28 [<ffffffff8a0d0404>] gtp_net_exit_batch_rtnl+0x124/0x2c0 drivers/net/gtp.c:2495 fffffe8040b4fc88 [<ffffffff8e705b24>] cleanup_net+0x5a4/0xbe0 net/core/net_namespace.c:635 fffffe8040b4fcd0 [<ffffffff81754c97>] process_one_work+0xbd7/0x2160 kernel/workqueue.c:3326 fffffe8040b4fd88 [<ffffffff81757195>] process_scheduled_works kernel/workqueue.c:3407 [inline] fffffe8040b4fec0 [<ffffffff81757195>] worker_thread+0x6b5/0xfa0 kernel/workqueue.c:3488 fffffe8040b4fec0 [<ffffffff817782a0>] kthread+0x360/0x4c0 kernel/kthread.c:397 fffffe8040b4ff78 [<ffffffff814d8594>] ret_from_fork+0x74/0xe0 arch/x86/kernel/process.c:172 fffffe8040b4ffb8 [<ffffffff8110f509>] ret_from_fork_asm+0x29/0xc0 arch/x86/entry/entry_64.S:399 fffffe8040b4ffe8 </TASK> Modules linked in: Fixes: eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") Reported-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250217203705.40342-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 5805402 ] vxlan_init() must check vxlan_vnigroup_init() success otherwise a crash happens later, spotted by syzbot. Oops: general protection fault, probably for non-canonical address 0xdffffc000000002c: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000160-0x0000000000000167] CPU: 0 UID: 0 PID: 7313 Comm: syz-executor147 Not tainted 6.14.0-rc1-syzkaller-00276-g69b54314c975 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:vxlan_vnigroup_uninit+0x89/0x500 drivers/net/vxlan/vxlan_vnifilter.c:912 Code: 00 48 8b 44 24 08 4c 8b b0 98 41 00 00 49 8d 86 60 01 00 00 48 89 c2 48 89 44 24 10 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4d 04 00 00 49 8b 86 60 01 00 00 48 ba 00 00 00 RSP: 0018:ffffc9000cc1eea8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000001 RCX: ffffffff8672effb RDX: 000000000000002c RSI: ffffffff8672ecb9 RDI: ffff8880461b4f18 RBP: ffff8880461b4ef4 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000020000 R13: ffff8880461b0d80 R14: 0000000000000000 R15: dffffc0000000000 FS: 00007fecfa95d6c0(0000) GS:ffff88806a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fecfa95cfb8 CR3: 000000004472c000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vxlan_uninit+0x1ab/0x200 drivers/net/vxlan/vxlan_core.c:2942 unregister_netdevice_many_notify+0x12d6/0x1f30 net/core/dev.c:11824 unregister_netdevice_many net/core/dev.c:11866 [inline] unregister_netdevice_queue+0x307/0x3f0 net/core/dev.c:11736 register_netdevice+0x1829/0x1eb0 net/core/dev.c:10901 __vxlan_dev_create+0x7c6/0xa30 drivers/net/vxlan/vxlan_core.c:3981 vxlan_newlink+0xd1/0x130 drivers/net/vxlan/vxlan_core.c:4407 rtnl_newlink_create net/core/rtnetlink.c:3795 [inline] __rtnl_newlink net/core/rtnetlink.c:3906 [inline] Fixes: f9c4bb0 ("vxlan: vni filtering support on collect metadata device") Reported-by: syzbot+6a9624592218c2c5e7aa@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67a9d9b4.050a0220.110943.002d.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250210105242.883482-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 02458fb ] commit c8347f9 ("gpu: host1x: Fix boot regression for Tegra") caused a use of uninitialized mutex leading to below warning when CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled. [ 41.662843] ------------[ cut here ]------------ [ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878 [ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod [ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1 [ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024 [ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 41.679636] pc : __mutex_lock+0x670/0x878 [ 41.683834] lr : __mutex_lock+0x670/0x878 [ 41.688035] sp : ffff800084b77090 [ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000 [ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000 [ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0 [ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000 [ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3 [ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc [ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001 [ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000 [ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000 [ 41.764251] Call trace: [ 41.766695] __mutex_lock+0x670/0x878 [ 41.770373] mutex_lock_nested+0x2c/0x40 [ 41.774134] host1x_intr_start+0x54/0xf8 [host1x] [ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x] [ 41.783935] pm_generic_runtime_resume+0x84/0xc8 [ 41.788485] __rpm_callback+0xa0/0x478 [ 41.792422] rpm_callback+0x15c/0x1a8 [ 41.795922] rpm_resume+0x698/0xc08 [ 41.799597] __pm_runtime_resume+0xa8/0x140 [ 41.803621] host1x_probe+0x810/0xbc0 [host1x] [ 41.807909] platform_probe+0xcc/0x1a8 [ 41.811845] really_probe+0x188/0x800 [ 41.815347] __driver_probe_device+0x164/0x360 [ 41.819810] driver_probe_device+0x64/0x1a8 [ 41.823834] __driver_attach+0x180/0x490 [ 41.827773] bus_for_each_dev+0x104/0x1a0 [ 41.831797] driver_attach+0x44/0x68 [ 41.835296] bus_add_driver+0x23c/0x4e8 [ 41.839235] driver_register+0x15c/0x3a8 [ 41.843170] __platform_register_drivers+0xa4/0x208 [ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x] [ 41.853147] do_one_initcall+0xd4/0x380 [ 41.856997] do_init_module+0x1dc/0x698 [ 41.860758] load_module+0xc70/0x1300 [ 41.864435] __do_sys_init_module+0x1a8/0x1d0 [ 41.868721] __arm64_sys_init_module+0x74/0xb0 [ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8 [ 41.877997] do_el0_svc+0x154/0x1d0 [ 41.881671] el0_svc+0x54/0x140 [ 41.884820] el0t_64_sync_handler+0x120/0x130 [ 41.889285] el0t_64_sync+0x1a4/0x1a8 [ 41.892960] irq event stamp: 69737 [ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8 [ 41.905739] hardirqs last disabled at (69736): [<ffffdd4be59dcd40>] clk_enable_lock+0x98/0x198 [ 41.914314] softirqs last enabled at (68082): [<ffffdd4be466b1d0>] handle_softirqs+0x4c8/0x890 [ 41.922977] softirqs last disabled at (67945): [<ffffdd4be44f02a4>] __do_softirq+0x1c/0x28 [ 41.931289] ---[ end trace 0000000000000000 ]--- Inside the probe function when pm_runtime_enable() is called, the PM core invokes a resume callback if the device Host1x is in a suspended state. As it can be seen in the logs above, this leads to host1x_intr_start() function call which is trying to acquire a mutex lock. But, the function host_intr_init() only gets called after the pm_runtime_enable() where mutex is initialised leading to the use of mutex prior to its initialisation. Fix this by moving the mutex initialisation prior to the runtime PM enablement function pm_runtime_enable() in probe. Fixes: c8347f9 ("gpu: host1x: Fix boot regression for Tegra") Signed-off-by: Rupinderjit Singh <rusingh@redhat.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.ozlabs.org/project/linux-tegra/patch/20250206155803.201942-1-rusingh@redhat.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 129fe71 upstream. When trying to mmap a trace instance buffer that is attached to reserve_mem, it would crash: BUG: unable to handle page fault for address: ffffe97bd00025c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 2862f3067 P4D 2862f3067 PUD 0 Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty torvalds#233 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:validate_page_before_insert+0x5/0xb0 Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89 RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246 RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29 RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08 RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000 R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000 FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0 Call Trace: <TASK> ? __die_body.cold+0x19/0x1f ? __die+0x2e/0x40 ? page_fault_oops+0x157/0x2b0 ? search_module_extables+0x53/0x80 ? validate_page_before_insert+0x5/0xb0 ? kernelmode_fixup_or_oops.isra.0+0x5f/0x70 ? __bad_area_nosemaphore+0x16e/0x1b0 ? bad_area_nosemaphore+0x16/0x20 ? do_kern_addr_fault+0x77/0x90 ? exc_page_fault+0x22b/0x230 ? asm_exc_page_fault+0x2b/0x30 ? validate_page_before_insert+0x5/0xb0 ? vm_insert_pages+0x151/0x400 __rb_map_vma+0x21f/0x3f0 ring_buffer_map+0x21b/0x2f0 tracing_buffers_mmap+0x70/0xd0 __mmap_region+0x6f0/0xbd0 mmap_region+0x7f/0x130 do_mmap+0x475/0x610 vm_mmap_pgoff+0xf2/0x1d0 ksys_mmap_pgoff+0x166/0x200 __x64_sys_mmap+0x37/0x50 x64_sys_call+0x1670/0x1d70 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The reason was that the code that maps the ring buffer pages to user space has: page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]); And uses that in: vm_insert_pages(vma, vma->vm_start, pages, &nr_pages); But virt_to_page() does not work with vmap()'d memory which is what the persistent ring buffer has. It is rather trivial to allow this, but for now just disable mmap() of instances that have their ring buffer from the reserve_mem option. If an mmap() is performed on a persistent buffer it will return -ENODEV just like it would if the .mmap field wasn't defined in the file_operations structure. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home Fixes: 9b7bdf6 ("tracing: Have trace_printk not use binary prints if boot buffer") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…faces commit 2240fed upstream. Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d torvalds#14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface. Reported-and-tested-by: Robert Morris <rtm@csail.mit.edu> Cc: stable <stable@kernel.org> Closes: https://lore.kernel.org/linux-usb/95564.1737394039@localhost/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/c27f3bf4-63d8-4fb5-ac82-09e3cd19f61c@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In Inline mode, the journal is unused, and journal_sectors is zero. Calculating the journal watermark requires dividing by journal_sectors, which should be done only if the journal is configured. Otherwise, a simple table query (dmsetup table) can cause OOPS. This bug did not show on some systems, perhaps only due to compiler optimization. On my 32-bit testing machine, this reliably crashes with the following: : Oops: divide error: 0000 [#1] PREEMPT SMP : CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ torvalds#959 : EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity] ... Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: fb09876 ("dm-integrity: introduce the Inline mode") Cc: stable@vger.kernel.org # 6.11+

…umers While using nvme target with use_srq on, below kernel panic is noticed. [ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514) [ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI .. [ 566.393799] <TASK> [ 566.393807] ? __die_body+0x1a/0x60 [ 566.393823] ? die+0x38/0x60 [ 566.393835] ? do_trap+0xe4/0x110 [ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393881] ? do_error_trap+0x7c/0x120 [ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393911] ? exc_divide_error+0x34/0x50 [ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393939] ? asm_exc_divide_error+0x16/0x20 [ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re] [ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re] [ 566.394057] ? srso_return_thunk+0x5/0x5f [ 566.394068] ? __init_swait_queue_head+0x4a/0x60 [ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core] [ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma] [ 566.394174] ? lock_release+0x22c/0x3f0 [ 566.394187] ? srso_return_thunk+0x5/0x5f Page size and shift info is set only for the user space SRQs. Set page size and page shift for kernel space SRQs also. Fixes: 0c4dcd6 ("RDMA/bnxt_re: Refactor hardware queue memory allocation") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://patch.msgid.link/1740237621-29291-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>

[ Upstream commit 071ed42 ] tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower] Fixes: 80cd22c ("net/sched: cls_api: Support hardware miss to tc action") Signed-off-by: Pierre Riteau <pierre@stackhpc.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250213223610.320278-1-pierre@stackhpc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4ccacf8 ] Brad Spengler reported the list_del() corruption splat in gtp_net_exit_batch_rtnl(). [0] Commit eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl() to destroy devices in each netns as done in geneve and ip tunnels. However, this could trigger ->dellink() twice for the same device during ->exit_batch_rtnl(). Say we have two netns A & B and gtp device B that resides in netns B but whose UDP socket is in netns A. 1. cleanup_net() processes netns A and then B. 2. gtp_net_exit_batch_rtnl() finds the device B while iterating netns A's gn->gtp_dev_list and calls ->dellink(). [ device B is not yet unlinked from netns B as unregister_netdevice_many() has not been called. ] 3. gtp_net_exit_batch_rtnl() finds the device B while iterating netns B's for_each_netdev() and calls ->dellink(). gtp_dellink() cleans up the device's hash table, unlinks the dev from gn->gtp_dev_list, and calls unregister_netdevice_queue(). Basically, calling gtp_dellink() multiple times is fine unless CONFIG_DEBUG_LIST is enabled. Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and delegate the destruction to default_device_exit_batch() as done in bareudp. [0]: list_del corruption, ffff8880aaa62c00->next (autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]) is LIST_POISON1 (ffffffffffffff02) (prev is 0xffffffffffffff04) kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 UID: 0 PID: 1804 Comm: kworker/u8:7 Tainted: G T 6.12.13-grsec-full-20250211091339 #1 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:[<ffffffff84947381>] __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 Code: c2 76 91 31 c0 e8 9f b1 f7 fc 0f 0b 4d 89 f0 48 c7 c1 02 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 e0 c2 76 91 31 c0 e8 7f b1 f7 fc <0f> 0b 4d 89 e8 48 c7 c1 04 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 60 RSP: 0018:fffffe8040b4fbd0 EFLAGS: 00010283 RAX: 00000000000000cc RBX: dffffc0000000000 RCX: ffffffff818c4054 RDX: ffffffff84947381 RSI: ffffffff818d1512 RDI: 0000000000000000 RBP: ffff8880aaa62c00 R08: 0000000000000001 R09: fffffbd008169f32 R10: fffffe8040b4f997 R11: 0000000000000001 R12: a1988d84f24943e4 R13: ffffffffffffff02 R14: ffffffffffffff04 R15: ffff8880aaa62c08 RBX: kasan shadow of 0x0 RCX: __wake_up_klogd.part.0+0x74/0xe0 kernel/printk/printk.c:4554 RDX: __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 RSI: vprintk+0x72/0x100 kernel/printk/printk_safe.c:71 RBP: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object] RSP: process kstack fffffe8040b4fbd0+0x7bd0/0x8000 [kworker/u8:7+netns 1804 ] R09: kasan shadow of process kstack fffffe8040b4f990+0x7990/0x8000 [kworker/u8:7+netns 1804 ] R10: process kstack fffffe8040b4f997+0x7997/0x8000 [kworker/u8:7+netns 1804 ] R15: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc08/0x1000 [slab object] FS: 0000000000000000(0000) GS:ffff888116000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000748f5372c000 CR3: 0000000015408000 CR4: 00000000003406f0 shadow CR4: 00000000003406f0 Stack: 0000000000000000 ffffffff8a0c35e7 ffffffff8a0c3603 ffff8880aaa62c00 ffff8880aaa62c00 0000000000000004 ffff88811145311c 0000000000000005 0000000000000001 ffff8880aaa62000 fffffe8040b4fd40 ffffffff8a0c360d Call Trace: <TASK> [<ffffffff8a0c360d>] __list_del_entry_valid include/linux/list.h:131 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] __list_del_entry include/linux/list.h:248 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] list_del include/linux/list.h:262 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] gtp_dellink+0x16d/0x360 drivers/net/gtp.c:1557 fffffe8040b4fc28 [<ffffffff8a0d0404>] gtp_net_exit_batch_rtnl+0x124/0x2c0 drivers/net/gtp.c:2495 fffffe8040b4fc88 [<ffffffff8e705b24>] cleanup_net+0x5a4/0xbe0 net/core/net_namespace.c:635 fffffe8040b4fcd0 [<ffffffff81754c97>] process_one_work+0xbd7/0x2160 kernel/workqueue.c:3326 fffffe8040b4fd88 [<ffffffff81757195>] process_scheduled_works kernel/workqueue.c:3407 [inline] fffffe8040b4fec0 [<ffffffff81757195>] worker_thread+0x6b5/0xfa0 kernel/workqueue.c:3488 fffffe8040b4fec0 [<ffffffff817782a0>] kthread+0x360/0x4c0 kernel/kthread.c:397 fffffe8040b4ff78 [<ffffffff814d8594>] ret_from_fork+0x74/0xe0 arch/x86/kernel/process.c:172 fffffe8040b4ffb8 [<ffffffff8110f509>] ret_from_fork_asm+0x29/0xc0 arch/x86/entry/entry_64.S:399 fffffe8040b4ffe8 </TASK> Modules linked in: Fixes: eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") Reported-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250217203705.40342-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4082326 ] The namespace percpu counter protects pending I/O, and we can only safely diable the namespace once the counter drop to zero. Otherwise we end up with a crash when running blktests/nvme/058 (eg for loop transport): [ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI [ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 torvalds#232 [ 2352.930438] [ T53909] Tainted: [W]=WARN [ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] [ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180 as the queue is already torn down when calling submit_bio(); So we need to init the percpu counter in nvmet_ns_enable(), and wait for it to drop to zero in nvmet_ns_disable() to avoid having I/O pending after the namespace has been disabled. Fixes: 74d1696 ("nvmet-loop: avoid using mutex in IO hotpath") Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 07b598c upstream. Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline] _raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159 reset_per_cpu_data+0xe6/0x240 [drop_monitor] net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497 genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x157/0x190 net/socket.c:663 ____sys_sendmsg+0x712/0x870 net/socket.c:2378 ___sys_sendmsg+0xf8/0x170 net/socket.c:2432 __sys_sendmsg+0xea/0x1b0 net/socket.c:2461 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x62/0xc7 RIP: 0033:0x7f3f9815aee9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9 RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007 RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768 If drop_monitor is built as a kernel module, syzkaller may have time to send a netlink NET_DM_CMD_START message during the module loading. This will call the net_dm_monitor_start() function that uses a spinlock that has not yet been initialized. To fix this, let's place resource initialization above the registration of a generic netlink family. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9a8afc8 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Cc: stable@vger.kernel.org Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250213152054.2785669-1-Ilia.Gavrilov@infotecs.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

charleskeepax and others added 30 commits April 14, 2020 15:45

ASoC: madera: Remove a couple of stray blank lines

bcbc13d

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200409181311.30247-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>

scsi: Update referenced link to cdrtools

fa17a6d

Link: https://lore.kernel.org/r/20200413170501.13381-1-flameeyes@flameeyes.com Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uninitialized variable use #1

Uninitialized variable use #1

ghost commented Apr 25, 2020 •

edited by ghost

Loading

Uninitialized variable use #1

Uninitialized variable use #1

Conversation

ghost commented Apr 25, 2020 • edited by ghost Loading

ghost commented Apr 25, 2020 •

edited by ghost

Loading