usb: dwc2: Fix host exit from hibernation flow.

In case when a hub is connected to DWC2 host
auto suspend occurs and host goes to
hibernation. When any device connected to hub
host hibernation exiting incorrectly.

- Added dwc2_hcd_rem_wakeup() function call to
  exit from suspend state by remote wakeup.

- Increase timeout value for port suspend bit to be set.

Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Artur Petrosyan <arturp@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/dwc2/hcd.c

@@ -5435,7 +5435,7 @@ int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg)
 	dwc2_writel(hprt0, hsotg->regs + HPRT0);
 
 	/* Wait for the HPRT0.PrtSusp register field to be set */
-	if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 300))
+	if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000))
 		dev_warn(hsotg->dev, "Suspend wasn't generated\n");
 
 	/*
@@ -5616,6 +5616,8 @@ int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
 		return ret;
 	}
 
+	dwc2_hcd_rem_wakeup(hsotg);
+
 	hsotg->hibernated = 0;
 	hsotg->bus_suspended = 0;
 	hsotg->lx_state = DWC2_L0;