Camera: Wansview W6

Wansview W6

An outdoor camera in a sturdy metal housing.

Hardware

• SoC: Ingenic T21N (64MB RAM)
• Image Sensor:
  • OV2735b (2MP)
  • OS02G10 (2MP)
• Network:
  • Ethernet
  • Wi-Fi: Realtek RTL8188FTV
• Flash Chip: NOR 16MB
• Power: 12V DC barrel jack

Installation:

1. Download a fresh firmware image for your camera from https://thingino.com/.
2. Place the firmware file on a blank FAT32 SD card as ub_ajyall.bin.
3. Insert the card into the camera and power it up while holding down the reset button, release the button shortly after booting. Camera should start burning the new image:

   reading ub_ajyall.bin
   fs_read:ub_ajyall.bin len_read=16777216