i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver

Add Nuvoton NPCM BMC I2C controller driver.

Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

drivers/i2c/busses/Kconfig

@@ -794,6 +794,15 @@ config I2C_NOMADIK
 	  I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
 	  as well as the STA2X11 PCIe I/O HUB.
 
+config I2C_NPCM7XX
+	tristate "Nuvoton I2C Controller"
+	depends on ARCH_NPCM7XX || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  Nuvoton I2C controller, which is available on the NPCM7xx BMC
+	  controller.
+	  Driver can also support slave mode (select I2C_SLAVE).
+
 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
 	help

drivers/i2c/busses/Makefile

@@ -80,6 +80,7 @@ obj-$(CONFIG_I2C_MT7621)	+= i2c-mt7621.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
 obj-$(CONFIG_I2C_NOMADIK)	+= i2c-nomadik.o
+obj-$(CONFIG_I2C_NPCM7XX)	+= i2c-npcm7xx.o
 obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
 obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
 obj-$(CONFIG_I2C_OWL)		+= i2c-owl.o