Management eol of the systray

README.txt

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2006, 2016, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2006, 2017, Oracle and/or its affiliates. All rights reserved.
 #
 
 
@@ -13,11 +13,10 @@ OpenGrok - a wicked fast source browser
 5.  OpenGrok setup
 6.  Optional Command Line Interface Usage
 7.  Change web application properties or name
-8.  OpenGrok systray
-9.  Information for developers
-10. Tuning OpenGrok for large code bases
-11. Authors
-12. Contact us
+8.  Information for developers
+9. Tuning OpenGrok for large code bases
+10. Authors
+11. Contact us
 
 
 1. Introduction
@@ -694,36 +693,11 @@ Deploy the modified .war file in tomcat:
 
   * just copy the source.war file to TOMCAT_INSTALL/webapps directory.
 
-8. OpenGrok systray
--------------------
-
-The indexer can be setup with agent and systray GUI control application.
-This is optional step for those who wish to monitor and configure OpenGrok
-from their desktop using systray application.
-
-An example opengrok-agent.properties file is provided, which can be used when
-starting special OpenGrok Agent, where you can connect with a systray GUI
-application.
-
-To start the indexer with configuration run:
-
-  $ java -cp ./opengrok.jar org.opensolaris.opengrok.management.OGAgent \
-        --config opengrok-agent.properties
-
-Then from the remote machine one can run:
-
-  $ java -cp ./opengrok.jar \
-        org.opensolaris.opengrok.management.client.OpenGrokTrayApp
-
-assuming configuration permits remote connections (i.e. not listening on
-localhost, but rather on a physical network interface).
-
-This agent is work in progress, so it might not fully work.
 
-9. Information for developers
+8. Information for developers
 -----------------------------
 
-9.0 Building
+8.0 Building
 ------------
 
 Just run 'ant' from command line in the top-level directory or use build
@@ -733,13 +707,13 @@ Note: in case you are behind http proxy, use ANT_OPTS to download jflex, lucene
 E.g. $ ANT_OPTS="-Dhttp.proxyHost=?.? -Dhttp.proxyPort=80" ant
 
 
-9.0.1 Package build
+8.0.1 Package build
 -------------------
 
 Run 'ant package' to create package (specific for the operating system this is
 being executed on) under the dist/ directory.
 
-9.1 Unit testing
+8.1 Unit testing
 ----------------
 
 Note: For full coverage report your system has to provide proper junit test
@@ -763,7 +737,7 @@ The tests are then run as follows:
 To check if the test completed without error look for AssertionFailedError
 occurences in the TESTS-TestSuites.xml file produced by the test run.
 
-9.2 Using Findbugs
+8.2 Using Findbugs
 ------------------
 
 If you want to run Findbugs (http://findbugs.sourceforge.net/) on OpenGrok,
@@ -798,7 +772,7 @@ under the lib directory):
 There is also a findbugs-xml ant target that can be used to generate XML files
 that can later be parsed, e.g. by Jenkins.
 
-9.3 Using Jacoco
+8.3 Using Jacoco
 --------------
 
 If you want to check test coverage on OpenGrok, download jacoco from
@@ -813,7 +787,7 @@ Now you should get output data in jacoco.exec
 
 Look at jacoco/index.html to see how complete your tests are.
 
-9.4 Using Checkstyle
+8.4 Using Checkstyle
 --------------------
 
 To check that your code follows the standard coding conventions,
@@ -846,7 +820,7 @@ checkstyle under the lib directory):
 
   $ ant checkstyle -Dcheckstyle.home=lib/checkstyle
 
-9.5 Using PMD and CPD
+8.5 Using PMD and CPD
 ---------------------
 
 To check the quality of the OpenGrok code you can also use PMD
@@ -883,7 +857,7 @@ Which will result in:
   $ ls pmd
   cpd_report.xml cpd_report.txt
 
-9.6 Using JDepend
+8.6 Using JDepend
 -----------------
 
 To see dependencies in the source code, you can use JDepend from
@@ -906,7 +880,7 @@ Output is stored in the jdepend directory:
   $ ls jdepend/
   report.txt  report.xml
 
-9.7 Using SonarQube
+8.7 Using SonarQube
 -------------------
 
 Use a sonar runner with included sonar-project.properties properties,
@@ -919,7 +893,7 @@ e.g. using bash:
     -Dsonar.host.url=http://${SERVERIP}:9000
     -Dsonar.jdbc.url=jdbc:h2:tcp://${SERVERIP}:9092/sonar
 
-9.8 Using Travis CI
+8.8 Using Travis CI
 -------------------
 
 Travis depends on updated and working maven build.
@@ -928,13 +902,13 @@ you should be able to connect your Github to Travis CI.
 OpenGroks Travis is here: https://travis-ci.org/OpenGrok/OpenGrok
 
 
-9.9 Maven
+8.9 Maven
 ------------------
 The build can now be done through Maven (https://maven.apache.org/) which takes care of the dependency management
 and setup (calls Ant for certain actions).
 
 
-9.9.1 Unit Testing
+8.9.1 Unit Testing
 -------------------------
 You can test the code at the moment by running `./mvn test` which will execute *all* tests.
 Conditionally, if you don't have every type of repository installed, you can set it to unit-test only those which are
@@ -946,10 +920,10 @@ You can also force a specific repository test from running through the following
 
 > ./mvnw test -Djunit-force-all=false -Djunit-force-git=true
 
-10. Tuning OpenGrok for large code bases
+9. Tuning OpenGrok for large code bases
 ---------------------------------------
 
-10.1 Almost atomic index flip using ZFS
+9.1 Almost atomic index flip using ZFS
 ---------------------------------------
 
 While indexing big source repos you might consider using ZFS filesystem to give
@@ -960,7 +934,7 @@ incrementally index in parallel to having the current sources and index in sync.
 the ones that were updated by SCM/index and start tomcat again - outage is
 minimal, sources+indexes are ALWAYS in sync, users see the truth)
 
-10.2 JVM tuning
+9.2 JVM tuning
 ---------------
 
 OpenGrok script by default uses 2G of heap and 16MB per thread for flush size of
@@ -1001,7 +975,7 @@ For tomcat you can easily get this done by creating conf/setenv.sh:
 
  export JAVA_OPTS
 
-10.3 Tomcat/Apache tuning
+9.3 Tomcat/Apache tuning
 -------------------------
 
 For tomcat you might also hit a limit for http header size (we use it to send
@@ -1018,7 +992,7 @@ The same tuning to Apache can be done with the LimitRequestLine directive:
   LimitRequestLine 65536
   LimitRequestFieldSize 65536
 
-10.4 Open File hard and soft limits
+9.4 Open File hard and soft limits
 -----------------------------------
 
 The initial index creation process is resource intensive and often the error
@@ -1028,15 +1002,15 @@ avoid this increase the ulimit value to a higher number.
 It is noted that the hard and soft limit for open files of 10240 works for mid
 sized repositores and so the recommendation is to start with 10240.
 
-10.5 Multi-project search speed tip
+9.5 Multi-project search speed tip
 -----------------------------------
 
 If multi-project search is performed frequently, it might be good to warm
 up file system cache after each reindex. This can be done e.g. with
 https://github.com/hoytech/vmtouch
 
 
-11. Authors
+10. Authors
 -----------
 
 The project has been originally conceived in Sun Microsystems by Chandan B.N.
@@ -1049,7 +1023,7 @@ Knut Anders Hatlen, Oracle. http://blogs.oracle.com/kah/
 Lubos Kosco, Oracle. http://blogs.oracle.com/taz/
 Vladimir Kotal, Oracle. http://blogs.oracle.com/vlad/
 
-12. Contact us
+11. Contact us
 --------------
 
 Feel free to participate in discussion on the mailing lists:

build.xml

@@ -114,13 +114,6 @@ Copyright (c) 2005, 2017, Oracle and/or its affiliates. All rights reserved.
 
     <property name="mvn.repository" value="http://repo1.maven.org/maven2"/>
 
-    <available property="compileSystrayClient" classname="java.awt.TrayIcon"/>
-
-    <target name="-exclude-client" unless="compileSystrayClient">
-        <echo>JDK doesn't have java.awt.TrayIcon, excluding building of systray client ... </echo>
-        <property name="excludes" value="org/opensolaris/opengrok/management/client/**"/>
-    </target>
-
     <property name="jflex-version" value="1.6.1"/>
 
     <path id="lib.search.path">
@@ -325,7 +318,7 @@ Copyright (c) 2005, 2017, Oracle and/or its affiliates. All rights reserved.
     </target>
 
     <!-- injecting jacoco, too -->
-    <target name="-pre-init" depends="-touch-manifest, -exclude-client, -set-jacocoagent"/>
+    <target name="-pre-init" depends="-touch-manifest, -set-jacocoagent"/>
 
     <!--
         Initialize a property holding a list of jar files on which

opengrok-indexer/pom.xml

@@ -60,14 +60,6 @@ Copyright (c) 2010, 2011, Oracle and/or its affiliates. All rights reserved.
                 <directory>../src/org/opensolaris/opengrok/index/</directory>
                 <excludes><exclude>*.java</exclude></excludes>
             </resource>
-            <resource>
-                <targetPath>org/opensolaris/opengrok/management/</targetPath>
-                <directory>../src/org/opensolaris/opengrok/management/</directory>
-                <includes>
-                  <include>*.properties</include>
-                  <include>**/*.gif</include>
-                </includes>
-            </resource>
             <resource>
                 <targetPath>org/opensolaris/opengrok/history/</targetPath>
                 <directory>../src/org/opensolaris/opengrok/history/</directory>