SAAS Autograder

Travis C. I.

####Berkeley SAAS w/ edX

Berkeley folks
- There is an AMI (id ami-df77a8b6) that includes latest version of the autograder.
Other folks
- the autograder code is at github:saasbook/rag.

Usage

Launch an EC2 instance (micro is fine) with autograder AMI
hw6Grader1 has the latest version of rag, so move the content from it to the new instance.
- You might want to move the logs before you copy as they take up a lot of space.
NOTE: Somebody should make a new AMI with the updated connection code, and enabled to pull from the saasbook repos

Configuration

There are two files which control the autograder: config/autograders.yml and config/conf.yml.

conf.yml includes the following:

    live:
      queue_uri: 'uri'
      autograders_yml: ./config/autograders.yml
      django_auth:
        username: 'username'
        password: 'password'
      user_auth: #may be unnecessary
        user_name: 'username'
        user_pass: 'password'
      halt: false # default: true, exit when all submission queues are empty
      sleep_duration: 30

live : the name that will be given on the command line when calling the autograder command
The rest of the information should be filled in appropriately.

NOTE: autograders_yml gives the path from the rag/ directory.

autograders.yml describes the actual autograder that will be running. An example is:
```
    assign-6-queue:
      name: "BerkeleyX-cs169x-p3"
      type: HW5Grader
      due:  20121217120100
      grace_period: 0
      parts:
        assign-2-part-1:
          uri: ./hw6.yml
          type: MigrationGrader
```
- name : the name of the queue that will be pulled from, this must match what edX is submitting assignments to
- due : in YYYYMMDDHHMMSS format
- parts : used to describe the parts of each assignment
- uri : a path to the solutions from the rag base directory
- type : the type of autograder that will be used to grade the assignment
- grace : period is used to give late credit, this should be refactored further to allow specification for late penalties in this config file

Execution and tests

####To run the autograder connection program:

    while true ; do ./run_edx_client.rb live ; done

The grader can crash, this starts it up again.

####Example Commands to do all the grading for HW1:

######Sanity specs

    ./grade ../hw/ruby-calisthenics/skeletons/part1.rb ../hw/ruby-calisthenics/sanity_specs/part1_spec.rb
    ./grade ../hw/ruby-calisthenics/skeletons/part2.rb ../hw/ruby-calisthenics/sanity_specs/part2_spec.rb
    ./grade ../hw/ruby-calisthenics/skeletons/part3.rb ../hw/ruby-calisthenics/sanity_specs/part3_spec.rb
    ./grade ../hw/ruby-calisthenics/skeletons/part4.rb ../hw/ruby-calisthenics/sanity_specs/part4_spec.rb
    ./grade ../hw/ruby-calisthenics/skeletons/part5.rb ../hw/ruby-calisthenics/sanity_specs/part5_spec.rb
    ./grade ../hw/ruby-calisthenics/skeletons/part6.rb ../hw/ruby-calisthenics/sanity_specs/part6_spec.rb
    ./grade ../hw/ruby-calisthenics/skeletons/part7.rb ../hw/ruby-calisthenics/sanity_specs/part7_spec.rb

######Full Specs

     ./grade ../hw-solutions/ruby-calisthenics/lib/part1.rb ../hw-solutions/ruby-calisthenics/spec/part1_spec.rb
     ./grade ../hw-solutions/ruby-calisthenics/lib/part2.rb ../hw-solutions/ruby-calisthenics/spec/part2_spec.rb
     ./grade ../hw-solutions/ruby-calisthenics/lib/part3.rb ../hw-solutions/ruby-calisthenics/spec/part3_spec.rb
     ./grade ../hw-solutions/ruby-calisthenics/lib/part4.rb ../hw-solutions/ruby-calisthenics/spec/part4_spec.rb
     ./grade ../hw-solutions/ruby-calisthenics/lib/part5.rb ../hw-solutions/ruby-calisthenics/spec/part5_spec.rb
     ./grade ../hw-solutions/ruby-calisthenics/lib/part6.rb ../hw-solutions/ruby-calisthenics/spec/part6_spec.rb
     ./grade ../hw-solutions/ruby-calisthenics/lib/part7.rb ../hw-solutions/ruby-calisthenics/spec/part7_spec.rb

There is also checking the skeletons against the full specs and the sanity specs against the full solutions.

The mutation testing/feature grader (HW 3)

At a high level HW3 and others that use FeatureGrader work by running student-submitted Cucumber scenarios against modified versions of a instructor-provided app.

The Following Diagram roughly describes the flow of the autograder :

Each step defined in the .yml file can have scenarios to run iff that step passes.

Example from hw3.yml:

- &step1-1
      FEATURE: features/filter_movie_list.feature
      pass: true
      weight: 0.2
      if_pass:
      - &step1-3
      FEATURE: features/filter_movie_list.feature
      version: 2
      weight: 0.075
      desc: "results = [G, PG-13] movies"
      failures:
      - *restrict_pg_r
      - *all_x_selected

In this case if step1-1 passes, Step 1-3 will be run. If step1-1 fails then step1-3 will not run and the student will not receive points for it. It is important that the outer step be less restrictive than the inner step (If the outer one fails, there should be no way that the inner one could pass).

Step1-3 has two scenarios specified as failures; this indicates that when the cucumber features are run, both of those scenarios should fail. In other words, when the mutation for this step is added to the app, the student’s tests should detect the change and fail. (Example: If the test is to ensure that data is sorted, and the mutation is that the data is in reverse order, the student’s test should fail because the app is not behaving as expected)

Defining a new step:

In order to add a new step the following must be done:

Add an entry to the .yml file.
The new entry should be a hash with the following properties:
1. FEATURE, a relative path to the Cucumber feature that will be run for this step.
2. weight, the fraction of total points on this homework represented by this feature
3. version: This sets an environment variable that the mutation-test app can use to add any modifications desired to the app before the feature is run.
4. desc: A string describing the step, used when providing feedback
Optional properties:
1. failures (list): scenarios that should fail in this step
2. if_pass (list): steps to run iff this step passes.

Defining a new Scenario:

To define a new scenario add a new entry to the "scenarios" hash in the .yml file. It is a good idea to set an alias for the scenario so it can be referenced later inside of steps.

The entry should contain:

match: A regular expression that will identify the name of this scenario. (Used when parsing cucumber output to see if this scenario passed or failed)
desc: A description of the scenario. (Used to give feedback to the student)

Adding a mutation to the app:

When a feature is run, the environment variable version will be set to the value of the version property for that feature. Use this as a feature flag in the app (by checking ENV["version"]) to trigger a "bug", e.g. reversing sort order/not returning all data.

License

mtc2013/rag

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages