Skip to content

Launching the software

Jump to bottom
Michele Ferri edited this page Mar 24, 2020 · 1 revision

After flashing the firmware, connect the Arduino board to the computer via USB. When you launch Mini4WD Chrono, the small badge on the top right will be green and say "board connected". If you have problems, go to the configuration tab, change the USB port, and save settings. Disconnect and reconnect the arduino board to USB, and reload the program.

NOTE: the arduino board must be connected to the computer USB BEFORE launching the program.

Some Arduino Nano clones may need the CH340 USB driver to be recognized. You can download it here.

<- back to the home page

Clone this wiki locally