Merge pull request #239 from OADA/dependabot/github_actions/actions/c… #801
awlaytonbuild-and-push-services.yml
on: push
setup
5s
Build and cache shared Docker layers
43s
Matrix: Build and Push images to DockerHub and GHCR
create-release
0s
Matrix: Snyk Checks
Annotations
18 errors and 71 warnings
|
Snyk Checks (webhooks, oada)
Unable to upload "./securecodewarrior.sarif" as it is not valid SARIF:
- instance.runs[0].results[0].fixes[0].artifactChanges does not meet minimum length of 1
- instance.runs[0].results[1].fixes[0].artifactChanges does not meet minimum length of 1
|
|
Snyk Checks (rev-graph-update, oada)
Unable to upload "./securecodewarrior.sarif" as it is not valid SARIF:
- instance.runs[0].results[0].fixes[0].artifactChanges does not meet minimum length of 1
- instance.runs[0].results[1].fixes[0].artifactChanges does not meet minimum length of 1
|
|
Snyk Checks (auth, oada)
Unable to upload "./securecodewarrior.sarif" as it is not valid SARIF:
- instance.runs[0].results[0].fixes[0].artifactChanges does not meet minimum length of 1
- instance.runs[0].results[1].fixes[0].artifactChanges does not meet minimum length of 1
|
|
Snyk Checks (http-handler, oada)
Unable to upload "./securecodewarrior.sarif" as it is not valid SARIF:
- instance.runs[0].results[0].fixes[0].artifactChanges does not meet minimum length of 1
- instance.runs[0].results[1].fixes[0].artifactChanges does not meet minimum length of 1
|
|
Snyk Checks (well-known, oada)
Unable to upload "./securecodewarrior.sarif" as it is not valid SARIF:
- instance.runs[0].results[0].fixes[0].artifactChanges does not meet minimum length of 1
- instance.runs[0].results[1].fixes[0].artifactChanges does not meet minimum length of 1
|
|
Snyk Checks (shares, oada)
The operation was canceled.
|
|
Snyk Checks (startup, oada)
The job was canceled because "webhooks_oada" failed.
|
|
Snyk Checks (startup, oada)
The operation was canceled.
|
|
Snyk Checks (permissions-handler, oada)
The job was canceled because "webhooks_oada" failed.
|
|
Snyk Checks (permissions-handler, oada)
The operation was canceled.
|
|
Snyk Checks (sync-handler, oada)
The job was canceled because "webhooks_oada" failed.
|
|
Snyk Checks (sync-handler, oada)
The operation was canceled.
|
|
Snyk Checks (users, oada)
The job was canceled because "webhooks_oada" failed.
|
|
Snyk Checks (users, oada)
The operation was canceled.
|
|
Snyk Checks (write-handler, oada)
The job was canceled because "webhooks_oada" failed.
|
|
Snyk Checks (write-handler, oada)
The operation was canceled.
|
|
Snyk Checks (support/proxy, support/proxy)
The job was canceled because "webhooks_oada" failed.
|
|
Snyk Checks (support/proxy, support/proxy)
The operation was canceled.
|
|
setup
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
setup
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
setup
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (support/proxy-http-only, support/proxy, http-only)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (support/proxy-http-only, support/proxy, http-only)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (write-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (write-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (shares, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (shares, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (support/proxy, support/proxy)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (support/proxy, support/proxy)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (sync-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (sync-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (http-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (http-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (well-known, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (well-known, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (webhooks, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (webhooks, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (permissions-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (permissions-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (rev-graph-update, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (rev-graph-update, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (users, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (users, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (startup, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (startup, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (auth, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Build and Push images to DockerHub and GHCR (auth, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (webhooks, oada)
The following actions uses node12 which is deprecated and will be forced to run on node16: SecureCodeWarrior/github-action-add-sarif-contextual-training@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Snyk Checks (webhooks, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (webhooks, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (webhooks, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (rev-graph-update, oada)
The following actions uses node12 which is deprecated and will be forced to run on node16: SecureCodeWarrior/github-action-add-sarif-contextual-training@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Snyk Checks (rev-graph-update, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (rev-graph-update, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (rev-graph-update, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (auth, oada)
The following actions uses node12 which is deprecated and will be forced to run on node16: SecureCodeWarrior/github-action-add-sarif-contextual-training@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Snyk Checks (auth, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (auth, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (auth, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (http-handler, oada)
The following actions uses node12 which is deprecated and will be forced to run on node16: SecureCodeWarrior/github-action-add-sarif-contextual-training@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Snyk Checks (http-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (http-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (http-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (well-known, oada)
The following actions uses node12 which is deprecated and will be forced to run on node16: SecureCodeWarrior/github-action-add-sarif-contextual-training@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Snyk Checks (well-known, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (well-known, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (well-known, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (shares, oada)
The following actions uses node12 which is deprecated and will be forced to run on node16: SecureCodeWarrior/github-action-add-sarif-contextual-training@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
Snyk Checks (shares, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (shares, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (shares, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (startup, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (startup, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (startup, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (permissions-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (permissions-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (permissions-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (sync-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (sync-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (sync-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (users, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (users, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (users, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (write-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (write-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (write-handler, oada)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (support/proxy, support/proxy)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (support/proxy, support/proxy)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Snyk Checks (support/proxy, support/proxy)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|