feat(bw128): add option to invert LCD/OLED display

[philmoz]

Tested on OLED (T14 and T20v2) and LCD (X7, MT12 and TLite).

TODO:

• Companion suport.

[philmoz]

I moved the option to the hardware tab as suggested in discord. Thanks @pfeerick

[inventor7777]

Will this be added to the final 2.10, or do I have to get the special version to get this feature?

[pfeerick]

2.10 is feature complete, so this will be in 2.11 if merged.

…

On Mon, 29 Apr 2024, 3:36 am inventor7777, ***@***.***> wrote: Will this be added to the final 2.10, or do I have to get the special version to get this feature? — Reply to this email directly, view it on GitHub <#4933 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJ66KN3QYSFQ7OAWF7DGXDY7UXTFAVCNFSM6AAAAABG33CLP6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBRGU3TANZSGQ> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[inventor7777]

2.10 is feature complete, so this will be in 2.11 if merged.

Sounds good! I hope it is added eventually, because I could definitely use it.

[arthurson]

i remembered this function has been required on discord around years ago , so happy everyone can use it now

[DuckyScr]

Hi, I have downloaded the build and it doesnt have persistance. I have been waiting for this and also asked on discord so it is really good feature for me and whenever I chek it and it toggles and works. BUT after I turn the radio off and then on it is not checked and not working. Tested on RadioMaster Boxer

[philmoz]

It's working on the B&W radios I have; but I don't have a boxer to test on.

Can you turn on the option and before restarting copy the RADIO/radio.yaml file off the radio.
Then restart and copy the same file off the radio again.
Please upload both file here in a ZIP file.

[DuckyScr]

Archive.zip
here it is and what Ive found out is that the check button in hardware tab is still checked after restart, just the screen is not inverted and btw my sd card content is on version 2.10.0 if that helps :)

[philmoz]

Thanks for that - can you try the version in this ZIP file please.

boxer_lcdinvert_240514.bin.zip

[DuckyScr]

Archive.zip
still the same issue, there is the yml

[philmoz]

Can you confirm - after a reboot if you turn the option off and back on then the screen inverts?

[DuckyScr]

Yes, that is exactly what it does

[philmoz]

Thanks.again - here's another firmware to try (no need to upload the radio.yaml files).

boxer_invert_try2.bin.zip

[DuckyScr]

still the same issue

[3djc]

Working fine here, even with your radio.yml

https://photos.app.goo.gl/nBNZbu6kgghicmtF7

[DuckyScr]

And what version of sdcard content you have?

[3djc]

It doesn't matter there, only radio and models are read at that stage, but if you post a full copy of your sd, I can try it

[DuckyScr]

Ok so I'll try to find some issues or smth that woukd cause the problem. Thanks for help :)

[pfeerick]

Only one minor detail 🤭

• Companion: It updates RADIO/radio.yml, but does not set the correct value. I was trying to go from inverted, back to normal, but it wrote invertLCD: 1 on the update. And same when going from normal to inverted (writes original state again). This was with a build I grabbed just before you rebased. T-Pro profile.

Everything else looks great... well, screen quality (at a budget) permitting. Boxer, TPro, TX12 (LCD) and TProV2 (OLED)

[philmoz]

• Companion: It updates RADIO/radio.yml, but does not set the correct value. I was trying to go from inverted, back to normal, but it wrote invertLCD: 1 on the update.

Copy paste error - should be fixed now.

[pfeerick]

Perfect, thanks! :)