_hud_common.cfg

// HUD variables
set _hud_configure 0 "configure the HUD"
seta hud_configure_teamcolorforced 0 "force display of team colors in configure mode"
seta hud_configure_checkcollisions 0 "check for collisions against other panels when in HUD configure mode"
seta hud_configure_bg_minalpha 0.25 "minimum panel background alpha when in HUD configure mode"
seta hud_configure_grid_alpha 0.15 "alpha for visible grid when in configure mode"
seta hud_configure_vertical_lines 0.5 "list of space-separated intervals at which to draw a vertical line, useful for aligning panels; e.g. \"0.5\" draws a vertical line in the center, \"0.25 0.5 0.75\" draws a vertical line every quarter of the screen width"

seta hud_cursormode 1 "handle mouse input in cursor mode when CSQC displays a cursor"

seta hud_fontsize 11 "text font size for the HUD"
seta hud_width 560 "2D virtual width for the HUD"

seta hud_colorset_foreground_1 "2" "primary priority (important names, etc.)"
seta hud_colorset_foreground_2 "3" "secondary priority (items, locations, numbers, etc.)"
seta hud_colorset_foreground_3 "4" "tertiary priority or relatively inconsequential text"
seta hud_colorset_foreground_4 "1" "notice/attention grabbing texting"
seta hud_colorset_kill_1 "1" "'bad' or 'dangerous' text (death messages against you, kill notifications, etc.)"
seta hud_colorset_kill_2 "3" "similar to above, but less important, OR a highlight out of above message type"
seta hud_colorset_kill_3 "4" "'good' or 'beneficial' text (you fragging someone, etc.)"
seta hud_colorset_background "7" "neutral/unimportant text"

seta hud_speed_unit "1" "speed unit; \"1\" = qu/s, \"2\" = m/s, \"3\" = km/h, \"4\" = mph, \"5\" = knots"

// general HUD panel cvars (i.e. shouldn't be adjusted by a skin config)
seta hud_panel_weapons          1 "enable this panel"
seta hud_panel_ammo             1 "enable this panel"
seta hud_panel_powerups         1 "enable this panel"
seta hud_panel_healtharmor      1 "enable this panel"
seta hud_panel_notify           1 "enable this panel"
seta hud_panel_timer            1 "enable this panel"
seta hud_panel_radar            1 "enable this panel, \"2\" = also enable in non-teambased game modes"
seta hud_panel_score            1 "enable this panel"
seta hud_panel_racetimer        1 "enable this panel"
seta hud_panel_vote             1 "enable this panel"
seta hud_panel_modicons         1 "enable this panel"
seta hud_panel_pressedkeys      1 "enable this panel, \"1\" = show only when spectating other players, \"2\" = show always"
seta hud_panel_chat             1 "enable this panel"
seta hud_panel_engineinfo       0 "enable this panel"
seta hud_panel_infomessages     1 "enable this panel"
seta hud_panel_physics          3 "enable this panel, \"1\" = show if not observing, \"2\" = show always, \"3\" = show only in Race/CTS if not observing"
seta hud_panel_centerprint      1 "enable this panel"
//seta hud_panel_minigameboard    1 "enable this panel"
//seta hud_panel_minigamestatus   1 "enable this panel"
//seta hud_panel_minigamehelp     1 "enable this panel"
//seta hud_panel_minigamemenu     0 "enable this panel"
//seta hud_panel_mapvote          1 "enable this panel"
seta hud_panel_itemstime        2 "enable this panel, \"1\" = show when spectating, \"2\" = even playing in warmup-stage"
//seta hud_panel_quickmenu        1 "enable this panel"
//seta hud_panel_scoreboard       1 "enable this panel"
seta hud_panel_scoreboard_accuracy 1 "show weapon accuracy stats panel in the scoreboard; colors can be configured with accuracy_color* cvars"
seta hud_panel_scoreboard_ctf_leaderboard 1 "show a capture time rankings leaderboard in the scoreboard if allowed by the server"
seta hud_panel_scoreboard_itemstats 1 "show item stats panel in the scoreboard"
seta hud_panel_strafehud        3 "enable this panel, \"1\" = show if not observing, \"2\" = show always, \"3\" = show only in Race/CTS if not observing"
seta hud_panel_pickup           1 "enable this panel"

seta hud_panel_weapons_dynamichud          1 "apply the dynamic HUD effects to this panel"
seta hud_panel_ammo_dynamichud             1 "apply the dynamic HUD effects to this panel"
seta hud_panel_powerups_dynamichud         1 "apply the dynamic HUD effects to this panel"
seta hud_panel_healtharmor_dynamichud      1 "apply the dynamic HUD effects to this panel"
seta hud_panel_notify_dynamichud           1 "apply the dynamic HUD effects to this panel"
seta hud_panel_timer_dynamichud            1 "apply the dynamic HUD effects to this panel"
seta hud_panel_radar_dynamichud            1 "apply the dynamic HUD effects to this panel"
seta hud_panel_score_dynamichud            1 "apply the dynamic HUD effects to this panel"
seta hud_panel_racetimer_dynamichud        1 "apply the dynamic HUD effects to this panel"
seta hud_panel_vote_dynamichud             1 "apply the dynamic HUD effects to this panel"
seta hud_panel_modicons_dynamichud         1 "apply the dynamic HUD effects to this panel"
seta hud_panel_pressedkeys_dynamichud      1 "apply the dynamic HUD effects to this panel"
seta hud_panel_engineinfo_dynamichud       1 "apply the dynamic HUD effects to this panel"
seta hud_panel_infomessages_dynamichud     0 "apply the dynamic HUD effects to this panel"
seta hud_panel_physics_dynamichud          1 "apply the dynamic HUD effects to this panel"
seta hud_panel_centerprint_dynamichud      1 "apply the dynamic HUD effects to this panel"
seta hud_panel_itemstime_dynamichud        1 "apply the dynamic HUD effects to this panel"
seta hud_panel_scoreboard_dynamichud       0 "apply the dynamic HUD effects to this panel"
seta hud_panel_strafehud_dynamichud        1 "apply the dynamic HUD effects to this panel"
seta hud_panel_pickup_dynamichud           1 "apply the dynamic HUD effects to this panel"

seta hud_panel_weapons_ammo_full_shells 60 "show 100% of the status bar at this ammo count"
seta hud_panel_weapons_ammo_full_nails 320 "show 100% of the status bar at this ammo count"
seta hud_panel_weapons_ammo_full_cells 180 "show 100% of the status bar at this ammo count"
seta hud_panel_weapons_ammo_full_rockets 160 "show 100% of the status bar at this ammo count"
seta hud_panel_weapons_ammo_full_fuel 100 "show 100% of the status bar at this ammo count"
seta hud_panel_weapons_hide_ondeath 0 "hide this panel when dead"
seta hud_panel_weapons_orderbyimpulse "1" "list weapons in their impulse order instead of priority"

seta hud_panel_ammo_maxammo "40" "when you have this much ammo, the ammo status bar is full"
seta hud_panel_ammo_hide_ondeath 0 "hide this panel when dead"

seta hud_panel_powerups_hide_ondeath 0 "hide this panel when dead"

seta hud_panel_healtharmor_fuelbar_startalpha "0.3" "start alpha of the fuel bar"
seta hud_panel_healtharmor_oxygenbar_startalpha "0.2" "start alpha of the oxygen bar"
seta hud_panel_healtharmor_maxhealth "200" "when you have this much health, the health status bar is full"
seta hud_panel_healtharmor_maxarmor "200" "when you have this much armor, the armor status bar is full"
seta hud_panel_healtharmor_progressbar_gfx_damage 5 "show damage effect when damaged at least by this amount; \"0\" disables the effect"
seta hud_panel_healtharmor_progressbar_gfx_lowhealth 40 "health progress bar blinks when health is lower than this amount"
seta hud_panel_healtharmor_hide_ondeath 0 "hide this panel when dead"

seta hud_panel_timer_increment "0" "show elapsed time instead of remaining time"
seta hud_panel_timer_secondary "1" "secondary timer; \"0\" = hide, \"1\" = show, \"2\" = show swapped"
seta hud_panel_timer_unbound "0" "show seconds leading up to the start of the match"

seta hud_panel_engineinfo_framecounter_exponentialmovingaverage 1 "use an averaging method for calculating fps instead of counting frametime like engine does"
seta hud_panel_engineinfo_framecounter_exponentialmovingaverage_new_weight 0.1 "weight of latest data point"
seta hud_panel_engineinfo_framecounter_exponentialmovingaverage_instantupdate_change_threshold 0.5 "threshold for fps change when to update instantly, to make big fps changes update faster"
seta hud_panel_engineinfo_framecounter_decimals "0" "amount of decimals to show"
seta hud_panel_engineinfo_framecounter_time "0.1" "time between framerate display updates"

seta hud_panel_physics_acceleration_movingaverage "1" "use an averaging method for calculating acceleration instead of the real value. lower (positive) values update the acceleration quicker"
seta hud_panel_physics_acceleration_max_slick "-1" "acceleration progressbar gets completely filled up by this value (in g) while on slick; \"-1\" = same as the normal max"
seta hud_panel_physics_update_interval "0.015625" "how often (in seconds) numeric values get updated on screen"
seta hud_panel_physics_jumpspeed "0" "also show jump speed, replacing the speed unit text (NOTE: ignores vertical speed)"
seta hud_panel_physics_jumpspeed_time "1" "how many seconds the jumpspeed text takes to fade out"
seta hud_panel_physics_force_layout "0" "\"1\" = force speed and acceleration to be side-by-side, \"2\" = force them to be above one another"

seta hud_panel_itemstime_progressbar_maxtime "30" "when left time is at least this amount, the status bar is full"
seta hud_panel_itemstime_hidespawned "1" "\"1\" = hide an item from the panel when all the occurrences of it are available again, \"2\" = hide it when at least one occurrence is available again"
seta hud_panel_itemstime_hidebig "0" "hide big armor and health from the panel"

set _hud_panel_quickmenu_file_from_server "" "reserved cvar set by the server with a custom server quickmenu file that appears in the default quickmenu"
seta hud_panel_quickmenu_file "" "load the quick menu from this file (\"\" or \"0\" to disable)"
seta hud_panel_quickmenu_translatecommands 0 "when the game is translated, translate strings inside commands too (useful for chat commands)"
seta hud_panel_quickmenu_time 5 "quickmenu expires after this number of seconds in the same page"
// do not remember this setting
set hud_panel_quickmenu_server_is_default 0 "make the server's custom quickmenu the default one"

seta hud_panel_infomessages_group0 1 "show group 0 messages (showing keys for non-crucial actions you can do while spectating/observing)"
seta hud_panel_infomessages_group_time 6 "number of seconds a message of a group lasts before it gets changed"
seta hud_panel_infomessages_group_fadetime 0.4 "group message fade in/out time"

seta hud_panel_centerprint_time 3 "message duration (NOTE: certain messages have a fixed duration)"
seta hud_panel_centerprint_fade_in 0 "how long a message takes to fade in"
seta hud_panel_centerprint_fade_out 0.15 "how long a message takes to fade out (this time is included in the message duration and can't be > 5)"
seta hud_panel_centerprint_fade_subsequent 1 "enable extra fading effects for each additional message, so that the more messages you have the more they become faded out"
seta hud_panel_centerprint_fade_subsequent_passone 3 "division factor for the first pass for alpha fading, with 2 all messages after the first have half alpha"
seta hud_panel_centerprint_fade_subsequent_passone_minalpha 0.5 "minimum factor that the first pass can fade to"
seta hud_panel_centerprint_fade_subsequent_passtwo 10 "division factor for the second pass for alpha fading, it applies another fade on top of the first pass to make it more transitioned"
seta hud_panel_centerprint_fade_subsequent_passtwo_minalpha 0.5 "minimum factor that the second pass can fade to"
seta hud_panel_centerprint_fade_minfontsize 1 "minimum factor for the font size from the fading in/out effects"

seta hud_panel_scoreboard_namesize 15 "size limit of player names and relative column (multiplied by fontsize)"
seta hud_panel_scoreboard_maxheight 0.6 "max height of the scoreboard; a few players that wouldn't fit into the scoreboard are listed in the last row"
seta hud_panel_scoreboard_others_showscore 1 "show scores of players listed in the last row when the scoreboard reaches the max height"
seta hud_panel_scoreboard_spectators_showping 1 "show ping of spectators"
seta hud_panel_scoreboard_spectators_aligned 0 "align spectators in columns"
seta hud_panel_scoreboard_spectators_position 1 "spectator list position; \"0\" = before accuracy and itemstats, \"1\" = before rankings, \"2\" = after rankings, \"3\" = after map stats"
seta hud_panel_scoreboard_minwidth 0.6 "minimum width of the scoreboard"
seta hud_panel_scoreboard_table_fieldtitle_maxwidth 0.07 "max width of a field title; if the title is longer it will be shown compressed"
seta hud_panel_scoreboard_team_size_position 0 "where to show the team size; will move team scores to the other side if necessary; \"0\" = do not show, \"1\" = left of scoreboard, \"2\" = right of scoreboard"
seta hud_panel_scoreboard_ping_best 0 "use best_color for this ping"
seta hud_panel_scoreboard_ping_medium 70 "use medium_color for this ping"
seta hud_panel_scoreboard_ping_high 100 "use high_color for this ping"
seta hud_panel_scoreboard_ping_worst 150 "use worst_color for this ping"
seta hud_panel_scoreboard_ping_best_color "0 1 0" "color for best ping"
seta hud_panel_scoreboard_ping_medium_color "1 1 0" "color for medium ping"
seta hud_panel_scoreboard_ping_high_color "1 0.5 0" "color for high ping"
seta hud_panel_scoreboard_ping_worst_color "1 0 0" "color for worst ping"
seta hud_panel_scoreboard_playerid 0 "show player id (server entity number) next to player's name"
seta hud_panel_scoreboard_playerid_prefix "#" "player id prefix"
seta hud_panel_scoreboard_playerid_suffix " " "player id suffix"
seta hud_panel_scoreboard_scores_per_round "0" "show average scores per round"

seta hud_panel_scoreboard_accuracy_showdelay 2 "how long to delay displaying accuracy below the scoreboard if it's too far down"
seta hud_panel_scoreboard_accuracy_showdelay_minpos 0.75 "delay displaying the accuracy panel only if its position is lower than this percentage of the screen height from the top"

seta hud_panel_scoreboard_itemstats_filter 1 "filter out less interesting items (according to hud_panel_scoreboard_itemstats_filter_mask)"
seta hud_panel_scoreboard_itemstats_filter_mask 12 "format [0-1][0-4]; the tens digit filters out all ammo items if set to \"1\", the units digit filters out health/armor items, \"1\" = small, \"2\" = medium too, \"3\" = big too, \"4\" = mega too"
seta hud_panel_scoreboard_itemstats_showdelay 2.2 "how long to delay displaying item stats below the scoreboard if it's too far down"
seta hud_panel_scoreboard_itemstats_showdelay_minpos 0.75 "delay displaying the item stats panel only if its position is lower than this percentage of the screen height from the top"

seta _hud_panel_strafehud_demo "0" "StrafeHUD changes angle during configure"
seta hud_panel_strafehud_mode "0" "StrafeHUD mode which controls whether the StrafeHUD is centered at \"0\" = view angle, \"1\" = velocity angle"
seta hud_panel_strafehud_range "90" "the angle range up to 360 degrees displayed on the StrafeHUD; \"-1\" = current fov, \"0\" = dynamic (chooses the minimum range required to still see the whole area needed for accelerating)"
seta hud_panel_strafehud_range_sidestrafe "-2" "the angle range up to 360 degrees displayed on the StrafeHUD when side strafing, \"0\" = dynamic (chooses the minimum range required to still see the whole area needed for accelerating), \"-1\" = current fov, \"-2\" = same as the normal range"
seta hud_panel_strafehud_style "2" "\"0\" = no styling, \"1\" = progress bar style for the strafe bar, \"2\" = accelerated gradient for the strafe bar (no nonlinear projection for gradient color/opacity), \"3\" = software gradient for the strafe bar (slow)"
seta hud_panel_strafehud_unit_show "1" "show units"
seta hud_panel_strafehud_onground_mode "2" "handling of landing at speeds where friction is higher than optimal acceleration; \"0\" = fill the whole HUD with overturn, \"1\" = show zones regardless, \"2\" = show the zones as if airborne (useful for quake2 and quake3 physics)"
seta hud_panel_strafehud_onground_friction "1" "account for friction in calculations"
seta hud_panel_strafehud_bar_preaccel "1" "extend the acceleration zone by the strafe meter zone before full acceleration can be achieved"
seta hud_panel_strafehud_bar_preaccel_color "0 1 0" "color of the strafe meter pre-acceleration zone"
seta hud_panel_strafehud_bar_preaccel_alpha "0.5" "opacity of the strafe meter pre-acceleration zone"
seta hud_panel_strafehud_bar_neutral_color "1 1 1" "color of the strafe meter neutral zone"
seta hud_panel_strafehud_bar_neutral_alpha "0.1" "opacity of the strafe meter neutral zone"
seta hud_panel_strafehud_bar_accel_color "0 1 0" "color of the strafe meter acceleration zone"
seta hud_panel_strafehud_bar_accel_alpha "0.5" "opacity of the strafe meter acceleration zone"
seta hud_panel_strafehud_bar_overturn_color "1 0 1" "color of the strafe meter overturn zone"
seta hud_panel_strafehud_bar_overturn_alpha "0.5" "opacity of the strafe meter overturn zone"
seta hud_panel_strafehud_angle_alpha "0.8" "opacity of the indicator showing the player's current angle"
seta hud_panel_strafehud_angle_preaccel_color "0 1 1" "color of the indicator showing the player's current angle if it is within the pre-acceleration zone"
seta hud_panel_strafehud_angle_neutral_color "1 1 0" "color of the indicator showing the player's current angle if it is within the neutral zone"
seta hud_panel_strafehud_angle_accel_color "0 1 1" "color of the indicator showing the player's current angle if it is within the acceleration zone"
seta hud_panel_strafehud_angle_overturn_color "1 0 1" "color of the indicator showing the player's current angle if it is within the overturn zone"
seta hud_panel_strafehud_angle_line "0" "defines the number of dashes of the indicator line showing the player's current angle; \"0\" = no line, \"1\" = solid line"
seta hud_panel_strafehud_angle_line_width "0.001" "width of the indicator line showing the player's current angle (relative to the panel width)"
seta hud_panel_strafehud_angle_line_height "1" "height of the indicator line showing the player's current angle (relative to the panel height)"
seta hud_panel_strafehud_angle_arrow "1" "arrow style of the angle indicator showing the player's current angle; \"0\" = none, \"1\" = top, \"2\" = bottom, \"3\" = both"
seta hud_panel_strafehud_angle_arrow_size "0.5" "arrow size of the indicator showing the player's current angle (relative to the panel height)"
seta hud_panel_strafehud_bestangle "1" "\"1\" = enable a ghost angle indicator showing the best angle to gain maximum acceleration, \"2\" = only when side strafing"
seta hud_panel_strafehud_bestangle_color "1 1 1" "color of the indicator showing the best angle to gain maximum acceleration"
seta hud_panel_strafehud_bestangle_alpha "0.5" "opacity of the indicator showing the best angle to gain maximum acceleration"
seta hud_panel_strafehud_bestangle_line "0" "defines the number of dashes of the best angle indicator line; \"0\" = no line, \"1\" = solid line"
seta hud_panel_strafehud_bestangle_line_width "0.001" "width of the best angle indicator line (relative to the panel width)"
seta hud_panel_strafehud_bestangle_line_height "1" "height of the best angle indicator line (relative to the panel height)"
seta hud_panel_strafehud_bestangle_arrow "1" "arrow style of the best angle indicator; \"0\" = none, \"1\" = top, \"2\" = bottom, \"3\" = both"
seta hud_panel_strafehud_bestangle_arrow_size "0.5" "arrow size of the best angle indicator (relative to the panel height)"
seta hud_panel_strafehud_switch "1" "\"1\" = enable the strafe angle indicator showing the angle to move to when changing side, \"2\" = show the normal switch indicators when W-turning, \"3\" = also while side strafing"
seta hud_panel_strafehud_switch_minspeed "-1" "minimum speed in qu/s at which angle indicator(s) which are used to aid changing strafe direction will be shown; \"-1\" = dynamic"
seta hud_panel_strafehud_switch_color "1 1 0" "color of the strafe angle indicators for changing strafe direction"
seta hud_panel_strafehud_switch_alpha "0.5" "opacity of the strafe angle indicators for changing strafe direction"
seta hud_panel_strafehud_switch_line "0" "defines the number of dashes of the change angle indicator line; \"0\" = no line, \"1\" = solid line"
seta hud_panel_strafehud_switch_line_width "0.001" "width of the change angle indicator line (relative to the panel width)"
seta hud_panel_strafehud_switch_line_height "1" "height of the change angle indicator line (relative to the panel height)"
seta hud_panel_strafehud_switch_arrow "1" "arrow style of the change angle indicator; \"0\" = none, \"1\" = top, \"2\" = bottom, \"3\" = both"
seta hud_panel_strafehud_switch_arrow_size "0.5" "arrow size of the change angle indicator (relative to the panel height)"
seta hud_panel_strafehud_wturn "1" "enable W-turn indicators showing the angle to rotate your velocity as fast as possible; \"1\" = only if W-turning, \"2\" = also while strafing normally, \"3\" = also while side strafing"
seta hud_panel_strafehud_wturn_color "0 0 1" "color of the W-turn indicators"
seta hud_panel_strafehud_wturn_alpha "0.5" "opacity of the W-turn indicators"
seta hud_panel_strafehud_wturn_proper "0" "use the proper formula to calculate W-turn indicators (WARNING: loses accuracy at high speeds)"
seta hud_panel_strafehud_wturn_unrestricted "0" "enable W-turn indicators even when W-turning gives acceleration (WARNING: not completely accurate)"
seta hud_panel_strafehud_wturn_line "0" "defines the number of dashes of the W-turn angle indicator line; \"0\" = no line, \"1\" = solid line"
seta hud_panel_strafehud_wturn_line_width "0.001" "width of the W-turn angle indicator line (relative to the panel width)"
seta hud_panel_strafehud_wturn_line_height "1" "height of the W-turn angle indicator line (relative to the panel height)"
seta hud_panel_strafehud_wturn_arrow "1" "arrow style of the W-turn angle indicator; \"0\" = none, \"1\" = top, \"2\" = bottom, \"3\" = both"
seta hud_panel_strafehud_wturn_arrow_size "0.5" "arrow size of the W-turn angle indicator (relative to the panel height)"
seta hud_panel_strafehud_direction "0" "enable direction caps to see in which direction you are currently strafing"
seta hud_panel_strafehud_direction_color "0 0.5 1" "color of the direction caps which indicate the direction the player is currently strafing towards"
seta hud_panel_strafehud_direction_alpha "1" "opacity of the direction caps which indicate the direction the player is currently strafing towards"
seta hud_panel_strafehud_direction_width "0.25" "stroke width of the direction caps which indicate the direction the player is currently strafing towards (relative to the panel height)"
seta hud_panel_strafehud_direction_length "0.02" "length of the horizontal component of the direction caps which indicate the direction the player is currently strafing towards (relative to the panel width)"
seta hud_panel_strafehud_slickdetector "1" "enable the slick detector which notifies you if there is slick near you"
seta hud_panel_strafehud_slickdetector_range "200" "range of the slick detector (in qu)"
seta hud_panel_strafehud_slickdetector_granularity "1" "value from 0 to 4 which defines how exact the search for slick should be, higher values may yield better results but require more computation"
seta hud_panel_strafehud_slickdetector_color "0 1 1" "color of the slick detector indicator"
seta hud_panel_strafehud_slickdetector_alpha "0.5" "opacity of the slick detector indicator"
seta hud_panel_strafehud_slickdetector_height "0.125" "height of the slick detector indicator (relative to the panel height)"
seta hud_panel_strafehud_startspeed "1" "enable the start speed indicator which shows you the speed you had while passing the start trigger of a race map"
seta hud_panel_strafehud_startspeed_fade "4" "fade time (in seconds) of the start speed text"
seta hud_panel_strafehud_startspeed_color "1 0.75 0" "color of the start speed text"
seta hud_panel_strafehud_startspeed_pos "0 -1" "position of the start speed text (relative to the panel), the Y coordinate must be <= -1 (below) or >= 1 (above) the panel"
seta hud_panel_strafehud_startspeed_size "1.5" "size of the start speed text (relative to the panel height)"
seta hud_panel_strafehud_jumpheight "0" "enable the jump height indicator which tells you how high you jumped"
seta hud_panel_strafehud_jumpheight_fade "4" "fade time (in seconds) of the jump height text"
seta hud_panel_strafehud_jumpheight_min "50" "minimum jump height to display in the selected unit"
seta hud_panel_strafehud_jumpheight_color "0 1 0.75" "color of the jump height text"
seta hud_panel_strafehud_jumpheight_pos "0 -2" "position of the jump height text (relative to the panel), the Y coordinate must be <= -1 (below) or >= 1 (above) the panel"
seta hud_panel_strafehud_jumpheight_size "1.5" "size of the jump height text (relative to the panel height)"
seta hud_panel_strafehud_timeout_ground "0.1" "time (in seconds) after take off before changing to air strafe physics when not jumping (visually more consistent HUD while on downwards slick ramps)"
seta hud_panel_strafehud_timeout_turn "0.1" "time (in seconds) after releasing the strafe keys before changing mode (visually more consistent HUD while switching between left/right strafe turning)"
seta hud_panel_strafehud_antiflicker_angle "0.01" "how many degrees from 0° to 180° the HUD ignores if it could cause visual disturbances otherwise (and to counter rounding errors)"
seta hud_panel_strafehud_fps_update "0.5" "update interval (in seconds) of the frametime to calculate the optimal angle, smaller values may cause flickering"
seta hud_panel_strafehud_sonar "0" "\"1\" = enable the strafe sonar"
seta hud_panel_strafehud_sonar_audio "misc/talk" "audio to play for sonar"
seta hud_panel_strafehud_sonar_start "0.5" "how optimal from 0 to 1 your strafing angle has to be for the strafe sonar to activate"
seta hud_panel_strafehud_sonar_interval_start "0.333333" "strafe sonar sound interval in seconds"
seta hud_panel_strafehud_sonar_interval_range "-0.222222" "dynamic sound interval range in seconds of the strafe sonar as you approach the optimal angle"
seta hud_panel_strafehud_sonar_interval_exponent "1" "exponent of the dynamic sound interval range of the strafe sonar"
seta hud_panel_strafehud_sonar_volume_start "0.333333" "sound volume of the strafe sonar"
seta hud_panel_strafehud_sonar_volume_range "0.666666" "dynamic volume range of the strafe sonar as you approach the optimal angle"
seta hud_panel_strafehud_sonar_volume_exponent "1" "exponent of the dynamic volume range of the strafe sonar"
seta hud_panel_strafehud_sonar_pitch_start "0.9" "playback speed of the strafe sonar"
seta hud_panel_strafehud_sonar_pitch_range "0.1" "dynamic playback speed range of the strafe sonar as you approach the optimal angle"
seta hud_panel_strafehud_sonar_pitch_exponent "1" "exponent of the dynamic playback speed range of the strafe sonar"
seta hud_panel_strafehud_vangle "0" "\"1\" = enable the vertical angle indicator"
seta hud_panel_strafehud_vangle_color "0.75 0.75 0.75" "color of the vertical angle text"
seta hud_panel_strafehud_vangle_pos "-0.25 1" "position of the vertical angle text (relative to the panel), the Y coordinate must be <= -1 (below) or >= 1 (above) the panel"
seta hud_panel_strafehud_vangle_size "1" "size of the vertical angle text (relative to the panel height)"
seta hud_panel_strafehud_strafeefficiency "0" "\"1\" = enable the strafe efficiency indicator"
seta hud_panel_strafehud_strafeefficiency_pos "0.25 1" "position of the strafe efficiency text (relative to the panel), the Y coordinate must be <= -1 (below) or >= 1 (above) the panel"
seta hud_panel_strafehud_strafeefficiency_size "1" "size of the strafe efficiency text (relative to the panel height)"
seta hud_panel_strafehud_projection "0" "StrafeHUD projection mode; \"0\" = linear, \"1\" = perspective, \"2\" = panoramic"

// HUD panel aliases
alias quickmenu "cl_cmd hud quickmenu ${* ?}"

alias hud_panel_radar_rotate "toggle hud_panel_radar_rotation 0 1 2 3 4"
alias +hud_panel_radar_maximized "cl_cmd hud radar 1"
alias -hud_panel_radar_maximized "cl_cmd hud radar 0"
alias hud_panel_radar_maximized "cl_cmd hud radar"

// other HUD cvars
seta hud_panel_update_interval 2 "how often (in seconds) common panel cvars are reloaded"

seta hud_dynamic_follow 0 "HUD moves around following player's movement (effect shared with cl_followmodel, can be enabled independently from it though)"
seta hud_dynamic_follow_scale 0.01 "HUD following scale"
seta hud_dynamic_follow_scale_xyz "1 1 1" "HUD following scale for the X, Y, and Z-axes"

seta hud_dynamic_shake 1 "shake the HUD when hurt"
seta hud_dynamic_shake_damage_max 130 "damage value at which the HUD shake effect is maximum"
seta hud_dynamic_shake_damage_min 10 "damage value at which the HUD shake effect is minimum"
seta hud_dynamic_shake_scale 0.2 "HUD shake scale"

seta hud_showbinds 1	"what to show in the HUD to indicate certain keys to press; \"0\" = display commands, \"1\" = bound keys, \"2\" = both"
seta hud_showbinds_limit 2	"maximum number of bound keys to show for a command; \"0\" = unlimited"
set _hud_showbinds_reload 0	"set to \"1\" to reload binds if you changed any. it is reset to \"0\" automatically"

seta hud_colorflash_alpha 0.5 "starting alpha of the color flash"

seta hud_damage 0.55 "draw a blood image when hurt (improved version of gl_polyblend)"
seta hud_damage_blur 0 "use postprocessing to blur the screen when you have taken damage. this can be paired with current HUD damage or just used alone. higher values mean more blur"
seta hud_damage_blur_alpha 0.5 "amount of alpha to use when merging the blurred layers back into the render. turning this up higher will remove bloom, so it's best to find a balance"
seta hud_damage_gentle_alpha_multiplier 0.10 "how much to multiply alpha of flash when using the cl_gentle version, it's much more opaque than the non-gentle version"
seta hud_damage_gentle_color "1 0.7 1" "color of flash for cl_gentle version"
seta hud_damage_color "1 0 0" "color of flash"
seta hud_damage_factor 0.025 "(damage * factor); how much to add to the alpha value"
seta hud_damage_fade_rate 0.75 "how much to subtract from the alpha value each second"
seta hud_damage_maxalpha 1.5 "how much to limit the alpha value to"
seta hud_damage_pain_threshold 0.1 "how much alpha to ignore (must be bigger than the hud_damage_factor so that e.g. rot is ignored)"
seta hud_damage_pain_threshold_lower 1.25 "how much we lower pain_threshold with when nearing 0 health (if pain_threshold gets negative then we always draw a flash at alpha == fabs(pain_threshold))"
seta hud_damage_pain_threshold_lower_health 50 "at which health we start lowering pain_threshold"
seta hud_damage_pain_threshold_pulsating_min 0.6 "minimum value when calculating the pulse; max(pulsating_min, fabs(sin(PI * time / period)))"
seta hud_damage_pain_threshold_pulsating_period 0.8 "one pulse every X seconds"

seta hud_powerup 0 "power of the sharpen effect when owning the Shield or Strength powerups"

seta hud_postprocessing 1 "enables the ability for effects such as hud_damage_blur and hud_contents to apply a postprocessing method upon the screen; enabling this disables manual editing of the postprocess cvars"
seta hud_postprocessing_maxbluralpha 0 "maximum alpha which the blur postprocess can be"
seta hud_postprocessing_maxblurradius 8 "maximum radius which the blur postprocess can be"

seta hud_contents 1 "an improved version of gl_polyblend for liquids such as water/lava/slime, draw a filler when inside the liquid"
seta hud_contents_blur 10 "use postprocessing to blur the screen when you are inside a liquid. higher values mean more blur"
seta hud_contents_blur_alpha 0.5 "amount of alpha to use when merging the blurred layers back into the render. turning this up higher will remove bloom, so it's best to find a balance"
seta hud_contents_factor 1 "factor at which to multiply the current faded value"
seta hud_contents_fadeintime 0.02 "factor of time it takes for the alpha level to reach normal value when entering the liquid"
seta hud_contents_fadeouttime 0.1 "factor of time it takes for the alpha level to reach normal value when leaving the liquid"
seta hud_contents_lava_alpha 0.7 "alpha of the lava"
seta hud_contents_lava_color "0.8 0.1 0" "color blend when inside lava"
seta hud_contents_slime_alpha 0.7 "alpha of the slime"
seta hud_contents_slime_color "0 0.4 0.1" "color blend when inside slime"
seta hud_contents_water_alpha 0.5 "alpha of the water"
seta hud_contents_water_color "0.4 0.3 0.3" "color blend when inside water"

seta hud_shownames 1 "draw names and health/armor of nearby players"
seta hud_shownames_enemies 1 "show tags for enemies as well"
seta hud_shownames_crosshairdistance 0 "if set, only draw tags which came within this distance of your crosshair (\"25\" recommended)"
seta hud_shownames_crosshairdistance_time 5 "how many seconds the tag is still visible after pointing at them"
seta hud_shownames_crosshairdistance_antioverlap 0 "allow antioverlap to work as normal even with crosshairdistance on"
seta hud_shownames_self 0 "also include your own name to be shown when third person camera mode is on (chase_active/cl_eventchase)"
seta hud_shownames_status 1 "draw health/armor status of teammates"
seta hud_shownames_statusbar_height 4 "height of nametag status bar"
seta hud_shownames_statusbar_highlight 1 "always highlight values of health and armor from 0 to half status bar"
seta hud_shownames_aspect 8 "aspect ratio of total drawing area per name"
seta hud_shownames_fontsize 12 "nametag font size"
seta hud_shownames_decolorize 1 "\"1\" = decolorize name in team games, \"2\" = decolorize always"
seta hud_shownames_alpha 0.7 "nametag alpha"
seta hud_shownames_resize 1 "enable resizing of the names, then the size cvars will correspond to the maximum size"
seta hud_shownames_mindistance 1000 "start fading nametag alpha/size at this distance"
seta hud_shownames_maxdistance 5000 "nametag alpha/size is 0 at this distance"
seta hud_shownames_antioverlap 1 "if two tags overlap, fade out the one further away from you"
seta hud_shownames_antioverlap_minalpha 0.4 "fade out overlapping tags to this alpha value"
seta hud_shownames_offset 52 "offset (along the Z-axis) tag from player origin by this many units"

seta hud_panel_pickup_showtimer 1 "\"0\" = hide timer, \"1\" = show timer, \"2\" = only when spectating"
seta hud_panel_pickup_iconsize 1.5 "icon size scale"
seta hud_panel_pickup_time 3 "pickup message duration (can't be higher than 5)"
seta hud_panel_pickup_fade_out 0.15 "how long a pickup message takes to fade out (this time is included in the message duration)"