将襟翼控制在设定值附近, 相当于增加一个额外的襟翼档位, 比如给你的喷火加上一个作战档.
如果需要改变设定值, 打开 .config.csv 修改.
目前只支持 Windows
欢迎 issues 和 pull requests
打开 terminal, 或者 powershell 或 cmd (以下称终端),
run:
pip install -r requirements.txt
在终端中运行:
python ./autoflap.py
- 按
Ctrl-c
- under `working', very very fast concequtive of pause would stuck after going to sleep after testing, its because of the 3 presses of r
- the keyboard module will make program slower when pressing f/r, maybe because it will block main thread execution, or its because the underlying sending mechanism will block execution
- make 'print messages' more readable, like "in flight * 3"
- 把要处于的稳定襟翼值显示在屏幕上
- 语音提示有没有捕捉到Pause
- 为不同机型提供预设值