namelist_definition_drv.xml

<?xml version="1.0"?>

<?xml-stylesheet type="text/xsl" href="namelist_definition.xsl"?>

<entry_id version="2.0">

  <!-- ======================================== -->
  <!--  DRIVER attributes                       -->
  <!-- ======================================== -->

  <entry id="Verbosity@driver_attributes" modify_via_xml="ESMF_VERBOSITY_LEVEL">
    <type>char</type>
    <category>nuopc</category>
    <group>DRIVER_attributes</group>
    <valid_values>off,low,high,max</valid_values>
    <values>
      <value>$ESMF_VERBOSITY_LEVEL</value>
    </values>
  </entry>

  <entry id="pio_asyncio_ntasks" modify_via_xml="PIO_ASYNCIO_NTASKS">
    <type>integer</type>
    <category>pio</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      IO tasks FOR ASYNC IO, only valid if ASYNCIO is true.
    </desc>
    <values>
      <value>$PIO_ASYNCIO_NTASKS</value>
    </values>
  </entry>

  <entry id="pio_asyncio_stride" modify_via_xml="PIO_ASYNCIO_STRIDE">
    <type>integer</type>
    <category>pio</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      IO task stride FOR ASYNC IO, only valid if ASYNCIO is true.
    </desc>
    <values>
      <value>$PIO_ASYNCIO_STRIDE</value>
    </values>
  </entry>

  <entry id="pio_asyncio_rootpe" modify_via_xml="PIO_ASYNCIO_ROOTPE">
    <type>integer</type>
    <category>pio</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      IO rootpe task FOR ASYNC IO, only valid if ASYNCIO is true.
    </desc>
    <values>
      <value>$PIO_ASYNCIO_ROOTPE</value>
    </values>
  </entry>

  <entry id="cime_model" modify_via_xml="CIME_MODEL">
    <type>char</type>
    <category>expdef</category>
    <group>DRIVER_attributes</group>
    <valid_values>cesm</valid_values>
    <desc>cime model</desc>
    <values>
      <value>cesm</value>
    </values>
  </entry>

  <entry id="timing_dir">
    <type>char</type>
    <category>expdef</category>
    <group>DRIVER_attributes</group>
    <desc>
      location of timing output.
    </desc>
    <values>
      <value>./timing</value>
    </values>
  </entry>

  <entry id="tchkpt_dir">
    <type>char</type>
    <category>expdef</category>
    <group>DRIVER_attributes</group>
    <desc>
      location of timing checkpoint output.
    </desc>
    <values>
      <value>./timing/checkpoints</value>
    </values>
  </entry>

  <entry id="reprosum_use_ddpdd">
    <type>logical</type>
    <category>reprosum</category>
    <group>DRIVER_attributes</group>
    <desc>
      Use faster method for reprosum, but one where reproducibility is not always guaranteed.
      default: .false.
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="reprosum_diffmax">
    <type>real</type>
    <category>reprosum</category>
    <group>DRIVER_attributes</group>
    <desc>
      Tolerance for relative error
      default: -1.0e-8
    </desc>
    <values>
      <value>-1.0e-8</value>
    </values>
  </entry>
  <entry id="reprosum_recompute">
    <type>logical</type>
    <category>reprosum</category>
    <group>DRIVER_attributes</group>
    <desc>
      Recompute with non-scalable algorithm if reprosum_diffmax is exceeded.
      default: .false.
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>

  <entry id="logFilePostFix">
    <type>char</type>
    <category>expdef</category>
    <group>DRIVER_attributes</group>
    <desc>
      Ending suffix "postfix" for output log files.
    </desc>
    <values>
      <value>.log</value>
    </values>
  </entry>

  <entry id="outPathRoot">
    <type>char</type>
    <category>expdef</category>
    <group>DRIVER_attributes</group>
    <desc>
      Root for output log files.
    </desc>
    <values>
      <value>./</value>
    </values>
  </entry>

  <entry id="component_list">
    <type>char</type>
    <category>nuopc</category>
    <group>nuopc_var</group>
    <desc>
      Model components that are active
    </desc>
    <values>
      <value>ATM OCN ICE LND ROF GLC WAV MED</value>
    </values>
  </entry>

 <entry id="drv_restart_pointer">
    <type>char</type>
    <category>expdef</category>
    <group>DRIVER_attributes</group>
    <desc>
      Driver restart pointer file to initialize time info
    </desc>
    <values>
      <value>rpointer.cpl</value>
    </values>
  </entry>

  <entry id="wv_sat_scheme">
    <type>char</type>
    <category>wv_sat</category>
    <group>DRIVER_attributes</group>
    <valid_values>GoffGratch,MurphyKoop,Bolton,Flatau</valid_values>
    <desc>
      Type of water vapor saturation vapor pressure scheme employed. 'GoffGratch' for
      Goff and Gratch (1946); 'MurphyKoop' for Murphy and Koop (2005); 'Bolton' for
      Bolton (1980); 'Flatau' for Flatau, Walko, and Cotton (1992).
      Default: GoffGratch
    </desc>
    <values>
      <value>GoffGratch</value>
    </values>
  </entry>
  <entry id="wv_sat_transition_start">
    <type>real</type>
    <category>wv_sat</category>
    <group>DRIVER_attributes</group>
    <desc>
      Width of the liquid-ice transition range in mixed-phase water saturation vapor
      pressure calculations. The range always ends at 0 degrees Celsius, so this
      variable only affects the start of the transition.
      Default: 20K
      WARNING: CAM is tuned to the default value of this variable. Because it affects
      so many different parameterizations, changes to this variable may require a
      significant retuning of CAM's cloud physics to give reasonable results.
    </desc>
    <values>
      <value>20.0D0</value>
    </values>
  </entry>
  <entry id="wv_sat_use_tables">
    <type>logical</type>
    <category>wv_sat</category>
    <group>DRIVER_attributes</group>
    <desc>
      Whether or not to produce lookup tables at init time to use as a cache for
      saturation vapor pressure.
      Default: .false.
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="wv_sat_table_spacing">
    <type>real</type>
    <category>wv_sat</category>
    <group>DRIVER_attributes</group>
    <desc>
      Temperature resolution of saturation vapor pressure lookup tables in Kelvin.
      (This is only used if wv_sat_use_tables is .true.)
      Default: 1.0
    </desc>
    <values>
      <value>1.0D0</value>
    </values>
  </entry>

  <!-- =========================================== -->
  <!-- All components orbital attributes           -->
  <!-- =========================================== -->

  <entry id="write_restart_at_endofrun">
    <type>logical</type>
    <category>nuopc</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value>.false.</value>
      <value rest_option="end">.true.</value>
    </values>
  </entry>

  <entry id="Profiling" modify_via_xml="ESMF_PROFILING_LEVEL">
    <type>char</type>
    <category>nuopc</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value>$ESMF_PROFILING_LEVEL</value>
    </values>
  </entry>

  <entry id="orb_mode">
    <type>char</type>
    <category>orbital</category>
    <group>ALLCOMP_attributes</group>
    <valid_values>fixed_year,variable_year,fixed_parameters</valid_values>
    <desc>
      orbital model setting.  this sets how the orbital mode will be
      configured.
      "fixed_year" uses the orb_iyear and other orb inputs are ignored.  In
      this mode, the orbital parameters are constant and based on the year.
      "variable_year" uses the orb_iyear and orb_iyear_align.  In this mode,
      the orbital parameters vary as the model year advances and the model
      year orb_iyear_align has the equivalent orbital year of orb_iyear.
      "fixed_parameters" uses the orb_eccen, orb_mvelp, and orb_obliq to set
      the orbital parameters which then remain constant through the model
      integration. [fixed_year, variable_year, fixed_parameters]  (default: 'fixed_year'.)
    </desc>
    <values>
      <value>fixed_year</value>
      <value iyear='HIST'>variable_year</value>
    </values>
  </entry>

  <entry id="orb_iyear_align">
    <type>integer</type>
    <category>orbital</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      model year associated with orb_iyear when orb_mode is variable_year. (default: 1990)
    </desc>
    <values>
      <value>1990</value>
      <value iyear="1850">1850</value>
      <value iyear="2000">2000</value>
      <value iyear='HIST'>1850</value>
    </values>
  </entry>

  <entry id="orb_iyear">
    <type>integer</type>
    <category>orbital</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      year of orbit, used when orb_mode is fixed_year or variable_year. (default: 1990)
    </desc>
    <values>
      <value>1990</value>
      <value iyear="1850">1850</value>
      <value iyear="2000">2000</value>
      <value iyear='HIST'>1850</value>
    </values>
  </entry>

  <entry id="orb_eccen">
    <type>real</type>
    <category>orbital</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      eccentricity of orbit, used when orb_mode is fixed_parameters.
      default: SHR_ORB_UNDEF_REAL (1.e36) (Not currently used in build-namelist)
    </desc>
    <values>
      <value>1.e36</value>
    </values>
  </entry>

  <entry id="orb_mvelp">
    <type>real</type>
    <category>orbital</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      location of vernal equinox in longitude degrees, used when orb_mode is fixed_parameters.
      default: SHR_ORB_UNDEF_REAL (1.e36)(Not currently used in build-namelist)
    </desc>
    <values>
      <value>1.e36</value>
    </values>
  </entry>

  <entry id="orb_obliq">
    <type>real</type>
    <category>orbital</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      obliquity of orbit in degrees, used when orb_mode is fixed_parameters.
      default: SHR_ORB_UNDEF_REAL (1.e36) (Not currently used in build-namelist)
    </desc>
    <values>
      <value>1.e36</value>
    </values>
  </entry>

  <!-- =========================================== -->
  <!-- ALLCOMP general attributes                  -->
  <!-- =========================================== -->

  <entry id="MED_model">
    <type>char</type>
    <category>nuopc</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value cime_model="cesm">cesm</value>
    </values>
  </entry>
  <entry id="mesh_mask" modify_via_xml="MASK_MESH">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>ALLCOMP_attributes</group>
    <desc>
      MESH for model mask (used to create masks and fractions at run time if different than model mesh)
    </desc>
    <values>
      <value>$MASK_MESH</value>
      <value single_column='true'>null</value>
    </values>
  </entry>
  <entry id="ATM_model" modify_via_xml="COMP_ATM">
    <type>char</type>
    <category>nuopc</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value>$COMP_ATM</value>
    </values>
  </entry>
  <entry id="OCN_model" modify_via_xml="COMP_OCN">
    <type>char</type>
    <category>nuopc</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value>$COMP_OCN</value>
    </values>
  </entry>
  <entry id="ICE_model" modify_via_xml="COMP_ICE">
    <type>char</type>
    <category>nuopc</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value>$COMP_ICE</value>
    </values>
  </entry>
  <entry id="ROF_model" modify_via_xml="COMP_ROF">
    <type>char</type>
    <category>nuopc</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value>$COMP_ROF</value>
      <value ROF_MODE='null'>srof</value>
    </values>
  </entry>
  <entry id="LND_model" modify_via_xml="COMP_LND">
    <type>char</type>
    <category>nuopc</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value>$COMP_LND</value>
    </values>
  </entry>
  <entry id="GLC_model" modify_via_xml="COMP_GLC">
    <type>char</type>
    <category>nuopc</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value>$COMP_GLC</value>
    </values>
  </entry>
  <entry id="WAV_model" modify_via_xml="COMP_WAV">
    <type>char</type>
    <category>nuopc</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value>$COMP_WAV</value>
    </values>
  </entry>

  <entry id="mediator_present">
    <type>logical</type>
    <category>nuopc</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value>true</value>
    </values>
    <desc>if true, mediator is present in run </desc>
  </entry>

  <entry id="model_version">
    <type>char</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Model version
    </desc>
    <values>
      <value>unknown</value>
    </values>
  </entry>

  <entry id="start_type" modify_via_xml="RUN_TYPE">
    <type>char</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <valid_values>startup,branch,continue</valid_values>
    <desc>
      mode to start the run up, [startup,branch,continue],
      automatically derived from RUN_TYPE in env_run.xml
    </desc>
    <values>
      <value run_type="startup" continue_run=".false.">startup</value>
      <value run_type="hybrid"  continue_run=".false.">startup</value>
      <value run_type="branch"  continue_run=".false.">branch</value>
      <value run_type="startup" continue_run=".true.">continue</value>
      <value run_type="hybrid"  continue_run=".true.">continue</value>
      <value run_type="branch"  continue_run=".true.">continue</value>
    </values>
  </entry>

  <entry id="mediator_read_restart" skip_default_entry="true" modify_via_xml="MEDIATOR_READ_RESTART">
    <type>logical</type>
    <category>expdef</category>
    <group>DRIVER_attributes</group>
    <desc>
      only have the mediator reads the restart file regardless of start type
    </desc>
  </entry>

  <entry id="case_name" modify_via_xml="CASE">
    <type>char</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      case name.
    </desc>
    <values>
      <value>$CASE</value>
    </values>
  </entry>

  <entry id="case_desc" modify_via_xml="CASESTR">
    <type>char</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      case description.
    </desc>
    <values>
    <value>$CASESTR</value>
    </values>
  </entry>

  <entry id="model_doi_url" modify_via_xml="MODEL_DOI_URL">
    <type>char</type>
    <category>expdef</category>
    <group>seq_infodata_inparm</group>
    <desc>
      model doi url
    </desc>
    <values>
      <value>$MODEL_DOI_URL</value>
    </values>
  </entry>

  <entry id="username" modify_via_xml="USER">
    <type>char</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      username documentation
    </desc>
    <values>
      <value>$USER</value>
    </values>
  </entry>

  <entry id="hostname" modify_via_xml="MACH">
    <type>char</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      hostname information,
    </desc>
    <values>
      <value>$MACH</value>
    </values>
  </entry>

  <entry id="brnch_retain_casename" modify_via_xml="RUN_REFCASE">
    <type>logical</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Allow same branch casename as reference casename. If $CASE and $REFCASE are the same and the start_type is
      not startup, then the value of brnch_retain_casename is set to .true.
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>

  <entry id="scol_lat" modify_via_xml="PTS_LAT">
    <type>real</type>
    <category>single_column</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Latitude in degrees corresponding to the grid location
      in single column and single point modes.
    </desc>
    <values>
      <value>$PTS_LAT</value>
    </values>
  </entry>

  <entry id="scol_lon" modify_via_xml="PTS_LON">
    <type>real</type>
    <category>single_column</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Longitude in degrees corresponding to the grid location
      in single column and single point modes.
    </desc>
    <values>
      <value>$PTS_LON</value>
    </values>
  </entry>

  <entry id="single_column_lnd_domainfile" modify_via_xml="PTS_DOMAINFILE">
    <type>char</type>
    <category>single_column</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      DOMAIN file needed for single column model IF and only if
      a nearest neighbor search is done to match the PTS_LAT and PTS_LON
      to the closest point in the domain file. This file is ONLY used in
      single column mode.
    </desc>
    <values>
      <value>$PTS_DOMAINFILE</value>
    </values>
  </entry>

  <entry id="flds_i2o_per_cat" modify_via_xml="CPL_I2O_PER_CAT">
    <type>logical</type>
    <category>flds</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      .true. if select per ice thickness category fields are passed to the ocean.
      Set by the xml variable CPL_I2O_PER_CAT in env_run.xml
    </desc>
    <values>
      <value>$CPL_I2O_PER_CAT</value>
    </values>
  </entry>

  <entry id="ocn2glc_coupling">
    <type>logical</type>
    <category>flds</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      .true. if ocean sends fields at multiple ocean levels to the land-ice component
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>

  <entry id="tfreeze_option" modify_via_xml="TFREEZE_SALTWATER_OPTION">
    <type>char</type>
    <category>control</category>
    <group>ALLCOMP_attributes</group>
    <desc>Freezing point calculation for salt water.</desc>
    <values>
      <value>$TFREEZE_SALTWATER_OPTION</value>
    </values>
  </entry>

  <!-- =========================================== -->
  <!-- ALLCOMP atm/ocn fluxes attributes           -->
  <!-- =========================================== -->

  <entry id="flux_convergence">
    <type>real</type>
    <category>control</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Iterate atmocn flux calculation to this % difference
      Setting this to zero will always do flux_max_iteration
    </desc>
    <values>
      <value>0.01</value>
      <value atm_grid="0.9x1.25">0.0</value>
    </values>
  </entry>
  <entry id="flux_max_iteration">
    <type>integer</type>
    <category>control</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Iterate atmocn flux calculation a max of this value
    </desc>
    <values>
      <value>5</value>
    </values>
  </entry>
  <entry id="coldair_outbreak_mod">
    <type>logical</type>
    <category>control</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      if true use  Mahrt and Sun 1995,MWR modification to surface flux calculation
    </desc>
    <values>
      <value>.true.</value>
      <value atm_grid="T62">.false.</value>
      <value atm_grid="TL319">.false.</value>
    </values>
  </entry>

  <!-- =========================================== -->
  <!-- MED general attributes                      -->
  <!-- =========================================== -->

  <entry id="Verbosity@med_attributes" modify_via_xml="ESMF_VERBOSITY_LEVEL">
    <type>char</type>
    <category>nuopc</category>
    <group>MED_attributes</group>
    <valid_values>off,low,high,max</valid_values>
    <values>
      <value>$ESMF_VERBOSITY_LEVEL</value>
    </values>
  </entry>
  <entry id="check_for_nans">
    <type>logical</type>
    <category>performance</category>
    <group>MED_attributes</group>
    <desc>
      Check for NaN values in fields returned from mediator to components.  This has a small performance impact.
    </desc>
    <values>
      <value>.true.</value>
    </values>
  </entry>
  <entry id="atm_nx" modify_via_xml="ATM_NX">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of atm cells in i direction
    </desc>
    <values>
      <value>$ATM_NX</value>
    </values>
  </entry>
  <entry id="atm_ny" modify_via_xml="ATM_NY">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of atm cells in j direction
    </desc>
    <values>
      <value>$ATM_NY</value>
    </values>
  </entry>
  <entry id="ice_nx" modify_via_xml="ICE_NX">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of ice cells in i direction
    </desc>
    <values>
      <value>$ICE_NX</value>
    </values>
  </entry>
  <entry id="ice_ny" modify_via_xml="ICE_NY">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of ice cells in j direction
    </desc>
    <values>
      <value>$ICE_NY</value>
    </values>
  </entry>
  <entry id="lnd_nx" modify_via_xml="LND_NX">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of lnd cells in i direction
    </desc>
    <values>
      <value>$LND_NX</value>
    </values>
  </entry>
  <entry id="lnd_ny" modify_via_xml="LND_NY">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of lnd cells in j direction
    </desc>
    <values>
      <value>$LND_NY</value>
    </values>
  </entry>
  <entry id="ocn_nx" modify_via_xml="OCN_NX">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of ocn cells in i direction
    </desc>
    <values>
      <value>$OCN_NX</value>
    </values>
  </entry>
  <entry id="ocn_ny" modify_via_xml="OCN_NY">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of ocn cells in j direction
    </desc>
    <values>
      <value>$OCN_NY</value>
    </values>
  </entry>
  <entry id="rof_nx" modify_via_xml="ROF_NX">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of rof cells in i direction
    </desc>
    <values>
      <value>$ROF_NX</value>
    </values>
  </entry>
  <entry id="rof_ny" modify_via_xml="ROF_NY">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of rof cells in j direction
    </desc>
    <values>
      <value>$ROF_NY</value>
    </values>
  </entry>
  <entry id="wav_nx" modify_via_xml="WAV_NX">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of wav cells in i direction
    </desc>
    <values>
      <value>$WAV_NX</value>
    </values>
  </entry>
  <entry id="wav_ny" modify_via_xml="WAV_NY">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      number of wav cells in j direction
    </desc>
    <values>
      <value>$WAV_NY</value>
    </values>
  </entry>
  <entry id="coupling_mode" modify_via_xml="COUPLING_MODE">
    <type>char</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      Type of coupling mode to use in the mediator
    </desc>
    <values>
      <value>$COUPLING_MODE</value>
    </values>
  </entry>
  <entry id="glc_renormalize_smb">
    <type>char</type>
    <category>control</category>
    <group>MED_attributes</group>
    <valid_values>on,off,on_if_glc_coupled_fluxes</valid_values>
    <desc>
      Whether to renormalize the surface mass balance (smb) sent from lnd to glc so that the
      global integral on the glc grid agrees with the global integral on the lnd grid.

      Unlike most fluxes, smb is remapped with bilinear rather than conservative mapping weights,
      so this option is needed for conservation. However, conservation is not required in many
      cases, since we often run glc as a diagnostic (one-way-coupled) component.

      Allowable values are:
      'on': always do this renormalization
      'off': never do this renormalization (see WARNING below)
      'on_if_glc_coupled_fluxes': Determine at runtime whether to do this renormalization.
         Does the renormalization if we're running a two-way-coupled glc that sends fluxes
         to other components (which is the case where we need conservation).
         Does NOT do the renormalization if we're running a one-way-coupled glc, or if
         we're running a glc-only compset (T compsets).
         (In these cases, conservation is not important.)

      Only used if running with a prognostic GLC component.

      WARNING: Setting this to 'off' will break conservation when running with an
      evolving, two-way-coupled glc.
    </desc>
    <values>
      <value>on_if_glc_coupled_fluxes</value>
      <value COMP_LND="xlnd">off</value>
    </values>
  </entry>

  <entry id="info_debug" modify_via_xml="INFO_DBUG">
    <type>integer</type>
    <category>expdef</category>
    <group>MED_attributes</group>
    <desc>
      Level of debug output, 0=minimum, 1=normal, 2=more, 3=too much (default: 1)
    </desc>
    <values>
      <value>$INFO_DBUG</value>
    </values>
  </entry>

  <entry id="flux_albav" modify_via_xml="CPL_ALBAV">
    <type>logical</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      Only used for C,G compsets: if true, compute albedos to work with daily avg SW down
    </desc>
    <values>
      <value>$CPL_ALBAV</value>
    </values>
  </entry>

  <entry id="aoflux_grid">
    <type>char</type>
    <category>mapping</category>
    <group>MED_attributes</group>
    <valid_values>ogrid,agrid,xgrid</valid_values>
    <desc>
      Grid for atm ocn flux calc
      default: ogrid
    </desc>
    <values>
      <value>ogrid</value>
    </values>
  </entry>
  <entry id="ocn_surface_flux_scheme">
    <type>integer</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      atm/ocn flux calculation scheme
    </desc>
    <values>
      <value>0</value>
    </values>
  </entry>
  <entry id="gust_fac">
    <type>real</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      wind gustiness factor
    </desc>
    <values>
      <value>0.0D0</value>
    </values>
  </entry>

  <entry id="add_gusts">
    <type>logical</type>
    <category>control</category>
    <group>MED_attributes</group>
    <desc>
      add a wind gustiness factor
    </desc>
    <values>
      <value CAMDEV="True">.true.</value>
      <value CAMDEV="False">.false.</value>
    </values>
  </entry>

  <entry id="do_budgets" modify_via_xml="BUDGETS">
    <type>logical</type>
    <category>budget</category>
    <group>MED_attributes</group>
    <desc>
      logical that turns on diagnostic budgets, false means budgets will never be written
    </desc>
    <values>
      <value>$BUDGETS</value>
    </values>
  </entry>

  <entry id="budget_table_version">
    <type>char</type>
    <category>budget</category>
    <group>MED_attributes</group>
    <valid_values>v0,v1</valid_values>
    <desc>
      currently v0 refers to budgets using POP and v1 refers to budgets using MOM6
    </desc>
    <values>
      <value>v0</value>
      <value comp_ocn="mom">v1</value>
      <value comp_ocn="pop">v0</value>
    </values>
  </entry>

  <entry id="budget_inst">
    <type>integer</type>
    <category>budget</category>
    <group>MED_attributes</group>
    <valid_values>0,1,2,3</valid_values>
    <desc>
      sets the diagnotics level of the instantaneous budgets. [0,1,2,3],
      written only if BUDGETS variable is true
      0=none,
      1=+net summary budgets,
      2=+detailed lnd/ocn/ice component budgets,
      3=+detailed atm budgets
      default: 0
    </desc>
    <values>
      <value>0</value>
    </values>
  </entry>

  <entry id="budget_daily">
    <type>integer</type>
    <category>budget</category>
    <group>MED_attributes</group>
    <valid_values>0,1,2,3</valid_values>
    <desc>
      sets the diagnotics level of the daily budgets. [0,1,2,3],
      written only if do_budgets variable is .true.,
      0=none,
      1=+net summary budgets,
      2=+detailed lnd/ocn/ice component budgets,
      3=+detailed atm budgets
      default: 0
    </desc>
    <values>
      <value>0</value>
    </values>
  </entry>

  <entry id="budget_month">
    <type>integer</type>
    <category>expdef</category>
    <group>MED_attributes</group>
    <valid_values>0,1,2,3</valid_values>
    <desc>
      sets the diagnotics level of the monthy budgets. [0,1,2,3],
      written only if do_budgets variable is .true.,
      0=none,
      1=+net summary budgets,
      2=+detailed lnd/ocn/ice component budgets,
      3=+detailed atm budgets
      default: 1
    </desc>
    <values>
      <value>1</value>
    </values>
  </entry>

  <entry id="budget_ann">
    <type>integer</type>
    <category>budget</category>
    <group>MED_attributes</group>
    <valid_values>0,1,2,3</valid_values>
    <desc>
      sets the diagnotics level of the annual budgets. [0,1,2,3],
      written only if do_budgets variable is .true.,
      0=none,
      1=+net summary budgets,
      2=+detailed lnd/ocn/ice component budgets,
      3=+detailed atm budgets
      default: 1
    </desc>
    <values>
      <value>1</value>
    </values>
  </entry>

  <entry id="budget_ltann">
    <type>integer</type>
    <category>budget</category>
    <group>MED_attributes</group>
    <valid_values>0,1,2,3</valid_values>
    <desc>
      sets the diagnotics level of the longterm budgets written at the end
      of the year. [0,1,2,3],
      written only if do_budgets variable is .true.,
      0=none,
      1=+net summary budgets,
      2=+detailed lnd/ocn/ice component budgets,
      3=+detailed atm budgets,
      default: 1
    </desc>
    <values>
      <value>1</value>
    </values>
  </entry>

  <entry id="budget_ltend">
    <type>integer</type>
    <category>budget</category>
    <group>MED_attributes</group>
    <valid_values>0,1,2,3</valid_values>
    <desc>
      sets the diagnotics level of the longterm budgets written at the end
      of each run. [0,1,2,3],
      written only if do_budgets variable is .true.,
      0=none,
      1=+net summary budgets,
      2=+detailed lnd/ocn/ice component budgets,
      3=+detailed atm budgets,
      default: 0
    </desc>
    <values>
      <value>0</value>
    </values>
  </entry>

  <!-- ======================================= -->
  <!-- MED instantaneous history output -->
  <!-- ======================================= -->

  <!-- note - currently CISM uses the history_option and history_n so the -->
  <!-- following attribute is listed as ALLCOMP rather than mediator -->
  <!-- because of this -->

  <entry id="history_option" modify_via_xml="HIST_OPTION">
    <type>char</type>
    <category>time</category>
    <group>ALLCOMP_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator history snapshot option (used with history_n and history_ymd)
      set by HIST_OPTION in env_run.xml.
      history_option alarms are:
      [none/never], turns option off
      [nsteps]   , history snapshot every history_n nsteps  , relative to current run start time
      [nseconds] , history snapshot every history_n nseconds, relative to current run start time
      [nminutes] , history snapshot every history_n nminutes, relative to current run start time
      [nhours]   , history snapshot every history_n nhours  , relative to current run start time
      [ndays]    , history snapshot every history_n ndays   , relative to current run start time
      [monthly]  , history snapshot every           month   , relative to current run start time
      [nmonths]  , history snapshot every history_n nmonths , relative to current run start time
      [nyears]   , history snapshot every history_n nyears  , relative to current run start time
      [date]     , history snapshot at history_ymd value
      [end]      , history snapshot at end
    </desc>
    <values>
      <value>$HIST_OPTION</value>
    </values>
  </entry>

  <entry id="history_n" modify_via_xml="HIST_N">
    <type>integer</type>
    <category>time</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      sets mediator snapshot history file frequency (like restart_n)
      set by HIST_N in env_run.xml.
    </desc>
    <values>
      <value>$HIST_N</value>
    </values>
  </entry>

  <entry id="history_ymd" modify_via_xml="HIST_YMD">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      date associated with history_option date.  yyyymmdd format.
      set by HIST_DATE in env_run.xml.
    </desc>
    <values>
      <value>$HIST_DATE</value>
    </values>
  </entry>

  <!-- ======================================= -->
  <!-- MED mediator history files -->
  <!-- ======================================= -->

  <entry id="history_option_med_inst">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator history for mediator aoflux and oceean albedoes (used with history_n and history_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_med_inst">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      sets mediator aoflux and ocean albedoes snapshot history file frequency for atm import/export fields (like restart_n)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>

  <!-- ======================================= -->
  <!-- MED atm history files -->
  <!-- ======================================= -->

  <entry id="history_option_atm_inst">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator history for atm import/export/fields snapshot option (used with history_n and history_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_atm_inst">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      sets mediator snapshot history file frequency for atm import/export fields (like restart_n)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>
  <entry id="history_option_atm_avg">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator time average history option (used with histavg_n and histavg_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_atm_avg">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      Sets mediator time-average history file frequency (like restart_option)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>

  <!-- MED histaux atm2med file 1 -->
  <entry id="histaux_atm2med_file1_enabled">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary mediator atm2med instantaneous history output every hour.</desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file1_flds">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary mediator atm2med instantaneous history output every hour.</desc>
    <values>
      <value>Faxa_swndr:Faxa_swvdr:Faxa_swndf:Faxa_swvdf</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file1_history_option">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option type</desc>
    <values>
      <value>nhours</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file1_history_n">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option span</desc>
    <values>
      <value>1</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file1_doavg">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>If true, use time average for aux file output.</desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file1_auxname">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary name identifier in history name</desc>
    <values>
      <value>atm.1h.inst</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file1_ntperfile">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Number of time samples per file.</desc>
    <values>
      <value>24</value>
    </values>
  </entry>

  <!-- MED histaux atm2med file 2 -->
  <entry id="histaux_atm2med_file2_enabled">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary atm2med history output averaged over 1 hour.</desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file2_flds">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary atm2med history output averaged over 1 hour.</desc>
    <values>
      <value>Sa_u:Sa_v</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file2_history_option">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option type</desc>
    <values>
      <value>nhours</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file2_history_n">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option span</desc>
    <values>
      <value>1</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file2_doavg">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>If true, use time average for aux file output.</desc>
    <values>
      <value>.true.</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file2_ntperfile">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Number of time samples per file.</desc>
    <values>
      <value>24</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file2_auxname">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary name identifier in history name</desc>
    <values>
      <value>atm.1h.avrg</value>
    </values>
  </entry>

  <!-- MED histaux atm2med file 3 -->
  <entry id="histaux_atm2med_file3_enabled">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>
      Auxiliary mediator atm2med precipitation history output every 3 hours
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file3_flds">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary mediator atm2med precipitation fields history output every 3 hours</desc>
    <values>
      <value>Faxa_rainc:Faxa_rainl:Faxa_snowc:Faxa_snowl</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file3_history_option">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option type</desc>
    <values>
      <value>nhours</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file3_history_n">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option span</desc>
    <values>
      <value>3</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file3_doavg">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>If true, use time average for aux file output.</desc>
    <values>
      <value>.true.</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file3_ntperfile">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Number of time samples per file.</desc>
    <values>
      <value>8</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file3_auxname">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary name identifier in history name.</desc>
    <values>
      <value>atm.3hprec.avrg</value>
    </values>
  </entry>

  <!-- MED histaux atm2med file 4 -->
  <entry id="histaux_atm2med_file4_enabled">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>
      Auxiliary mediator a2x dynamic, radiation, and precipitation history output every 3 hours
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file4_flds">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>
      Auxiliary mediator a2x dynamic, radiation, and precipitation fields history output every 3 hours
    </desc>
    <values>
      <value>Sa_z:Sa_topo:Sa_u:Sa_v:Sa_tbot:Sa_ptem:Sa_shum:Sa_dens:Sa_pbot:Sa_pslv:Faxa_lwdn:Faxa_rainc:Faxa_rainl:Faxa_snowc:Faxa_snowl:Faxa_swndr:Faxa_swvdr:Faxa_swndf:Faxa_swvdf:Sa_co2diag:Sa_co2prog</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file4_history_option">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option type</desc>
    <values>
      <value>nhours</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file4_history_n">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option span</desc>
    <values>
      <value>3</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file4_doavg">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>If true, use time average for aux file output.</desc>
    <values>
      <value>.true.</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file4_ntperfile">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Number of time samples per file.</desc>
    <values>
      <value>8</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file4_auxname">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary name identifier in history name.</desc>
    <values>
      <value>atm.3h.avrg</value>
    </values>
  </entry>

  <!-- MED histaux atm2med file 5 -->
  <entry id="histaux_atm2med_file5_enabled">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary mediator a2x aerosol and ghg history output daily or endofrun</desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file5_flds">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary mediator a2x aerosol and ghg history output daily or endofrun</desc>
    <values>
      <value>Faxa_bcph:Faxa_ocph:Faxa_dstwet:Faxa_dstdry:Sa_co2prog:Sa_co2diag</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file5_history_option">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option type</desc>
    <values>
      <value>nhours</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file5_history_n">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option span</desc>
    <values>
      <value>3</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file5_doavg">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>If true, use time average for aux file output.</desc>
    <values>
      <value>.true.</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file5_ntperfile">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Number of time samples per file.</desc>
    <values>
      <value>2</value>
    </values>
  </entry>
  <entry id="histaux_atm2med_file5_auxname">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary name identifier in history name</desc>
    <values>
      <value>atm.24h.avrg</value>
    </values>
  </entry>

  <!-- ======================================= -->
  <!-- MED ice history files -->
  <!-- ======================================= -->

  <entry id="history_option_ice_inst">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator history for ice import/export/fields snapshot option (used with history_n and history_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_ice_inst">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      sets mediator snapshot history file frequency for ice import/export fields (like restart_n)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>
  <entry id="history_option_ice_avg">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator time average history option (used with histavg_n and histavg_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_ice_avg">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      Sets mediator time-average history file frequency (like restart_option)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>

  <!-- ======================================= -->
  <!-- MED glc history files -->
  <!-- ======================================= -->

  <entry id="history_option_glc_inst">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator history for glc import/export/fields snapshot option (used with history_n and history_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_glc_inst">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      sets mediator snapshot history file frequency for glc import/export fields (like restart_n)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>
  <entry id="history_option_glc_avg">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator time average history option (used with histavg_n and histavg_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_glc_avg">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      Sets mediator time-average history file frequency (like restart_option)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>

  <!-- ======================================= -->
  <!-- MED lnd history files -->
  <!-- ======================================= -->

  <entry id="history_option_lnd_inst">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator history for lnd import/export/fields snapshot option (used with history_n and history_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_lnd_inst">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      sets mediator snapshot history file frequency for lnd import/export fields (like restart_n)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>
  <entry id="history_option_lnd_avg">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator time average history option (used with histavg_n and histavg_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_lnd_avg">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      Sets mediator time-average history file frequency (like restart_option)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>

  <!-- MED histaux lnd2med file 1 - all fields from land with instantaneous output-->
  <entry id="histaux_lnd2med_file1_enabled">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary mediator l2x fields every lnd coupling interval</desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="histaux_lnd2med_file1_flds">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary mediator lnd2med output every lnd coupling interval</desc>
    <values>
      <value>all</value>
    </values>
  </entry>
  <entry id="histaux_lnd2med_file1_history_option">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option type</desc>
    <values>
      <value>nsteps</value>
    </values>
  </entry>
  <entry id="histaux_lnd2med_file1_history_n">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option type</desc>
    <values>
      <value>1</value>
    </values>
  </entry>
  <entry id="histaux_lnd2med_file1_doavg">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>If true, use time average for aux file output.</desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="histaux_lnd2med_file1_ntperfile">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Number of time samples per file.</desc>
    <values>
      <value>1</value>
    </values>
  </entry>
  <entry id="histaux_lnd2med_file1_auxname">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary name identifier in history name</desc>
    <values>
      <value>lnd.ncpl.inst</value>
    </values>
  </entry>

  <!-- MED histaux lnd2med accumulated fields from land needed as glc input specially treated-->
  <!-- note that the following is ALLCOMP attributes since CTSM needs access to this variable to determine -->
  <!-- if it needs to send lnd->glc data to the mediator even if there is no glc -->
  <entry id="histaux_l2x1yrg">
    <type>logical</type>
    <category>aux_hist</category>
    <group>ALLCOMP_attributes</group>
    <desc>Auxiliary mediator lnd2med fields every year</desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>

  <!-- ======================================= -->
  <!-- MED ocn history files -->
  <!-- ======================================= -->

  <!-- MED histaux ocn2med file 1 -->
  <entry id="histaux_ocn2med_file1_enabled">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary mediator ocn2med average history output every day.</desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="histaux_ocn2med_file1_flds">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary mediator ocn2med average history output every day.</desc>
    <values>
      <value>So_bldepth:So_t:So_u:So_v</value>
    </values>
  </entry>
  <entry id="histaux_ocn2med_file1_history_option">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option type</desc>
    <values>
      <value>ndays</value>
    </values>
  </entry>
  <entry id="histaux_ocn2med_file1_history_n">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option type</desc>
    <values>
      <value>1</value>
    </values>
  </entry>
  <entry id="histaux_ocn2med_file1_doavg">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>If true, use time average for aux file output.</desc>
    <values>
      <value>.true.</value>
    </values>
  </entry>
  <entry id="histaux_ocn2med_file1_auxname">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary name identifier in history name</desc>
    <values>
      <value>ocn.24h.avg</value>
    </values>
  </entry>
  <entry id="histaux_ocn2med_file1_ntperfile">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Number of time samples per file.</desc>
    <values>
      <value>30</value>
    </values>
  </entry>

  <entry id="history_option_ocn_inst">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator history for ocn import/export/fields snapshot option (used with history_n and history_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_ocn_inst">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      sets mediator snapshot history file frequency for ocn import/export fields (like restart_n)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>
  <entry id="history_option_ocn_avg">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator time average history option (used with histavg_n and histavg_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_ocn_avg">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      Sets mediator time-average history file frequency (like restart_option)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>

  <!-- ======================================= -->
  <!-- MED rof history files -->
  <!-- ======================================= -->

  <entry id="history_option_rof_inst">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator history for rof import/export/fields snapshot option (used with history_n and history_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_rof_inst">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      sets mediator snapshot history file frequency for rof import/export fields (like restart_n)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>
  <entry id="history_option_rof_avg">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator time average history option (used with histavg_n and histavg_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_rof_avg">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      Sets mediator time-average history file frequency (like restart_option)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>

  <!-- MED histaux rof2med file 1 -->
  <entry id="histaux_rof2med_file1_enabled">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary mediator rof2med precipitation history output every 3 hours</desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="histaux_rof2med_file1_flds">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary mediator rof2med precipitation fields history output.</desc>
    <values>
      <value>all</value>
    </values>
  </entry>
  <entry id="histaux_rof2med_file1_history_option">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option type</desc>
    <values>
      <value>nhours</value>
    </values>
  </entry>
  <entry id="histaux_rof2med_file1_history_n">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>history option span</desc>
    <values>
      <value>3</value>
    </values>
  </entry>
  <entry id="histaux_rof2med_file1_doavg">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>If true, use time average for aux file output.</desc>
    <values>
      <value>.true.</value>
    </values>
  </entry>
  <entry id="histaux_rof2med_file1_ntperfile">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Number of time samples per file.</desc>
    <values>
      <value>2</value>
    </values>
  </entry>
  <entry id="histaux_rof2med_file1_auxname">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Auxiliary name identifier in history name</desc>
    <values>
      <value>rof.24h.avrg</value>
    </values>
  </entry>

  <!-- ======================================= -->
  <!-- MED wav history files -->
  <!-- ======================================= -->

  <entry id="history_option_wav_inst">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator history for wav import/export/fields snapshot option (used with history_n and history_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_wav_inst">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      sets mediator snapshot history file frequency for wav import/export fields (like restart_n)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>
  <entry id="history_option_wav_avg">
    <type>char</type>
    <category>time</category>
    <group>MED_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      mediator time average history option (used with histavg_n and histavg_ymd)
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>
  <entry id="history_n_wav_avg">
    <type>integer</type>
    <category>time</category>
    <group>MED_attributes</group>
    <desc>
      Sets mediator time-average history file frequency (like restart_option)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>

  <!-- ======================================= -->
  <!-- MED auxiliary wav2med history files -->
  <!-- ======================================= -->

  <entry id="histaux_wav2med_file1_enabled">
    <type>logical</type>
    <category>aux_hist</category>
    <group>ALLCOMP_attributes</group>
    <values>
      <value>.false.</value>
    </values>
    <desc>Auxiliary mediator wav2med average history output every day.
    Note that ww3dev will use this configuration variable and send
    the fields needed for wav2med auxiliary file</desc>
  </entry>
  <entry id="histaux_wav2med_file1_flds">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <values>
      <value>Sw_hs_avg:Sw_Tm1_avg:Sw_thm_avg:Sw_u_avg:Sw_v_avg:Sw_ustokes_avg:Sw_vstokes_avg:Sw_tusx_avg:Sw_tusy_avg:Sw_thp0_avg:Sw_fp0_avg:Sw_phs0_avg:Sw_phs1_avg:Sw_pdir0_avg:Sw_pdir1_avg:Sw_pTm10_avg:Sw_pTm11_avg</value>
    </values>
    <desc>Auxiliary mediator wav2med file1 colon delimited output
    fields. NOTE: these are assumed to be time averaged over a day in
    the WW3 cap - so the settings of histaux_wav2med_file1_history_n
    and histaux_wav2med_file1_history_option should be 1 and ndays,
    respectively.</desc>
  </entry>
  <entry id="histaux_wav2med_file1_history_option">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <values>
      <value>ndays</value>
    </values>
    <desc>Auxiliary mediator wav2med file1 output option</desc>
  </entry>
  <entry id="histaux_wav2med_file1_history_n">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <values>
      <value>1</value>
    </values>
    <desc>Auxiliary mediator wav2med file1 output frequency (used for option type)</desc>
  </entry>
  <entry id="histaux_wav2med_file1_doavg">
    <type>logical</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <values>
      <value>.false.</value>
    </values>
    <desc>Auxiliary mediator wav2med file1 time averaged flag for file output.
    If this flag is set to .false. only instantaneous output will be created in the auxiliary file.</desc>
  </entry>
  <entry id="histaux_wav2med_file1_auxname">
    <type>char</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <values>
      <value>wav.24h.avg</value>
    </values>
  </entry>
  <entry id="histaux_wav2med_file1_ntperfile">
    <type>integer</type>
    <category>aux_hist</category>
    <group>MED_attributes</group>
    <desc>Number of time samples per file.</desc>
    <values>
      <value>30</value>
    </values>
  </entry>

  <!-- =========================== -->
  <!-- MED mapping attributes      -->
  <!-- =========================== -->

  <entry id="mapuv_with_cart3d">
    <type>logical</type>
    <category>mapping</category>
    <group>MED_attributes</group>
    <desc>used for atm->ocn and atm-ice mapping of u and v; rotate u,v
    to 3d cartesian space, map from src->dest, then rotate back</desc>
    <values>
      <value>.true.</value>
      <value samegrid_atm_ocn='true'>.false.</value>
    </values>
  </entry>

  <entry id="atm2ocn_map">
    <type>char</type>
    <category>mapping</category>
    <group>MED_attributes</group>
    <desc>atm to ocn mapping, 'unset' or 'idmap' are normal possible values</desc>
    <values>
      <value>unset</value>
      <value samegrid_atm_ocn='true'>idmap</value>
    </values>
  </entry>
  <entry id="atm2ice_map">
    <type>char</type>
    <category>mapping</category>
    <group>MED_attributes</group>
    <desc>atm to ocn mapping, 'unset' or 'idmap' are normal possible values</desc>
    <values>
      <value>unset</value>
      <value samegrid_atm_ice='true'>idmap</value>
    </values>
  </entry>
  <entry id="atm2lnd_map">
    <type>char</type>
    <category>mapping</category>
    <group>MED_attributes</group>
    <desc>atm to lnd mapping, 'unset' or 'idmap' are normal possible values</desc>
    <values>
      <value>unset</value>
      <value samegrid_atm_lnd='true'>idmap</value>
    </values>
  </entry>
  <entry id="ocn2atm_map">
    <type>char</type>
    <category>mapping</category>
    <group>MED_attributes</group>
    <desc>ocn to atm mapping, 'unset' or 'idmap' are normal possible values</desc>
    <values>
      <value>unset</value>
      <value samegrid_atm_ocn='true'>idmap</value>
    </values>
  </entry>
  <entry id="ice2atm_map">
    <type>char</type>
    <category>mapping</category>
    <group>MED_attributes</group>
    <desc>ice to atm mapping, 'unset' or 'idmap' are normal possible values</desc>
    <values>
      <value>unset</value>
      <value samegrid_atm_ice='true'>idmap</value>
    </values>
  </entry>
  <entry id="lnd2atm_map">
    <type>char</type>
    <category>mapping</category>
    <group>MED_attributes</group>
    <desc>lnd to atm mapping, 'unset' or 'idmap' are normal possible values</desc>
    <values>
      <value>unset</value>
      <value samegrid_atm_lnd='true'>idmap</value>
    </values>
  </entry>
  <entry id="lnd2rof_map" modify_via_xml="LND2ROF_FMAPNAME">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>MED_attributes</group>
    <desc>lnd to rof mapping, 'unset' or 'idmap' are normal possible values (mapping file given for mizuRoute grids)</desc>
    <values>
      <value>$LND2ROF_FMAPNAME</value>
      <value samegrid_lnd_rof='true'>idmap</value>
    </values>
  </entry>
  <entry id="rof2lnd_map" modify_via_xml="ROF2LND_FMAPNAME">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>MED_attributes</group>
    <desc>rof to lnd mapping, 'unset' or 'idmap' are normal possible values (mapping file given for mizuRoute grids)</desc>
    <values>
      <value>$ROF2LND_FMAPNAME</value>
      <value samegrid_lnd_rof='true'>idmap</value>
    </values>
  </entry>
  <entry id="atm2wav_map">
    <type>char</type>
    <category>mapping</category>
    <group>MED_attributes</group>
    <desc>atm to wav mapping, 'unset' or 'idmap' are normal possible values</desc>
    <values>
      <value>unset</value>
      <value samegrid_atm_wav='true'>idmap</value>
    </values>
  </entry>

  <entry id="rof2ocn_liq_rmapname"    modify_via_xml="ROF2OCN_LIQ_RMAPNAME">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>MED_attributes</group>
    <desc>
      runoff to ocn nearest neighbor plus smoothing conservative mapping file
    </desc>
    <values>
      <value>$ROF2OCN_LIQ_RMAPNAME</value>
    </values>
  </entry>
  <entry id="rof2ocn_ice_rmapname"    modify_via_xml="ROF2OCN_ICE_RMAPNAME">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>MED_attributes</group>
    <desc>
      runoff to ocn nearest neighbor plus smoothing conservative mapping file
    </desc>
    <values>
      <value>$ROF2OCN_ICE_RMAPNAME</value>
    </values>
  </entry>

  <!-- =========================== -->
  <!-- ALLCOMP attributes          -->
  <!-- =========================== -->

  <entry id="ScalarFieldName">
    <type>char</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      name of the coupling field with scalar information
    </desc>
    <values>
      <value>cpl_scalars</value>
    </values>
  </entry>

  <entry id="ScalarFieldCount">
    <type>integer</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      total number of scalars in the scalar coupling field
    </desc>
    <values>
      <value>4</value>
    </values>
  </entry>

  <entry id="ScalarFieldIdxGridNX">
    <type>integer</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      index of scalar containing global grid cell count in X dimension
    </desc>
    <values>
      <value>1</value>
    </values>
  </entry>

  <entry id="ScalarFieldIdxGridNY">
    <type>integer</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      index of scalar containing global grid cell count in Y dimension
    </desc>
    <values>
      <value>2</value>
    </values>
  </entry>

  <entry id="ScalarFieldIdxNextSwCday">
    <type>integer</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      index of scalar containing calendar day of nextsw computation from atm
    </desc>
    <values>
      <value>3</value>
    </values>
  </entry>

  <entry id="ScalarFieldIdxPrecipFactor">
    <type>integer</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      index of scalar containing epbal precipitation factor from ocn (only for POP)
    </desc>
    <values>
      <value COMP_OCN="pop">4</value>
      <value COMP_OCN="blom">4</value>
      <value>0</value>
    </values>
  </entry>

  <entry id="flds_co2a">
    <type>logical</type>
    <category>flds</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Pass CO2 from ATM to surface components
      Set this by setting the xml variable BGC_MODE.
      If BGC_MODE is set to 'CO2A', then flds_co2a will be set to .true.
    </desc>
    <values>
      <value>.false.</value>
      <value BGC_MODE="CO2A.*">.true.</value>
    </values>
  </entry>

  <entry id="flds_co2b">
    <type>logical</type>
    <category>flds</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Pass CO2 from ATM to LND and back from LND to ATM
      Set this by setting the xml variable BGC_MODE.
      If BGC_MODE is set to 'CO2B', then flds_co2b will be set to .true.
    </desc>
    <values>
      <value>.false.</value>
      <value BGC_MODE="CO2B">.true.</value>
    </values>
  </entry>

  <entry id="flds_co2c">
    <type>logical</type>
    <category>flds</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Pass CO2 from ATM to surface (OCN/LND) and back from them to ATM
      Set this by setting the xml variable BGC_MODE.
      If BGC_MODE is set to 'CO2C', then flds_co2c will be set to .true.
    </desc>
    <values>
      <value>.false.</value>
      <value BGC_MODE="CO2C">.true.</value>
    </values>
  </entry>

  <entry id="flds_bgc_oi">
    <type>logical</type>
    <category>seq_flds</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      If set to .true. BGC fields will be passed back and forth between the ocean and seaice
      via the mediator.
    </desc>
    <values>
      <value>.false.</value>
      <value BGC_MODE=".*_OI">.true.</value>
    </values>
  </entry>


  <entry  id="flds_wiso" modify_via_xml="FLDS_WISO">
    <type>logical</type>
    <category>flds</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Pass water isotopes between components
    </desc>
    <values>
      <value>$FLDS_WISO</value>
    </values>
  </entry>

  <entry id="flds_r2l_stream_channel_depths">
    <type>logical</type>
    <category>flds</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Pass channel depths from river component to land component. This is needed for the hillslope
      model in CTSM.
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>

  <entry  id="glc_nec" modify_via_xml="GLC_NEC">
    <type>integer</type>
    <category>flds</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Number of cism elevation classes. Set by the xml variable GLC_NEC in env_run.xml
    </desc>
    <values>
      <value>$GLC_NEC</value>
    </values>
  </entry>

  <entry id="ice_ncat" modify_via_xml="ICE_NCAT">
    <type>integer</type>
    <category>flds</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Number of sea ice thickness categories. Set by the xml variable ICE_NCAT in env_build.xml
    </desc>
    <values>
      <value>$ICE_NCAT</value>
    </values>
  </entry>

  <entry  id="cism_evolve" modify_via_xml="CISM_EVOLVE">
    <type>logical</type>
    <category>flds</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      False => CISM does not evolve but only sends initial information back to CTSM
    </desc>
    <values>
     <value>.false.</value>
     <value COMP_GLC="cism">$CISM_EVOLVE</value>
    </values>
  </entry>

  <!-- =========================== -->
  <!-- CLOCK Attributes            -->
  <!-- =========================== -->

  <entry id="atm_cpl_dt" modify_via_xml="ATM_NCPL" skip_default_entry="true">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      atm coupling interval in seconds
      set via ATM_NCPL in env_run.xml.
      ATM_NCPL is the number of times the atm is coupled per NCPL_BASE_PERIOD
      NCPL_BASE_PERIOD is also set in env_run.xml and is the base period
      associated with NCPL coupling frequency, and has valid values: hour,day,year,decade
    </desc>
  </entry>

  <entry id="lnd_cpl_dt" modify_via_xml="LND_NCPL" skip_default_entry="true">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      lnd coupling interval in seconds
      set via LND_NCPL in env_run.xml.
      LND_NCPL is the number of times the lnd is coupled per NCPL_BASE_PERIOD
      NCPL_BASE_PERIOD is also set in env_run.xml and is the base period
      associated with NCPL coupling frequency, nad has valid values: hour,day,year,decade
    </desc>
  </entry>

  <entry id="rof_cpl_dt" modify_via_xml="ROF_NCPL" skip_default_entry="true">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      river runoff coupling interval in seconds
      currently set by default to 10800 seconds.
      default: 10800
    </desc>
  </entry>

  <entry id="ice_cpl_dt" modify_via_xml="ICE_NCPL" skip_default_entry="true">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      ice coupling interval in seconds
      set via ICE_NCPL in env_run.xml.
      ICE_NCPL is the number of times the ice is coupled per NCPL_BASE_PERIOD
      NCPL_BASE_PERIOD is also set in env_run.xml and is the base period
      associated with NCPL coupling frequency, nad has valid values: hour,day,year,decade
    </desc>
  </entry>

  <entry id="ocn_cpl_dt" modify_via_xml="OCN_NCPL" skip_default_entry="true">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      ocn coupling interval in seconds
      set via OCN_NCPL in env_run.xml.
      OCN_NCPL is the number of times the ocn is coupled per NCPL_BASE_PERIOD
      NCPL_BASE_PERIOD is also set in env_run.xml and is the base period
      associated with NCPL coupling frequency, nad has valid values: hour,day,year,decade
    </desc>
  </entry>

  <entry id="glc_cpl_dt" modify_via_xml="GLC_NCPL" skip_default_entry="true">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      glc coupling interval in seconds
      set via GLC_NCPL in env_run.xml.
      GLC_NCPL is the number of times the glc is coupled per NCPL_BASE_PERIOD
      NCPL_BASE_PERIOD is also set in env_run.xml and is the base period
      associated with NCPL coupling frequency, nad has valid values: hour,day,year,decade
    </desc>
  </entry>

  <entry id="glc_avg_period" modify_via_xml="GLC_AVG_PERIOD">
    <type>char</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <valid_values>glc_coupling_period,yearly</valid_values>
    <values>
      <value>$GLC_AVG_PERIOD</value>
    </values>
    <desc>
      Period at which coupler averages fields sent to GLC.
      This supports doing the averaging to GLC less frequently than GLC is called
      (i.e., separating the averaging frequency from the calling frequency).
      This is useful because there are benefits to only averaging the GLC inputs
      as frequently as they are really needed (yearly for CISM), but GLC needs to
      still be called more frequently than that in order to support mid-year restarts.

      Setting glc_avg_period to 'glc_coupling_period' means that the averaging is
      done exactly when the GLC is called (governed by GLC_NCPL).
    </desc>
  </entry>

  <entry id="wav_cpl_dt" modify_via_xml="WAV_NCPL" skip_default_entry="true">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      wav coupling interval in seconds
      set via WAV_NCPL in env_run.xml.
      WAV_NCPL is the number of times the wav is coupled per NCPL_BASE_PERIOD
      NCPL_BASE_PERIOD is also set in env_run.xml and is the base period
      associated with NCPL coupling frequency, nad has valid values: hour,day,year,decade
    </desc>
  </entry>

  <entry id="esp_cpl_dt" skip_default_entry="true">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      esp run interval in seconds
      esp_cpl_dt is the number of times the esp is run per NCPL_BASE_PERIOD
      NCPL_BASE_PERIOD is set in env_run.xml and is the base period
      associated with NCPL coupling frequency, nad has valid values: hour,day,year,decade
      default value set by buildnml to be the pause interval if pause is active
      otherwise, it is set to the shortest component coupling time
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>

  <entry id="calendar" modify_via_xml="CALENDAR">
    <type>char</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <valid_values>NO_LEAP,GREGORIAN</valid_values>
    <desc>
      calendar in use.  [NO_LEAP, GREOGORIAN].
      set by CALENDAR in env_build.xml
    </desc>
    <values>
      <value>$CALENDAR</value>
    </values>
  </entry>

  <entry id="start_ymd" modify_via_xml="RUN_STARTDATE">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      Run start date in yyyymmdd format, only used for startup and hybrid runs.
      default: 00010101
    </desc>
    <values>
      <value>00010101</value>
    </values>
  </entry>

  <entry id="start_tod" modify_via_xml="START_TOD">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      Start time-of-day in universal time (seconds), should be between zero and 86400
      default: 0
    </desc>
    <values>
      <value>$START_TOD</value>
    </values>
  </entry>

  <entry id="stop_option" modify_via_xml="STOP_OPTION">
    <type>char</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,monthly,nmonths,nyears,date,end</valid_values>
    <desc>
      sets the run length with stop_n and stop_ymd
      stop_option alarms are:
      [none/never] , turns option off
      [nsteps]     , stops every stop_n nsteps  , relative to current run start time
      [nseconds]   , stops every stop_n nseconds, relative to current run start time
      [nminutes]   , stops every stop_n nminutes, relative to current run start time
      [nhours]     , stops every stop_n nhours  , relative to current run start time
      [ndays]      , stops every stop_n ndays   , relative to current run start time
      [nmonths]    , stops every stop_n nmonths , relative to current run start time
      [nyears]     , stops every stop_n nyears  , relative to current run start time
      [monthly]    , stops every        month   , relative to current run start time
      [yearly]     , stops every        year    , relative to current run start time
      [end]        , stops at end
      [date]       , stops at stop_ymd value
    </desc>
    <values>
      <value>$STOP_OPTION</value>
    </values>
  </entry>

  <entry id="stop_n" modify_via_xml="STOP_N">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      Sets the run length with stop_option and stop_ymd
    </desc>
    <values>
      <value>$STOP_N</value>
    </values>
  </entry>

  <entry id="stop_ymd" modify_via_xml="STOP_YMD">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      date in yyyymmdd format, sets the run length with stop_option and stop_n,
      can be in addition to stop_option and stop_n, negative value implies off
    </desc>
    <values>
      <value>$STOP_DATE</value>
    </values>
  </entry>

  <entry id="stop_tod">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      Stop time-of-day in universal time (seconds), should be between zero and 86400
      default: 0
    </desc>
    <values>
      <value>0</value>
    </values>
  </entry>

  <entry id="restart_option" modify_via_xml="REST_OPTION">
    <type>char</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      sets the restart frequency with restart_n and restart_ymd
      restart_option alarms are:
      [none/never], turns option off
      [nsteps]   , restarts every restart_n nsteps  , relative to current run start time
      [nseconds] , restarts every restart_n nseconds, relative to current run start time
      [nminutes] , restarts every restart_n nminutes, relative to current run start time
      [nhours]   , restarts every restart_n nhours  , relative to current run start time
      [ndays]    , restarts every restart_n ndays   , relative to current run start time
      [nmonths]  , restarts every restart_n nmonths , relative to current run start time
      [nyears]   , restarts every restart_n nyears  , relative to current run start time
      [monthly]  , restarts every           month   , relative to current run start time
      [yearly]   , restarts every           year    , relative to current run start time
      [date]     , restarts at restart_ymd value
      [end]      , restarts at end
    </desc>
    <values>
      <value>$REST_OPTION</value>
    </values>
  </entry>

  <entry id="restart_n" modify_via_xml="REST_N">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      Sets model restart writes with restart_option and restart_ymd (same options as stop_n)
    </desc>
    <values>
      <value>$REST_N</value>
    </values>
  </entry>

  <entry id="restart_ymd" modify_via_xml="REST_YMD">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      Date in yyyymmdd format, sets model restart write date with rest_option and restart_n
      default: STOP_N
    </desc>
    <values>
      <value>$REST_DATE</value>
    </values>
  </entry>

  <entry id="end_restart">
    <type>logical</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      true => write restarts at end of run
      forces a restart write at the end of the run in addition to any
      setting associated with rest_option.  default=true.  this setting
      will be set to false if restart_option is none or never.
      default: false
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>

  <entry id="tprof_option">
    <type>char</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <valid_values>none,never,nsteps,nseconds,nminutes,nhours,ndays,nmonths,nyears,monthly,yearly,date,end</valid_values>
    <desc>
      Sets timing output file frequency (like rest_option but relative to run start date)
      tprof_option alarms are:
      [none/never], turns option off
      [nsteps]   , every tprof_n nsteps  , relative to current run start time
      [nseconds] , every tprof_n nseconds, relative to current run start time
      [nminutes] , every tprof_n nminutes, relative to current run start time
      [nhours]   , every tprof_n nhours  , relative to current run start time
      [ndays]    , every tprof_n ndays   , relative to current run start time
      [nmonths]  , every tprof_n nmonths , relative to current run start time
      [nyears]   , every tprof_n nyears  , relative to current run start time
      [monthly]  , every         month   , relative to current run start time
      [yearly]   , every         year    , relative to current run start time
      [date]     , at tprof_ymd value
      [end]      , at end
    </desc>
    <values>
      <value>never</value>
    </values>
  </entry>

  <entry id="tprof_n">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      Sets timing output file frequency (like restart_n)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>

  <entry id="tprof_ymd">
    <type>integer</type>
    <category>time</category>
    <group>CLOCK_attributes</group>
    <desc>
      yyyymmdd format, sets timing output file date (like restart_date)
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>

  <!-- =========================== -->
  <!--  PELAYOUT attributes        -->
  <!-- =========================== -->

  <entry id="ninst" modify_via_xml="NINST">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      The number of model instances in the executable
    </desc>
    <values>
      <value>$NINST</value>
    </values>
  </entry>
  <entry id="atm_ntasks" modify_via_xml="NTASKS_ATM">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of mpi tasks assigned to the atm components.
      set by NTASKS_ATM in env_configure.xml.
    </desc>
    <values>
      <value>$NTASKS_ATM</value>
    </values>
  </entry>
  <entry id="atm_nthreads" modify_via_xml="NTHRDS_ATM">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of threads per mpi task for the atm component.
      set by NTHRDS_ATM in env_configure.xml.
    </desc>
    <values>
      <value>$NTHRDS_ATM</value>
    </values>
  </entry>
  <entry id="atm_rootpe" modify_via_xml="ROOTPE_ATM">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the global mpi task rank of the root processor assigned to the atm component.
      set by ROOTPE_ATM in env_configure.xml.
    </desc>
    <values>
      <value>$ROOTPE_ATM</value>
    </values>
  </entry>
  <entry id="atm_pestride" modify_via_xml="PSTRID_ATM">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the mpi global processors stride associated with the mpi tasks for the atm component.
      set by PSTRID_ATM in env_configure.xml.
    </desc>
    <values>
      <value>$PSTRID_ATM</value>
    </values>
  </entry>
  <entry id="lnd_ntasks" modify_via_xml="NTASKS_LND">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of mpi tasks assigned to the lnd components.
      set by NTASKS_LND in env_configure.xml.
    </desc>
    <values>
      <value>$NTASKS_LND</value>
    </values>
  </entry>
  <entry id="lnd_nthreads" modify_via_xml="NTHRDS_LND">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of threads per mpi task for the lnd component.
      set by NTHRDS_LND in env_configure.xml.
    </desc>
    <values>
      <value>$NTHRDS_LND</value>
    </values>
  </entry>
  <entry id="lnd_rootpe" modify_via_xml="ROOTPE_LND">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the global mpi task rank of the root processor assigned to the lnd component.
      set by ROOTPE_LND in env_configure.xml.
    </desc>
    <values>
      <value>$ROOTPE_LND</value>
    </values>
  </entry>
  <entry id="lnd_pestride" modify_via_xml="PSTRID_LND">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the mpi global processors stride associated with the mpi tasks for the lnd component.
      set by PSTRID_LND in env_configure.xml.
    </desc>
    <values>
      <value>$PSTRID_LND</value>
    </values>
  </entry>
  <entry id="ice_ntasks" modify_via_xml="NTASKS_ICE">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of mpi tasks assigned to the ice components.
      set by NTASKS_ICE in env_configure.xml.
    </desc>
    <values>
      <value>$NTASKS_ICE</value>
    </values>
  </entry>
  <entry id="ice_nthreads" modify_via_xml="NTHRDS_ICE">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of threads per mpi task for the ice component.
      set by NTHRDS_ICE in env_configure.xml.
    </desc>
    <values>
      <value>$NTHRDS_ICE</value>
    </values>
  </entry>
  <entry id="ice_rootpe" modify_via_xml="ROOTPE_ICE">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the global mpi task rank of the root processor assigned to the ice component.
      set by ROOTPE_ICE in env_configure.xml.
    </desc>
    <values>
      <value>$ROOTPE_ICE</value>
    </values>
  </entry>
  <entry id="ice_pestride" modify_via_xml="PSTRID_ICE">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the mpi global processors stride associated with the mpi tasks for the ice component.
      set by PSTRID_ICE in env_configure.xml.
    </desc>
    <values>
      <value>$PSTRID_ICE</value>
    </values>
  </entry>
  <entry id="ocn_ntasks" modify_via_xml="NTASKS_OCN">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of mpi tasks assigned to the ocn components.
      set by NTASKS_OCN in env_configure.xml.
    </desc>
    <values>
      <value>$NTASKS_OCN</value>
    </values>
  </entry>
  <entry id="ocn_nthreads" modify_via_xml="NTHRDS_OCN">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of threads per mpi task for the ocn component.
      set by NTHRDS_OCN in env_configure.xml.
    </desc>
    <values>
      <value>$NTHRDS_OCN</value>
    </values>
  </entry>
  <entry id="ocn_rootpe" modify_via_xml="ROOTPE_OCN">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the global mpi task rank of the root processor assigned to the ocn component.
      set by ROOTPE_OCN in env_configure.xml.
    </desc>
    <values>
      <value>$ROOTPE_OCN</value>
    </values>
  </entry>
  <entry id="ocn_pestride" modify_via_xml="PSTRID_OCN">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the mpi global processors stride associated with the mpi tasks for the ocn component.
      set by PSTRID_OCN in env_configure.xml.  default: 1
    </desc>
    <values>
      <value>$PSTRID_OCN</value>
    </values>
  </entry>
  <entry id="glc_ntasks" modify_via_xml="NTASKS_GLC">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of mpi tasks assigned to the glc components.
      set by NTASKS_GLC in env_configure.xml.
    </desc>
    <values>
      <value>$NTASKS_GLC</value>
    </values>
  </entry>
  <entry id="glc_nthreads" modify_via_xml="NTHRDS_GLC">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of threads per mpi task for the glc component.
      set by NTHRDS_GLC in env_configure.xml.
    </desc>
    <values>
      <value>$NTHRDS_GLC</value>
    </values>
  </entry>
  <entry id="glc_rootpe" modify_via_xml="ROOTPE_GLC">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the global mpi task rank of the root processor assigned to the glc component.
      set by ROOTPE_GLC in env_configure.xml.
    </desc>
    <values>
      <value>$ROOTPE_GLC</value>
    </values>
  </entry>
  <entry id="glc_pestride" modify_via_xml="PSTRID_GLC">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the mpi global processors stride associated with the mpi tasks for the glc component.
      set by PSTRID_GLC in env_configure.xml.
    </desc>
    <values>
      <value>$PSTRID_GLC</value>
    </values>
  </entry>
  <entry id="wav_ntasks" modify_via_xml="NTASKS_WAV">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of mpi tasks assigned to the wav components.
      set by NTASKS_WAV in env_configure.xml.
    </desc>
    <values>
      <value>$NTASKS_WAV</value>
    </values>
  </entry>
  <entry id="wav_nthreads" modify_via_xml="NTHRDS_WAV">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of threads per mpi task for the wav component.
      set by NTHRDS_WAV in env_configure.xml.
    </desc>
    <values>
      <value>$NTHRDS_WAV</value>
    </values>
  </entry>
  <entry id="wav_rootpe" modify_via_xml="ROOTPE_WAV">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the global mpi task rank of the root processor assigned to the wav component.
      set by ROOTPE_WAV in env_configure.xml.
    </desc>
    <values>
      <value>$ROOTPE_WAV</value>
    </values>
  </entry>
  <entry id="wav_pestride" modify_via_xml="PSTRID_WAV">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the mpi global processors stride associated with the mpi tasks for the wav component.
      set by PSTRID_WAV in env_configure.xml.
    </desc>
    <values>
      <value>$PSTRID_WAV</value>
    </values>
  </entry>
  <entry id="rof_ntasks" modify_via_xml="NTASKS_ROF">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of mpi tasks assigned to the lnd components.
      set by NTASKS_LND in env_configure.xml.
    </desc>
    <values>
      <value>$NTASKS_ROF</value>
    </values>
  </entry>
  <entry id="rof_nthreads" modify_via_xml="NTHRDS_ROF">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of threads per mpi task for the lnd component.
      set by NTHRDS_ROF in env_configure.xml.
    </desc>
    <values>
      <value>$NTHRDS_ROF</value>
    </values>
  </entry>
  <entry id="rof_rootpe" modify_via_xml="ROOTPE_ROF">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the global mpi task rank of the root processor assigned to the lnd component.
      set by ROOTPE_LND in env_configure.xml.
    </desc>
    <values>
      <value>$ROOTPE_ROF</value>
    </values>
  </entry>
  <entry id="rof_pestride" modify_via_xml="PSTRID_ROF">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the mpi global processors stride associated with the mpi tasks for the lnd component.
      set by PSTRID_LND in env_configure.xml.
    </desc>
    <values>
      <value>$PSTRID_ROF</value>
    </values>
  </entry>
  <entry id="esp_ntasks" modify_via_xml="NTASKS_ESP">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of mpi tasks assigned to the esp components.
      set by NTASKS_ESP in env_configure.xml.
    </desc>
    <values>
      <value>$NTASKS_ESP</value>
    </values>
  </entry>
  <entry  id="esp_nthreads" modify_via_xml="NTHRDS_ESP">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of threads per mpi task for the esp component.
      set by NTHRDS_ESP in env_configure.xml.
    </desc>
    <values>
      <value>$NTHRDS_ESP</value>
    </values>
  </entry>
  <entry  id="esp_rootpe" modify_via_xml="ROOTPE_ESP">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the global mpi task rank of the root processor assigned to the esp component.
      set by ROOTPE_ESP in env_configure.xml.
    </desc>
    <values>
      <value>$ROOTPE_ESP</value>
    </values>
  </entry>
  <entry  id="esp_pestride" modify_via_xml="PSTRID_ESP">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the mpi global processors stride associated with the mpi tasks for the esp component.
      set by PSTRID_ESP in env_configure.xml.
    </desc>
    <values>
      <value>$PSTRID_ESP</value>
    </values>
  </entry>
  <entry  id="cpl_ntasks" modify_via_xml="NTASKS_CPL">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of mpi tasks assigned to the cpl components.
      set by NTASKS_CPL in env_configure.xml.
    </desc>
    <values>
      <value>$NTASKS_CPL</value>
    </values>
  </entry>
  <entry id="cpl_nthreads" modify_via_xml="NTHRDS_CPL">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the number of threads per mpi task for the cpl component.
      set by NTHRDS_CPL in env_configure.xml.
    </desc>
    <values>
      <value>$NTHRDS_CPL</value>
    </values>
  </entry>
  <entry id="cpl_rootpe" modify_via_xml="ROOTPE_CPL">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the global mpi task rank of the root processor assigned to the cpl component.
      set by ROOTPE_CPL in env_configure.xml.
    </desc>
    <values>
      <value>$ROOTPE_CPL</value>
    </values>
  </entry>
  <entry id="cpl_pestride" modify_via_xml="PSTRID_CPL">
    <type>integer</type>
    <category>cime_pes</category>
    <group>PELAYOUT_attributes</group>
    <desc>
      the mpi global processors stride associated with the mpi tasks for the cpl component.
      set by PSTRID_CPL in env_configure.xml.
    </desc>
    <values>
      <value>$PSTRID_CPL</value>
    </values>
  </entry>

  <!-- ===========================            -->
  <!-- namelist debug_inparm                  -->
  <!--  input in file drv_in (used in esmApp.F90) -->
  <!-- ===========================            -->

  <entry id="create_esmf_pet_files" modify_via_xml="CREATE_ESMF_PET_FILES">
    <type>logical</type>
    <category>debugging</category>
    <group>debug_inparm</group>
    <desc>
    </desc>
    <values>
      <value>$CREATE_ESMF_PET_FILES</value>
    </values>
  </entry>

  <!-- =========================== -->
  <!-- group prof_inparm           -->
  <!--  in perf_mod.F90            -->
  <!-- =========================== -->

  <entry id="profile_global_stats">
    <type>logical</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
    </desc>
    <values>
      <value>.true.</value>
    </values>
  </entry>
  <entry id="profile_single_file">
    <type>logical</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="profile_disable">
    <type>logical</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
    </desc>
    <values>
      <value timer_level='pos'>.false.</value>
      <value timer_level='neg'>.true.</value>
    </values>
  </entry>
  <entry id="profile_barrier">
    <type>logical</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="profile_depth_limit" modify_via_xml="TIMER_LEVEL">
    <type>integer</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
    </desc>
    <values>
      <value>$TIMER_LEVEL</value>
    </values>
  </entry>
  <entry id="profile_outpe_stride">
    <type>integer</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
    </desc>
    <values>
      <value>0</value>
    </values>
  </entry>
  <entry id="profile_detail_limit"   modify_via_xml="TIMER_DETAIL">
    <type>integer</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
    </desc>
    <values>
      <value>$TIMER_DETAIL</value>
    </values>
  </entry>
  <entry id="profile_timer">
    <type>integer</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
    </desc>
    <values>
      <value>4</value> <!-- mpiwtime -->
      <value MACH="yellowstone">2</value> <!-- nanotime -->
      <value MPILIB="mpi-serial">1</value> <!-- gettimeofday -->
      <value MPILIB="mpi-serial" OS="AIX">3</value> <!-- read_real_time -->
    </values>
  </entry>
  <entry id="profile_ovhd_measurement">
    <type>logical</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
      default: .false.
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="profile_add_detail">
    <type>logical</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
      default: .false.
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry  id="profile_outpe_num">
    <type>integer</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
      default: 1
    </desc>
    <values>
      <value>1</value>
    </values>
  </entry>
  <entry id="profile_papi_enable" modify_via_xml="PROFILE_PAPI_ENABLE">
    <type>logical</type>
    <category>performance</category>
    <group>prof_inparm</group>
    <desc>
      default: .false.
    </desc>
    <values>
      <value>$PROFILE_PAPI_ENABLE</value>
    </values>
  </entry>

  <!-- ===========================            -->
  <!-- namelist group papi_inparm             -->
  <!--  in file drv_in (used in perf_mod.F90) -->
  <!-- ===========================            -->

  <entry id="papi_ctr1_str">
    <type>char</type>
    <category>performance</category>
    <group>papi_inparm</group>
    <desc>
      See gptl_papi.c for the list of valid values
    </desc>
    <values>
      <value>PAPI_FP_OPS</value>
    </values>
  </entry>
  <entry id="papi_ctr2_str">
    <type>char</type>
    <category>performance</category>
    <group>papi_inparm</group>
    <desc>
      See gptl_papi.c for the list of valid values
    </desc>
    <values>
      <value>PAPI_NO_CTR</value>
    </values>
  </entry>
  <entry id="papi_ctr3_str">
    <type>char</type>
    <category>performance</category>
    <group>papi_inparm</group>
    <desc>
      See gptl_papi.c for the list of valid values
    </desc>
    <values>
      <value>PAPI_NO_CTR</value>
    </values>
  </entry>
  <entry id="papi_ctr4_str">
    <type>char</type>
    <category>performance</category>
    <group>papi_inparm</group>
    <desc>
      See gptl_papi.c for the list of valid values
    </desc>
    <values>
      <value>PAPI_NO_CTR</value>
    </values>
  </entry>

  <!-- ===========================   -->
  <!-- namelist: DRIVER_attributes  -->
  <!-- ===========================   -->

  <entry id="pio_debug_level" modify_via_xml="PIO_DEBUG_LEVEL">
    <type>integer</type>
    <category>pio</category>
    <group>DRIVER_attributes</group>
    <valid_values>0,1,2,3,4,5,6</valid_values>
    <desc>
      pio debug level
      valid values: 0,1,2,3,4,5,6
    </desc>
    <values>
      <value>$PIO_DEBUG_LEVEL</value>
    </values>
  </entry>

  <entry id="pio_blocksize" modify_via_xml="PIO_BLOCKSIZE">
    <type>integer</type>
    <category>pio</category>
    <group>DRIVER_attributes</group>
    <desc>
      blocksize for pio box rearranger
    </desc>
    <values>
      <value>$PIO_BLOCKSIZE</value>
    </values>
  </entry>

  <entry id="pio_buffer_size_limit" modify_via_xml="PIO_BUFFER_SIZE_LIMIT">
    <type>integer</type>
    <category>pio</category>
    <group>DRIVER_attributes</group>
    <desc>
      pio buffer size limit
    </desc>
    <values>
      <value>$PIO_BUFFER_SIZE_LIMIT</value>
    </values>
  </entry>

  <entry id="pio_rearr_comm_type" modify_via_xml="PIO_REARR_COMM_TYPE">
    <type>char</type>
    <category>pio</category>
    <group>DRIVER_attributes</group>
    <valid_values>p2p,coll,default</valid_values>
    <desc>
      pio rearranger communication type.
      valid values: p2p, coll, default
    </desc>
    <values>
      <value>$PIO_REARR_COMM_TYPE</value>
    </values>
  </entry>

  <entry id="pio_rearr_comm_fcd" modify_via_xml="PIO_REARR_COMM_FCD">
    <type>char</type>
    <category>pio</category>
    <group>DRIVER_attributes</group>
    <valid_values>2denable,io2comp,comp2io,disable,default</valid_values>
    <desc>
      pio rearranger communication flow control direction.
    </desc>
    <values>
      <value>$PIO_REARR_COMM_FCD</value>
    </values>
  </entry>

  <entry id="pio_rearr_comm_max_pend_req_comp2io" modify_via_xml=" PIO_REARR_COMM_MAX_PEND_REQ_COMP2IO">
    <type>integer</type>
    <category>pio</category>
    <group>DRIVER_attributes</group>
    <desc>
      pio rearranger communication max pending req (comp2io)
    </desc>
    <values>
      <value>$PIO_REARR_COMM_MAX_PEND_REQ_COMP2IO</value>
    </values>
  </entry>

  <entry id="pio_rearr_comm_enable_hs_comp2io" modify_via_xml="PIO_REARR_COMM_ENABLE_HS_COMP2IO">
    <type>logical</type>
    <category>pio</category>
    <group>DRIVER_attributes</group>
    <desc>
      pio rearranger communication option: Enable handshake (comp2io)
    </desc>
    <values>
      <value>$PIO_REARR_COMM_ENABLE_HS_COMP2IO</value>
    </values>
  </entry>

  <entry id="pio_rearr_comm_enable_isend_comp2io"    modify_via_xml="PIO_REARR_COMM_ENABLE_ISEND_COMP2IO">
    <type>logical</type>
    <category>pio</category>
    <group>DRIVER_attributes</group>
    <desc>
      pio rearranger communication option: Enable isends (comp2io)
    </desc>
    <values>
      <value>$PIO_REARR_COMM_ENABLE_ISEND_COMP2IO</value>
    </values>
  </entry>

  <entry id="pio_rearr_comm_max_pend_req_io2comp"    modify_via_xml="PIO_REARR_COMM_MAX_PEND_REQ_IO2COMP">
    <type>integer</type>
    <category>pio</category>
    <group>DRIVER_attributes</group>
    <desc>
      pio rearranger communication max pending req (io2comp)
    </desc>
    <values>
      <value>$PIO_REARR_COMM_MAX_PEND_REQ_IO2COMP</value>
    </values>
  </entry>

  <entry id="pio_rearr_comm_enable_hs_io2comp"    modify_via_xml="PIO_REARR_COMM_ENABLE_HS_IO2COMP">
    <type>logical</type>
    <category>pio</category>
    <group>DRIVER_attributes</group>
    <desc>
      pio rearranger communication option: Enable handshake (io2comp)
    </desc>
    <values>
      <value>$PIO_REARR_COMM_ENABLE_HS_IO2COMP</value>
    </values>
  </entry>

  <entry id="pio_rearr_comm_enable_isend_io2comp">
    <type>logical</type>
    <category>pio</category>
    <group>DRIVER_attributes</group>
    <desc>
      pio rearranger communication option: Enable isends (io2comp)
      default: .false.
    </desc>
    <values>
      <value>$PIO_REARR_COMM_ENABLE_ISEND_IO2COMP</value>
    </values>
  </entry>

  <entry id="drv_flds_in_files" skip_default_entry="true">
    <type>char(10)</type>
    <category>drv_physics</category>
    <group>default_settings</group>
    <desc>
      List of files to merge together that contains drv_flds_in namelists
      The paths are relative to the case directory. drv_flds_in include the namelists that
      the driver reads and gives information on additional fields to be passed to different
      components that need to look at the same data.
    </desc>
    <values>
      <value>Buildconf/camconf/drv_flds_in,Buildconf/clmconf/drv_flds_in,Buildconf/datmconf/drv_flds_in</value>
    </values>
  </entry>

  <entry id="data_assimilation_atm" modify_via_xml="DATA_ASSIMILATION_ATM">
    <type>logical</type>
    <category>data_assimilation</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Whether Data Assimilation is on for component atm
    </desc>
    <values>
      <value>$DATA_ASSIMILATION_ATM</value>
    </values>
  </entry>

  <entry id="data_assimilation_cpl" modify_via_xml="DATA_ASSIMILATION_CPL">
    <type>logical</type>
    <category>data_assimilation</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Whether Data Assimilation is on for component CPL
    </desc>
    <values>
      <value>$DATA_ASSIMILATION_CPL</value>
    </values>
  </entry>

  <entry id="data_assimilation_ocn" modify_via_xml="DATA_ASSIMILATION_OCN">
    <type>logical</type>
    <category>data_assimilation</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Whether Data Assimilation is on for component ocn
    </desc>
    <values>
      <value>$DATA_ASSIMILATION_OCN</value>
    </values>
  </entry>

  <entry id="data_assimilation_wav" modify_via_xml="DATA_ASSIMILATION_WAV">
    <type>logical</type>
    <category>data_assimilation</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Whether Data Assimilation is on for component wav
    </desc>
    <values>
      <value>$DATA_ASSIMILATION_WAV</value>
    </values>
  </entry>

  <entry id="data_assimilation_glc" modify_via_xml="DATA_ASSIMILATION_GLC">
    <type>logical</type>
    <category>data_assimilation</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Whether Data Assimilation is on for component glc
    </desc>
    <values>
      <value>$DATA_ASSIMILATION_GLC</value>
    </values>
  </entry>

  <entry id="data_assimilation_rof" modify_via_xml="DATA_ASSIMILATION_ROF">
    <type>logical</type>
    <category>data_assimilation</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Whether Data Assimilation is on for component rof
    </desc>
    <values>
      <value>$DATA_ASSIMILATION_ROF</value>
    </values>
  </entry>

  <entry id="data_assimilation_ice" modify_via_xml="DATA_ASSIMILATION_ICE">
    <type>logical</type>
    <category>data_assimilation</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Whether Data Assimilation is on for component ice
    </desc>
    <values>
      <value>$DATA_ASSIMILATION_ICE</value>
    </values>
  </entry>

  <entry id="data_assimilation_lnd" modify_via_xml="DATA_ASSIMILATION_LND">
    <type>logical</type>
    <category>data_assimilation</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      Whether Data Assimilation is on for component lnd
    </desc>
    <values>
      <value>$DATA_ASSIMILATION_LND</value>
    </values>
  </entry>

  <entry id="wav_coupling_to_cice">
    <type>logical</type>
    <category>expdef</category>
    <group>ALLCOMP_attributes</group>
    <desc>
      If true, wav-ice coupling is active
    </desc>
    <values>
      <value>.false.</value>
      <!-- The following is not set as a default for now -->
      <!-- <value wav_coupling_to_cice='on'>.true.</value>    -->
    </values>
  </entry>

  <!-- ======================================== -->
  <!--  ATM attributes                          -->
  <!-- ======================================== -->

  <entry id="Verbosity@atm_attributes" modify_via_xml="ESMF_VERBOSITY_LEVEL">
    <type>char</type>
    <category>nuopc</category>
    <group>ATM_attributes</group>
    <valid_values>off,low,high,max</valid_values>
    <values>
      <value>$ESMF_VERBOSITY_LEVEL</value>
    </values>
  </entry>
  <entry id="mesh_atm" modify_via_xml="ATM_DOMAIN_MESH">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>ALLCOMP_attributes</group>
    <desc>
      MESH description of atm grid
    </desc>
    <values>
      <value>$ATM_DOMAIN_MESH</value>
    </values>
  </entry>
  <entry id="perpetual">
    <type>logical</type>
    <category>expdef</category>
    <group>ATM_attributes</group>
    <desc>
      Perpetual flag
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>
  <entry id="perpetual_ymd">
    <type>integer</type>
    <category>expdef</category>
    <group>ATM_attributes</group>
    <desc>
      Perpetual date
    </desc>
    <values>
      <value>-999</value>
    </values>
  </entry>
  <entry id="aqua_planet" modify_via_xml="DOCN_MODE">
    <type>logical</type>
    <category>expdef</category>
    <group>ATM_attributes</group>
    <desc>
      true => turn on aquaplanet mode in cam
    </desc>
    <values>
      <value>.false.</value>
    </values>
  </entry>

  <!-- ======================================== -->
  <!--  ICE attributes                          -->
  <!-- ======================================== -->

  <entry id="Verbosity@ice_attributes" modify_via_xml="ESMF_VERBOSITY_LEVEL">
    <type>char</type>
    <category>nuopc</category>
    <group>ICE_attributes</group>
    <valid_values>off,low,high,max</valid_values>
    <values>
      <value>$ESMF_VERBOSITY_LEVEL</value>
    </values>
  </entry>
  <entry id="mesh_ice" modify_via_xml="ICE_DOMAIN_MESH">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>ALLCOMP_attributes</group>
    <desc>
      MESH description of ice grid
    </desc>
    <values>
      <value>$ICE_DOMAIN_MESH</value>
    </values>
  </entry>

  <!-- ======================================== -->
  <!--  GLC attributes                          -->
  <!-- ======================================== -->

  <entry id="Verbosity@glc_attributes" modify_via_xml="ESMF_VERBOSITY_LEVEL">
    <type>char</type>
    <category>nuopc</category>
    <group>GLC_attributes</group>
    <valid_values>off,low,high,max</valid_values>
    <values>
      <value>$ESMF_VERBOSITY_LEVEL</value>
    </values>
  </entry>
  <entry id="mesh_glc" modify_via_xml="GLC_DOMAIN_MESH">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>ALLCOMP_attributes</group>
    <desc>
      MESH description of glc grid
    </desc>
    <values>
      <value>$GLC_DOMAIN_MESH</value>
    </values>
  </entry>

  <!-- ======================================== -->
  <!--  LND attributes                          -->
  <!-- ======================================== -->

  <entry id="Verbosity@lnd_attributes" modify_via_xml="ESMF_VERBOSITY_LEVEL">
    <type>char</type>
    <category>nuopc</category>
    <group>LND_attributes</group>
    <valid_values>off,low,high,max</valid_values>
    <values>
      <value>$ESMF_VERBOSITY_LEVEL</value>
    </values>
  </entry>
  <entry id="mesh_lnd" modify_via_xml="LND_DOMAIN_MESH">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>ALLCOMP_attributes</group>
    <desc>
      MESH description of lnd grid
    </desc>
    <values>
      <value>$LND_DOMAIN_MESH</value>
    </values>
  </entry>

  <!-- ======================================== -->
  <!--  OCN attributes                          -->
  <!-- ======================================== -->

  <entry id="Verbosity@ocn_attributes" modify_via_xml="ESMF_VERBOSITY_LEVEL">
    <type>char</type>
    <category>nuopc</category>
    <group>OCN_attributes</group>
    <valid_values>off,low,high,max</valid_values>
    <values>
      <value>$ESMF_VERBOSITY_LEVEL</value>
    </values>
  </entry>
  <entry id="mesh_ocn" modify_via_xml="OCN_DOMAIN_MESH">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>ALLCOMP_attributes</group>
    <desc>
      MESH description of ocn grid
    </desc>
    <values>
      <value>$OCN_DOMAIN_MESH</value>
    </values>
  </entry>

  <!-- ======================================== -->
  <!--  ROF attributes                          -->
  <!-- ======================================== -->

  <entry id="Verbosity@rof_attributes" modify_via_xml="ESMF_VERBOSITY_LEVEL">
    <type>char</type>
    <category>nuopc</category>
    <group>ROF_attributes</group>
    <valid_values>off,low,high,max</valid_values>
    <values>
      <value>$ESMF_VERBOSITY_LEVEL</value>
    </values>
  </entry>
  <entry id="mesh_rof" modify_via_xml="ROF_DOMAIN_MESH">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>ROF_attributes</group>
    <desc>
      MESH description of rof grid
    </desc>
    <values>
      <value>$ROF_DOMAIN_MESH</value>
    </values>
  </entry>

  <!-- ======================================== -->
  <!--  WAV attributes                          -->
  <!-- ======================================== -->

  <entry id="Verbosity@wav_attributes" modify_via_xml="ESMF_VERBOSITY_LEVEL">
    <type>char</type>
    <category>nuopc</category>
    <valid_values>off,low,high,max</valid_values>
    <group>WAV_attributes</group>
    <values>
      <value>$ESMF_VERBOSITY_LEVEL</value>
    </values>
  </entry>
  <entry id="mesh_wav" modify_via_xml="WAV_DOMAIN_MESH">
    <type>char</type>
    <category>mapping</category>
    <input_pathname>abs</input_pathname>
    <group>WAV_attributes</group>
    <desc>
      MESH description of wav grid
    </desc>
    <values>
      <value>$WAV_DOMAIN_MESH</value>
    </values>
  </entry>

  <!-- =========================== -->
  <!-- group modelio               -->
  <!-- =========================== -->

  <entry id="pio_async_interface">
    <type>logical</type>
    <category>pio</category>
    <group>modelio</group>
    <desc>
      future asynchronous IO capability (not currently supported).
      If pio_async_interface is .true. or {component}_PIO_* variable is not set or set to -99
      the component variable will be set using the pio_* value.
      default: .false.
    </desc>
    <values>
    <value component="cpl">$CPL_PIO_ASYNC_INTERFACE</value>
    <value component="atm">$ATM_PIO_ASYNC_INTERFACE</value>
    <value component="lnd">$LND_PIO_ASYNC_INTERFACE</value>
    <value component="ocn">$OCN_PIO_ASYNC_INTERFACE</value>
    <value component="ice">$ICE_PIO_ASYNC_INTERFACE</value>
    <value component="rof">$ROF_PIO_ASYNC_INTERFACE</value>
    <value component="glc">$GLC_PIO_ASYNC_INTERFACE</value>
    <value component="wav">$WAV_PIO_ASYNC_INTERFACE</value>
    <value component="esp">.false.</value>
    </values>
  </entry>

  <entry id="pio_stride" modify_via_xml="PIO_STRIDE">
    <type>integer</type>
    <category>pio</category>
    <group>modelio</group>
    <desc>
      stride of tasks in pio used generically, component based value takes precedent.
    </desc>
    <values>
    <value component="cpl">$CPL_PIO_STRIDE</value>
    <value component="atm">$ATM_PIO_STRIDE</value>
    <value component="lnd">$LND_PIO_STRIDE</value>
    <value component="ocn">$OCN_PIO_STRIDE</value>
    <value component="ice">$ICE_PIO_STRIDE</value>
    <value component="rof">$ROF_PIO_STRIDE</value>
    <value component="glc">$GLC_PIO_STRIDE</value>
    <value component="wav">$WAV_PIO_STRIDE</value>
    <value component="esp">-99</value>
    </values>
  </entry>

  <entry id="pio_root" modify_via_xml="PIO_ROOT">
    <type>integer</type>
    <category>pio</category>
    <group>modelio</group>
    <desc>
      io task root in pio used generically, component based value takes precedent.
    </desc>
    <values>
    <value component="cpl">$CPL_PIO_ROOT</value>
    <value component="atm">$ATM_PIO_ROOT</value>
    <value component="lnd">$LND_PIO_ROOT</value>
    <value component="ocn">$OCN_PIO_ROOT</value>
    <value component="ice">$ICE_PIO_ROOT</value>
    <value component="rof">$ROF_PIO_ROOT</value>
    <value component="glc">$GLC_PIO_ROOT</value>
    <value component="wav">$WAV_PIO_ROOT</value>
    <value component="esp">-99</value>
    </values>
  </entry>

  <entry id="pio_rearranger" modify_via_xml="PIO_REARRANGER">
    <type>integer</type>
    <category>pio</category>
    <group>modelio</group>
    <valid_values>-99,1,2</valid_values>
    <desc>
      Rearranger method for pio 1=box, 2=subset.
    </desc>
    <values>
    <value component="cpl">$CPL_PIO_REARRANGER</value>
    <value component="atm">$ATM_PIO_REARRANGER</value>
    <value component="lnd">$LND_PIO_REARRANGER</value>
    <value component="ocn">$OCN_PIO_REARRANGER</value>
    <value component="ice">$ICE_PIO_REARRANGER</value>
    <value component="rof">$ROF_PIO_REARRANGER</value>
    <value component="glc">$GLC_PIO_REARRANGER</value>
    <value component="wav">$WAV_PIO_REARRANGER</value>
    <value component="esp">-99</value>
    </values>
  </entry>

  <entry id="pio_numiotasks" modify_via_xml="PIO_NUMTASKS">
    <type>integer</type>
    <category>pio</category>
    <group>modelio</group>
    <desc>
      number of io tasks in pio used generically, component based value takes precedent.
    </desc>
    <values>
    <value component="cpl">$CPL_PIO_NUMTASKS</value>
    <value component="atm">$ATM_PIO_NUMTASKS</value>
    <value component="lnd">$LND_PIO_NUMTASKS</value>
    <value component="ocn">$OCN_PIO_NUMTASKS</value>
    <value component="ice">$ICE_PIO_NUMTASKS</value>
    <value component="rof">$ROF_PIO_NUMTASKS</value>
    <value component="glc">$GLC_PIO_NUMTASKS</value>
    <value component="wav">$WAV_PIO_NUMTASKS</value>
    <value component="esp">-99</value>
    </values>
  </entry>

  <entry id="pio_typename" modify_via_xml="PIO_TYPENAME">
    <type>char*64</type>
    <category>pio</category>
    <group>modelio</group>
    <valid_values>netcdf,pnetcdf,netcdf4p,netcdf4c,default,nothing</valid_values>
    <desc>
      io type in pio used generically, component based value takes precedent.
      valid values: netcdf, pnetcdf, netcdf4p, netcdf4c, default
    </desc>
    <values>
    <value component="cpl">$CPL_PIO_TYPENAME</value>
    <value component="atm">$ATM_PIO_TYPENAME</value>
    <value component="lnd">$LND_PIO_TYPENAME</value>
    <value component="ocn">$OCN_PIO_TYPENAME</value>
    <value component="ice">$ICE_PIO_TYPENAME</value>
    <value component="rof">$ROF_PIO_TYPENAME</value>
    <value component="glc">$GLC_PIO_TYPENAME</value>
    <value component="wav">$WAV_PIO_TYPENAME</value>
    <value component="esp">nothing</value>
    </values>
  </entry>

  <entry id="pio_netcdf_format" modify_via_xml="PIO_NETCDF_FORMAT">
    <type>char*64</type>
    <category>pio</category>
    <group>modelio</group>
    <valid_values>classic,64bit_offset,64bit_data</valid_values>
    <desc>
      format of netcdf files created by pio, ignored if
      PIO_TYPENAME is netcdf4p or netcdf4c.  64bit_data only
      supported in netcdf 4.4.0 or newer
    </desc>
    <values>
    <value component="cpl">$CPL_PIO_NETCDF_FORMAT</value>
    <value component="atm">$ATM_PIO_NETCDF_FORMAT</value>
    <value component="lnd">$LND_PIO_NETCDF_FORMAT</value>
    <value component="ocn">$OCN_PIO_NETCDF_FORMAT</value>
    <value component="ice">$ICE_PIO_NETCDF_FORMAT</value>
    <value component="rof">$ROF_PIO_NETCDF_FORMAT</value>
    <value component="glc">$GLC_PIO_NETCDF_FORMAT</value>
    <value component="wav">$WAV_PIO_NETCDF_FORMAT</value>
    <value component="esp">$ESP_PIO_NETCDF_FORMAT</value>
    </values>
  </entry>

  <entry id="diro">
    <type>char*256</type>
    <category>modelio</category>
    <group>modelio</group>
    <desc>directory for output log files</desc>
    <values>
      <value>UNSET</value>
    </values>
  </entry>

  <entry id="logfile">
    <type>char*256</type>
    <category>modelio</category>
    <group>modelio</group>
    <desc>name of component output log file</desc>
    <values>
    <value>UNSET</value>
    </values>
  </entry>
</entry_id>