absolem.yaml

points:
  zones:
    matrix:
      anchor:
        rotate: 5
      columns:
        pinky:
          rows:
            home:
              bind: [,15,-1]
            top:
              bind: [,15,-1]
          key:
            column_net: P4
            column_mark: P
        ring:
          rotate: -5
          # hinge at the bottom right corner
          # of the bottom pinky's 14x14 hole
          # for historical reasons...
          origin: [-12, -19]
          stagger: 12
          rows:
            bottom:
              bind: [,,,10]
            home:
              bind: [,10]
            top:
              bind: [,10]
          key:
            column_net: P5
            column_mark: R
        middle:
          stagger: 5
          rows:
            bottom:
              bind: [,10,,10]
            home:
              bind: [,10,,10]
          key:
            column_net: P7
            column_mark: M
        index:
          stagger: -6
          rows:
            bottom:
              bind: [,10]
            home:
              bind: [,,,10]
            top:
              bind: [,,,10]
          key:
            column_net: P8
            column_mark: X
        inner:
          stagger: -2
          rows:
            bottom:
              bind: [,,10,]
            home:
              bind: [,,,10]
            top:
              bind: [,,,10]
          key:
            column_net: P1
            column_mark: I
      rows:
        bottom:
          bind: [10]
          row_net: P16
          row_mark: LB
          mirror:
            row_net: P9
            row_mark: RB
        home:
          bind: [10]
          row_net: P15
          row_mark: LH
          mirror:
            row_net: P6
            row_mark: RH
        top:
          row_net: P20
          row_mark: LT
          mirror:
            row_net: P2
            row_mark: RT
    s19:
      $extends: points.zones.matrix
      columns:
        pinky:
          rows:
            bottom:
              footprints:
                diode:
                  anchor:
                    shift: [,12]
            home:
              footprints:
                diode:
                  anchor:
                    shift: [,6]
            top:
              footprints:
                row_ext:
                  anchor:
                    shift: [, -10]
                extra_column:
                  type: pad
                  anchor:
                    shift: [-4, 4]
                  nets:
                    net: P3
                  params:
                    width: 2
                    height: 2
                    front: false
                    text: E
                    align: right
          key:
            footprints:
              row_ext:
                type: pad
                anchor:
                  shift: [-4, -4]
                nets:
                  net: =row_net
                params:
                  width: 2
                  height: 2
                  front: false
                  text: =row_mark
                  align: right
        ring:
          rows:
            bottom:
              footprints:
                diode:
                  anchor:
                    shift: [,5]
            home:
              footprints:
                diode:
                  anchor:
                    shift: [,2.5]
        middle:
          rows:
            top:
              footprints:
                diode:
                  anchor:
                    shift: [,-6]
            home:
              footprints:
                diode:
                  anchor:
                    shift: [,-3]
        index:
          rows:
            bottom:
              footprints:
                diode:
                  anchor:
                    shift: [-8.25,6]
            home:
              footprints:
                diode:
                  anchor:
                    shift: [-8.25,3]
            top:
              footprints:
                diode:
                  anchor:
                    shift: [-8.25,]
      rows:
        top:
          footprints:
            mx:
              anchor:
                rotate: 180
            alps:
              anchor:
                rotate: 180
            choc:
              anchor:
                rotate: 180
            col_ext:
              type: pad
              anchor:
                shift: [4, 4]
              nets:
                net: =column_net
              params:
                width: 2
                height: 2
                front: false
                text: =column_mark
        bottom:
          footprints:
            diode:
              anchor:
                rotate: 270
            col_ext:
              type: pad
              anchor:
                shift: [4, -4]
              nets:
                net: =column_net
              params:
                width: 2
                height: 2
                front: false
                text: =column_mark
      key:
        tags:
          s19: true
        footprints: &quad
          mx:
            type: mx
            nets:
              from: =colrow
              to: =column_net
          alps:
            type: alps
            nets:
              from: =colrow
              to: =column_net
          <<: &choc
            choc:
              type: choc
              nets:
                from: =colrow
                to: =column_net
          diode:
            type: diode
            anchor:
              rotate: 90
              shift: [8.25, 0]
            nets:
              from: =colrow
              to: =row_net
        mirror:
          footprints: &quad_mirror
            mx:
              nets:
                from: =column_net
                to: =colrow
            alps:
              nets:
                from: =column_net
                to: =colrow
            <<: &choc_mirror
              choc:
                nets:
                  from: =column_net
                  to: =colrow
    s18:
      $extends: points.zones.matrix
      columns:
        pinky:
          stagger: 1
        ring:
          origin: [-12, -20]
      rows:
        top:
          footprints:
            choc:
              anchor:
                rotate: 180
      key:
        padding: 18
        tags:
          s18: true
        footprints: *choc
        mirror:
          footprints: *choc_mirror
    thumbfan:
      anchor:
        ref: matrix_inner_bottom
        shift: [-7, -19]
      columns:
        near:
          rows:
            thumb:
              bind: [10,5,,]
              column_net: P7
              tags:
                classic: true
              footprints:
                choc:
                  anchor:
                    rotate: 180
                diode:
                  anchor:
                    shift: [8,]
                row_ext:
                  type: pad
                  anchor:
                    shift: [-3, 9]
                  nets:
                    net: =row_net
                  params:
                    width: 2
                    height: 2
                    front: false
                    text: =row_mark
                    align: right
        home:
          spread: 21.25
          rotate: -28
          origin: [-11.75, -9]
          rows:
            thumb:
              bind: [,10,,15]
              column_net: P8
              tags:
                classic: true
                uniform: true
              footprints:
                diode:
                  anchor:
                    shift: [8,]
        far:
          spread: 21.25
          rotate: -28
          origin: [-9.5, -9]
          rows:
            thumb:
              bind: [-1,,,5]
              column_net: P1
              tags:
                classic: true
              footprints:
                choc:
                  anchor:
                    rotate: 180
                diode:
                  anchor:
                    shift: [-4,]
                    rotate: 0
              mirror:
                footprints:
                  diode:
                    anchor:
                      rotate: 180
      rows:
        thumb:
          row_net: P10
          row_mark: LF
          footprints:
            diode:
              anchor:
                shift: [0, 9]
                rotate: 180
          mirror:
            row_net: P19
            row_mark: RF
            footprints:
              diode:
                anchor:
                  rotate: 0
      key:
        footprints: *quad
        mirror: *quad_mirror
    unifar:
      anchor:
        ref: thumbfan_home_thumb
      columns:
        home_again:
          key:
            skip: true
        far:
          rotate: -28
          origin: [-9.5, -9]
          rows:
            thumb:
              bind: [-1,,,5]
          key:
            column_net: P1
            footprints:
              choc:
                anchor:
                  rotate: 180
              diode: $unset
            mirror:
              footprints:
                diode: $unset
            tags:
              uniform: true
      rows:
        thumb:
          row_net: P10
          mirror:
            row_net: P19
      key:
        footprints: *quad
        mirror: *quad_mirror
    uninear:
      anchor:
        ref: thumbfan_home_thumb
      columns:
        home_again:
          key:
            skip: true
        near:
          spread: -19
          rotate: 28
          origin: [9.5, -9]
          rows:
            thumb:
              bind: [10,5,,]
          key:
            column_net: P7
            footprints:
              choc:
                anchor:
                  rotate: 180
              diode: $unset
            mirror:
              footprints:
                diode: $unset
            tags:
              uniform: true
      rows:
        thumb:
          row_net: P10
          mirror:
            row_net: P19
      key:
        footprints: *quad
        mirror: *quad_mirror
  key:
    bind: [0,0,0,0]
  rotate: -20
  mirror:
    ref: matrix_pinky_home
    distance: 223.7529778
outlines:
  glue:
    classic_s19:
      top:
        left:
          ref: matrix_inner_top
          shift: [, 0.5 sy]
        right:
          ref: mirror_matrix_inner_top
          shift: [, 0.5 sy]
      bottom:
        left:
          ref: thumbfan_far_thumb
          shift: [0.5 sx, 0]
          rotate: 90
        right:
          ref: mirror_thumbfan_far_thumb
          shift: [0.5 sx, 0]
          rotate: 90
      waypoints:
        - percent: 50
          width: 50
        - percent: 90
          width: 25
    uniform_s19:
      $extends: outlines.glue.classic_s19
      bottom:
        left:
          ref: unifar_far_thumb
        right:
          ref: mirror_unifar_far_thumb
    classic_s18:
      $extends: outlines.glue.classic_s19
      top:
        left:
          ref: s18_inner_top
        right:
          ref: mirror_s18_inner_top
    uniform_s18:
      $extends:
        - outlines.glue.uniform_s19
        - outlines.glue.classic_s18
  exports:
    classic_s19_pcb:
      main:
        type: keys
        side: both
        tags:
          - s19
          - classic
        glue: classic_s19
        size: 13.5
        corner: .5
    uniform_s19_pcb:
      $extends: outlines.exports.classic_s19_pcb
      main:
        tags:
          - s19
          - uniform
        glue: uniform_s19
    uniform_s18_pcb:
      $extends: outlines.exports.uniform_s19_pcb
      main:
        tags:
          - s18
          - uniform
        glue: uniform_s18
    mounting_holes:
      ring_top:
        type: circle
        anchor:
          ref: matrix_ring_home
          shift: [-10, 5]
        radius: 2.25
        mirror: true
      ring_bottom:
        type: circle
        anchor:
          ref: matrix_ring_home
          shift: [-9, -9]
        radius: 2.25
        mirror: true
        operation: stack
      index_top:
        type: circle
        anchor:
          ref: matrix_index_home
          shift: [9.5, 9.5]
        radius: 2.25
        mirror: true
        operation: stack
      index_bottom:
        type: circle
        anchor:
          ref: matrix_index_home
          shift: [9.5, -9.5]
        radius: 2.25
        mirror: true
        operation: stack
      thumb_near:
        type: circle
        anchor:
          ref: thumbfan_home_thumb
          shift: [-12, 2]
        radius: 2.25
        mirror: true
        operation: stack
      thumb_far:
        type: circle
        anchor:
          ref: thumbfan_home_thumb
          shift: [12, 2]
        radius: 2.25
        mirror: true
        operation: stack
      middle:
        type: circle
        anchor:
          ref: thumbfan_home_thumb
          shift: [-8, 19]
        radius: 2.25
        mirror: true
        operation: stack
    screw_holes:
      $extends: outlines.exports.mounting_holes
      ring_top:
        radius: 1
      ring_bottom:
        radius: 1
      index_top:
        radius: 1
      index_bottom:
        radius: 1
      thumb_near:
        radius: 1
      thumb_far:
        radius: 1
      middle:
        radius: 1
    reset_hole:
      main:
        type: circle
        anchor:
          ref:
            - s18_inner_top
            - mirror_s18_inner_top
          shift: [0, -17]
        radius: 1
    led_hole:
      main:
        type: circle
        anchor:
          ref:
            - matrix_inner_bottom
            - mirror_matrix_inner_bottom
          shift: [0, -48]
        radius: 1
    controller_cutout:
      main:
        type: rectangle
        anchor:
          ref:
            - s18_inner_top
            - mirror_s18_inner_top
          shift: [-10, -5]
        size: [20, 10]
    intersected_outline:
      - +classic_s19_pcb
      - ~uniform_s18_pcb
      - -controller_cutout
      - -mounting_holes
    normal_middle: &middle
      raw:
        type: keys
        side: middle
        tags:
          - s19
          - classic
        glue: classic_s19
        size: 24
      helper1:
        type: rectangle
        size: [25, 5]
        anchor:
          ref: thumbfan_home_thumb
          shift: [0, 12]
        mirror: true
      helper2:
        type: rectangle
        size: [25, 5]
        anchor:
          ref: thumbfan_far_thumb
          shift: [-25, 12]
        mirror: true
      outer_bounds:
        type: outline
        name: classic_s19_pcb
        operation: intersect
    classic_s19_switches:
      main:
        type: keys
        side: both
        tags:
          - s19
          - classic
        glue: classic_s19
        size: 14
        bound: false
    classic_s19_outer:
      main:
        type: keys
        side: both
        tags:
          - s19
          - classic
        glue: classic_s19
        size: 18
        corner: .5
    classic_s19_inner:
      main:
        type: keys
        side: both
        tags:
          - s19
          - classic
        glue: classic_s19
        size: 14
    classic_s19_body:
      - +classic_s19_outer
      - -classic_s19_inner
    classic_s19_plate:
      main:
        type: keys
        side: both
        tags:
          - s19
          - classic
        size: 36
      cut_to_size:
        type: outline
        name: classic_s19_outer
        operation: intersect
      clean_up_middle:
        type: outline
        name: normal_middle
        operation: subtract
      controller_cutout:
        type: outline
        name: controller_cutout
        operation: subtract
      screw_holes:
        type: outline
        name: screw_holes
        operation: subtract
      switches:
        type: outline
        name: classic_s19_switches
        operation: subtract
    classic_s19_bottom:
      base:
        type: outline
        name: classic_s19_outer
      screw_holes:
        type: outline
        name: screw_holes
        operation: subtract
      reset:
        type: outline
        name: reset_hole
        operation: subtract
    classic_s19_top: 
      <<: *middle
      outer_bounds:
        type: outline
        name: classic_s19_outer
        operation: intersect
      screw_holes:
        type: outline
        name: screw_holes
        operation: subtract
      led:
        type: outline
        name: led_hole
        operation: subtract
    bigger_middle:
      <<: *middle
      raw:
        type: keys
        side: middle
        tags:
          - s19
          - classic
        glue: classic_s19
        size: 20
      outer_bounds:
        type: outline
        name: classic_s19_outer
        operation: intersect
      helper1:
        type: rectangle
        size: [25, 5]
        anchor:
          ref: thumbfan_home_thumb
          shift: [0, 10]
        mirror: true
      helper2:
        type: rectangle
        size: [25, 5]
        anchor:
          ref: thumbfan_far_thumb
          shift: [-25, 10]
        mirror: true
    smaller_middle:
      <<: *middle
      raw:
        type: keys
        side: middle
        tags:
          - s19
          - classic
        glue: classic_s19
        size: 28
      outer_bounds:
        type: outline
        name: classic_s19_pcb
        operation: intersect
      helper1:
        type: rectangle
        size: [25, 5]
        anchor:
          ref: thumbfan_home_thumb
          shift: [0, 14]
        mirror: true
      helper2:
        type: rectangle
        size: [25, 5]
        anchor:
          ref: thumbfan_far_thumb
          shift: [-25, 14]
        mirror: true
    battery_bar_long:
      bar:
        type: rectangle
        anchor:
          ref:
            - thumbfan_near_thumb
            - mirror_thumbfan_near_thumb
          shift: [-100, -1.5]
        size: [200, 10]
    battery_bar:
      bar:
        type: outline
        name: battery_bar_long
      cut:
        type: outline
        name: normal_middle
        operation: intersect
      hole:
        type: outline
        name: mounting_holes
        operation: subtract
    battery_bar_lip:
      base:
        type: outline
        name: battery_bar
      cut:
        type: outline
        name: smaller_middle
        operation: subtract
    upper_case:
      base:
        type: outline
        name: bigger_middle
      cut:
        type: outline
        name: smaller_middle
        operation: subtract
    upper_case_lip:
      base:
        type: outline
        name: normal_middle
      back_cut:
        type: rectangle
        anchor:
          ref:
            - matrix_inner_top
            - mirror_matrix_inner_top
          shift: [-100, 0]
        size: 200
        operation: subtract
      front_cut:
        type: rectangle
        anchor:
          ref:
            - thumbfan_far_thumb
            - mirror_thumbfan_far_thumb
          shift: [-100, -200]
        size: 200
        operation: subtract
      mid_cut:
        type: outline
        name: smaller_middle
        operation: subtract
      battery_cut:
        type: outline
        name: battery_bar_long
        operation: subtract
    usb_cutout:
      base:
        type: rectangle
        anchor:
          ref:
            - matrix_inner_top
            - mirror_matrix_inner_top
          shift: [-10, -10]
        size: [20, 11]
        corner: 2
pcbs:
  main:
    outlines:
      edge:
        outline: intersected_outline
        layer: Edge.Cuts
      middle:
        outline: normal_middle
        layer: F.SilkS
    footprints:
      mcu:
        type: promicro
        anchor:
          ref:
            - s18_inner_top
            - mirror_s18_inner_top
          shift: [0, -23]
          rotate: 270
      slider:
        type: slider
        anchor:
          ref:
            - s18_inner_top
            - mirror_s18_inner_top
          shift: [0, -7.5]
        nets:
          from: RAW
          to: RAWER
        params:
          side: B
      reset:
        type: button
        anchor:
          ref:
            - s18_inner_top
            - mirror_s18_inner_top
          shift: [0, -17]
          rotate: 90
        nets:
          from: RST
          to: GND
        params:
          side: B
      extra_row_left:
        type: pad
        anchor:
          ref:
            - s18_inner_top
            - mirror_s18_inner_top
          shift: [-15, -10]
        nets:
          net: P21
        params:
          width: 3
          height: 3
          front: false
          text: LN
          align: right
      extra_row_right:
        type: pad
        anchor:
          ref:
            - s18_inner_top
            - mirror_s18_inner_top
          shift: [15, -10]
        nets:
          net: P0
        params:
          width: 3
          height: 3
          front: false
          text: RN
      battery:
        type: jstph
        anchor:
          ref:
            - matrix_inner_bottom
            - mirror_matrix_inner_bottom
          shift: [0, -43]
          rotate: 180
        nets:
          pos: RAWER
          neg: GND
      led:
        type: rgb
        anchor:
          ref:
            - matrix_inner_bottom
            - mirror_matrix_inner_bottom
          shift: [0, -48]
        nets:
          din: P18
          dout: ''
cases:
  usb_cutout:
    - name: usb_cutout
      extrude: 200
      rotate: [-90, 0, 0]
      shift: [0, 0, -3.5]
  classic_s19_minimal_lower:
    - name: classic_s19_body
      extrude: 8
      shift: [0, 0, -9]
    - -usb_cutout
  classic_s19_minimal_upper:
    - name: upper_case
      extrude: 5
    - name: upper_case_lip
      extrude: 2
      shift: [0, 0, -2]
    - -usb_cutout
  classic_s19_minimal_battery:
    - name: battery_bar
      extrude: 1.5
    - name: battery_bar_lip
      extrude: 3.5
      shift: [, , 1.5]