cv181x_milkv_duos_sd.dts

/dts-v1/;

/memreserve/	0x0000000080000000 0x0000000000080000;
/ {
	compatible = "cvitek,cv181x";
	#size-cells = <0x02>;
	#address-cells = <0x02>;
	model = "Milk-V DuoS";

	top_misc_ctrl@3000000 {
		compatible = "syscon";
		reg = <0x00 0x3000000 0x00 0x8000>;
	};

	clk-reset-controller {
		#reset-cells = <0x01>;
		compatible = "cvitek,clk-reset";
		reg = <0x00 0x3002000 0x00 0x08>;
	};

	oscillator {
		#clock-cells = <0x00>;
		compatible = "fixed-clock";
		clock-frequency = <0x17d7840>;
		clock-output-names = "osc";
		phandle = <0x01>;
	};

	clock-controller {
		compatible = "cvitek,cv181x-clk";
		reg = <0x00 0x3002000 0x00 0x1000>;
		clocks = <0x01>;
		#clock-cells = <0x01>;
		phandle = <0x02>;
	};

	reset-controller {
		#reset-cells = <0x01>;
		compatible = "cvitek,reset";
		reg = <0x00 0x3003000 0x00 0x10>;
		phandle = <0x03>;
	};

	restart-controller {
		compatible = "cvitek,restart";
		reg = <0x00 0x5025000 0x00 0x2000>;
	};

	tpu {
		compatible = "cvitek,tpu";
		reg-names = "tdma\0tiu";
		reg = <0x00 0xc100000 0x00 0x1000 0x00 0xc101000 0x00 0x1000>;
		clocks = <0x02 0x0f 0x02 0x10>;
		clock-names = "clk_tpu_axi\0clk_tpu_fab";
		resets = <0x03 0x07 0x03 0x08 0x03 0x09>;
		reset-names = "res_tdma\0res_tpu\0res_tpusys";
		interrupts = <0x4b 0x04 0x4c 0x04>;
		interrupt-names = "tiu_irq\0tdma_irq";
		interrupt-parent = <0x04>;
	};

	mon {
		compatible = "cvitek,mon";
		reg-names = "pcmon\0ddr_ctrl\0ddr_phyd\0ddr_aximon\0ddr_top";
		reg = <0x00 0x1040000 0x00 0x1000 0x00 0x8004000 0x00 0x1000 0x00 0x8006000 0x00 0x1000 0x00 0x8008000 0x00 0x1000 0x00 0x800a000 0x00 0x1000>;
		interrupts = <0x5d 0x04>;
		interrupt-names = "mon_irq";
		interrupt-parent = <0x04>;
	};

	wiegand0 {
		compatible = "cvitek,wiegand";
		reg-names = "wiegand";
		reg = <0x00 0x3030000 0x00 0x1000>;
		clocks = <0x02 0x81 0x02 0x82>;
		clock-names = "clk_wgn\0clk_wgn1";
		resets = <0x03 0x56>;
		reset-names = "res_wgn";
		interrupts = <0x40 0x04>;
		interrupt-parent = <0x04>;
	};

	wiegand1 {
		compatible = "cvitek,wiegand";
		reg-names = "wiegand";
		reg = <0x00 0x3031000 0x00 0x1000>;
		clocks = <0x02 0x81 0x02 0x83>;
		clock-names = "clk_wgn\0clk_wgn1";
		resets = <0x03 0x57>;
		reset-names = "res_wgn";
		interrupts = <0x41 0x04>;
		interrupt-parent = <0x04>;
	};

	wiegand2 {
		compatible = "cvitek,wiegand";
		reg-names = "wiegand";
		reg = <0x00 0x3032000 0x00 0x1000>;
		clocks = <0x02 0x81 0x02 0x84>;
		clock-names = "clk_wgn\0clk_wgn1";
		resets = <0x03 0x58>;
		reset-names = "res_wgn";
		interrupts = <0x42 0x04>;
		interrupt-parent = <0x04>;
	};

	saradc {
		compatible = "cvitek,saradc";
		reg-names = "top_domain_saradc\0rtc_domain_saradc";
		reg = <0x00 0x30f0000 0x00 0x1000 0x00 0x502c000 0x00 0x1000>;
		clocks = <0x02 0x15>;
		clock-names = "clk_saradc";
		resets = <0x03 0x34>;
		reset-names = "res_saradc";
		interrupts = <0x64 0x01>;
		interrupt-parent = <0x04>;
	};

	rtc {
		compatible = "cvitek,rtc";
		reg = <0x00 0x5026000 0x00 0x1000 0x00 0x5025000 0x00 0x1000>;
		clocks = <0x02 0x13>;
		clock-names = "clk_rtc";
		interrupts = <0x11 0x04>;
		interrupt-parent = <0x04>;
	};

	sysdma_remap {
		compatible = "cvitek,sysdma_remap";
		reg = <0x00 0x3000154 0x00 0x10>;
		ch-remap = <0x00 0x05 0x02 0x03 0x26 0x26 0x04 0x07>;
		int_mux_base = <0x3000298>;
		int_mux = <0x7fc00>;
	};

	dma@0x4330000 {
		compatible = "snps,dmac-bm";
		reg = <0x00 0x4330000 0x00 0x1000>;
		clock-names = "clk_sdma_axi";
		clocks = <0x02 0x2c>;
		dma-channels = [08];
		#dma-cells = <0x03>;
		dma-requests = [10];
		chan_allocation_order = [00];
		chan_priority = [01];
		block_size = <0x400>;
		dma-masters = [02];
		data-width = <0x04 0x04>;
		axi_tr_width = <0x04>;
		block-ts = <0x0f>;
		interrupts = <0x1d 0x04>;
		interrupt-parent = <0x04>;
		phandle = <0x0d>;
	};

	cv-wd@0x3010000 {
		compatible = "snps,dw-wdt";
		reg = <0x00 0x3010000 0x00 0x1000>;
		resets = <0x03 0x30>;
		clocks = <0x05>;
		interrupts = <0x3a 0x04>;
	};

	pwm@3060000 {
		compatible = "cvitek,cvi-pwm";
		reg = <0x00 0x3060000 0x00 0x1000>;
		clocks = <0x02 0x33>;
		#pwm-cells = <0x01>;
	};

	pwm@3061000 {
		compatible = "cvitek,cvi-pwm";
		reg = <0x00 0x3061000 0x00 0x1000>;
		clocks = <0x02 0x33>;
		#pwm-cells = <0x02>;
	};

	pwm@3062000 {
		compatible = "cvitek,cvi-pwm";
		reg = <0x00 0x3062000 0x00 0x1000>;
		clocks = <0x02 0x33>;
		#pwm-cells = <0x03>;
	};

	pwm@3063000 {
		compatible = "cvitek,cvi-pwm";
		reg = <0x00 0x3063000 0x00 0x1000>;
		clocks = <0x02 0x33>;
		#pwm-cells = <0x04>;
	};

	pclk {
		#clock-cells = <0x00>;
		compatible = "fixed-clock";
		clock-frequency = <0x17d7840>;
		phandle = <0x05>;
	};

	cvi-spif@10000000 {
		compatible = "cvitek,cvi-spif";
		bus-num = <0x00>;
		reg = <0x00 0x10000000 0x00 0x10000000>;
		reg-names = "spif";
		sck-div = <0x03>;
		sck_mhz = <0x12c>;
		spi-max-frequency = <0x47868c0>;
		interrupts = <0x5f 0x04>;
		interrupt-parent = <0x04>;

		spiflash {
			compatible = "jedec,spi-nor";
			spi-rx-bus-width = <0x04>;
			spi-tx-bus-width = <0x04>;
		};
	};

	spi0@04180000 {
		compatible = "snps,dw-apb-ssi";
		reg = <0x00 0x4180000 0x00 0x10000>;
		clocks = <0x02 0x71>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;
		interrupts = <0x36 0x04>;
		interrupt-parent = <0x04>;
		status = "disabled";
		num-cs = <0x01>;

		spidev@0 {
			compatible = "rohm,dh2228fv";
			spi-max-frequency = <0xf4240>;
			reg = <0x00>;
		};
	};

	spi1@04190000 {
		compatible = "snps,dw-apb-ssi";
		reg = <0x00 0x4190000 0x00 0x10000>;
		clocks = <0x02 0x71>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;
		interrupts = <0x37 0x04>;
		interrupt-parent = <0x04>;
		status = "disabled";
		num-cs = <0x01>;

		spidev@0 {
			compatible = "rohm,dh2228fv";
			spi-max-frequency = <0xf4240>;
			reg = <0x00>;
		};
	};

	spi2@041A0000 {
		compatible = "snps,dw-apb-ssi";
		reg = <0x00 0x41a0000 0x00 0x10000>;
		clocks = <0x02 0x71>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;
		interrupts = <0x38 0x04>;
		interrupt-parent = <0x04>;
		status = "disabled";
		num-cs = <0x01>;

		spidev@0 {
			compatible = "rohm,dh2228fv";
			spi-max-frequency = <0xf4240>;
			reg = <0x00>;
		};
	};

	spi3@041B0000 {
		compatible = "snps,dw-apb-ssi";
		reg = <0x00 0x41b0000 0x00 0x10000>;
		clocks = <0x02 0x71>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;
		interrupts = <0x39 0x04>;
		interrupt-parent = <0x04>;
		status = "okay";
		num-cs = <0x01>;

		spidev@0 {
			compatible = "rohm,dh2228fv";
			spi-max-frequency = <0xf4240>;
			reg = <0x00>;
			status = "okay";
		};
	};

	serial@04140000 {
		compatible = "snps,dw-apb-uart";
		reg = <0x00 0x4140000 0x00 0x1000>;
		clock-frequency = <0x17d7840>;
		reg-shift = <0x02>;
		reg-io-width = <0x04>;
		status = "okay";
		interrupts = <0x2c 0x04>;
		interrupt-parent = <0x04>;
	};

	serial@04150000 {
		compatible = "snps,dw-apb-uart";
		reg = <0x00 0x4150000 0x00 0x1000>;
		clock-frequency = <0x17d7840>;
		reg-shift = <0x02>;
		reg-io-width = <0x04>;
		status = "disabled";
		interrupts = <0x2d 0x04>;
		interrupt-parent = <0x04>;
	};

	serial@04160000 {
		compatible = "snps,dw-apb-uart";
		reg = <0x00 0x4160000 0x00 0x1000>;
		clock-frequency = <0x17d7840>;
		reg-shift = <0x02>;
		reg-io-width = <0x04>;
		status = "disabled";
		interrupts = <0x2e 0x04>;
		interrupt-parent = <0x04>;
	};

	serial@04170000 {
		compatible = "snps,dw-apb-uart";
		reg = <0x00 0x4170000 0x00 0x1000>;
		clock-frequency = <0x17d7840>;
		reg-shift = <0x02>;
		reg-io-width = <0x04>;
		status = "disabled";
		interrupts = <0x2f 0x04>;
		interrupt-parent = <0x04>;
	};

	serial@041C0000 {
		compatible = "snps,dw-apb-uart";
		reg = <0x00 0x41c0000 0x00 0x1000>;
		clock-frequency = <0x17d7840>;
		reg-shift = <0x02>;
		reg-io-width = <0x04>;
		status = "okay";
		interrupts = <0x30 0x04>;
		interrupt-parent = <0x04>;
	};

	gpio@03020000 {
		compatible = "snps,dw-apb-gpio";
		reg = <0x00 0x3020000 0x00 0x1000>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;

		gpio-controller@0 {
			compatible = "snps,dw-apb-gpio-port";
			bank-name = "porta";
			gpio-controller;
			#gpio-cells = <0x02>;
			snps,nr-gpios = <0x20>;
			reg = <0x00>;
			interrupt-controller;
			interrupts = <0x3c 0x04>;
			interrupt-parent = <0x04>;
			phandle = <0x0b>;

			wifi_pwr {
				gpio-hog;
				gpios = <0x0f 0x00>;
				output-high;
			};
		};
	};

	gpio@03021000 {
		compatible = "snps,dw-apb-gpio";
		reg = <0x00 0x3021000 0x00 0x1000>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;

		gpio-controller@1 {
			compatible = "snps,dw-apb-gpio-port";
			bank-name = "portb";
			gpio-controller;
			#gpio-cells = <0x02>;
			snps,nr-gpios = <0x20>;
			reg = <0x00>;
			interrupt-controller;
			interrupts = <0x3d 0x04>;
			interrupt-parent = <0x04>;
			phandle = <0x11>;
		};
	};

	gpio@03022000 {
		compatible = "snps,dw-apb-gpio";
		reg = <0x00 0x3022000 0x00 0x1000>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;

		gpio-controller@2 {
			compatible = "snps,dw-apb-gpio-port";
			bank-name = "portc";
			gpio-controller;
			#gpio-cells = <0x02>;
			snps,nr-gpios = <0x20>;
			reg = <0x00>;
			interrupt-controller;
			interrupts = <0x3e 0x04>;
			interrupt-parent = <0x04>;
			phandle = <0x0e>;
		};
	};

	gpio@03023000 {
		compatible = "snps,dw-apb-gpio";
		reg = <0x00 0x3023000 0x00 0x1000>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;

		gpio-controller@3 {
			compatible = "snps,dw-apb-gpio-port";
			bank-name = "portd";
			gpio-controller;
			#gpio-cells = <0x02>;
			snps,nr-gpios = <0x20>;
			reg = <0x00>;
			interrupt-controller;
			interrupts = <0x3f 0x04>;
			interrupt-parent = <0x04>;
		};
	};

	gpio@05021000 {
		compatible = "snps,dw-apb-gpio";
		reg = <0x00 0x5021000 0x00 0x1000>;
		#address-cells = <0x01>;
		#size-cells = <0x00>;

		gpio-controller@4 {
			compatible = "snps,dw-apb-gpio-port";
			bank-name = "porte";
			gpio-controller;
			#gpio-cells = <0x02>;
			snps,nr-gpios = <0x20>;
			reg = <0x00>;
			interrupt-controller;
			interrupts = <0x46 0x04>;
			interrupt-parent = <0x04>;
			phandle = <0x0f>;
		};
	};

	i2c@04000000 {
		compatible = "snps,designware-i2c";
		clocks = <0x02 0x72>;
		reg = <0x00 0x4000000 0x00 0x1000>;
		clock-frequency = <0x61a80>;
		#size-cells = <0x00>;
		#address-cells = <0x01>;
		resets = <0x03 0x1b>;
		reset-names = "i2c0";
		interrupts = <0x31 0x04>;
		interrupt-parent = <0x04>;
		status = "disabled";
	};

	i2c@04010000 {
		compatible = "snps,designware-i2c";
		clocks = <0x02 0x72>;
		reg = <0x00 0x4010000 0x00 0x1000>;
		clock-frequency = <0x61a80>;
		#size-cells = <0x00>;
		#address-cells = <0x01>;
		resets = <0x03 0x1c>;
		reset-names = "i2c1";
		interrupts = <0x32 0x04>;
		interrupt-parent = <0x04>;
		status = "disabled";
	};

	i2c@04020000 {
		compatible = "snps,designware-i2c";
		clocks = <0x02 0x72>;
		reg = <0x00 0x4020000 0x00 0x1000>;
		clock-frequency = <0x186a0>;
		resets = <0x03 0x1d>;
		reset-names = "i2c2";
		interrupts = <0x33 0x04>;
		interrupt-parent = <0x04>;
	};

	i2c@04030000 {
		compatible = "snps,designware-i2c";
		clocks = <0x02 0x72>;
		reg = <0x00 0x4030000 0x00 0x1000>;
		clock-frequency = <0x61a80>;
		resets = <0x03 0x1e>;
		reset-names = "i2c3";
		interrupts = <0x34 0x04>;
		interrupt-parent = <0x04>;
	};

	i2c@04040000 {
		compatible = "snps,designware-i2c";
		clocks = <0x02 0x72>;
		reg = <0x00 0x4040000 0x00 0x1000>;
		clock-frequency = <0x61a80>;
		resets = <0x03 0x1f>;
		reset-names = "i2c4";
		interrupts = <0x35 0x04>;
		interrupt-parent = <0x04>;
	};

	eth_csrclk {
		clock-output-names = "eth_csrclk";
		clock-frequency = <0xee6b280>;
		#clock-cells = <0x00>;
		compatible = "fixed-clock";
		phandle = <0x06>;
	};

	eth_ptpclk {
		clock-output-names = "eth_ptpclk";
		clock-frequency = <0x2faf080>;
		#clock-cells = <0x00>;
		compatible = "fixed-clock";
		phandle = <0x07>;
	};

	stmmac-axi-config {
		snps,wr_osr_lmt = <0x01>;
		snps,rd_osr_lmt = <0x02>;
		snps,blen = <0x04 0x08 0x10 0x00 0x00 0x00 0x00>;
		phandle = <0x08>;
	};

	rx-queues-config {
		snps,rx-queues-to-use = <0x01>;
		phandle = <0x09>;

		queue0 {
		};
	};

	tx-queues-config {
		snps,tx-queues-to-use = <0x01>;
		phandle = <0x0a>;

		queue0 {
		};
	};

	ethernet@4070000 {
		compatible = "cvitek,ethernet";
		reg = <0x00 0x4070000 0x00 0x10000>;
		clock-names = "stmmaceth\0ptp_ref";
		clocks = <0x06 0x07>;
		tx-fifo-depth = <0x2000>;
		rx-fifo-depth = <0x2000>;
		snps,multicast-filter-bins = <0x00>;
		snps,perfect-filter-entries = <0x01>;
		snps,txpbl = <0x08>;
		snps,rxpbl = <0x08>;
		snps,aal;
		snps,axi-config = <0x08>;
		snps,mtl-rx-config = <0x09>;
		snps,mtl-tx-config = <0x0a>;
		phy-mode = "rmii";
		interrupt-names = "macirq";
		interrupts = <0x1f 0x04>;
		interrupt-parent = <0x04>;
	};

	cv-sd@4310000 {
		compatible = "cvitek,cv181x-sd";
		reg = <0x00 0x4310000 0x00 0x1000>;
		reg-names = "core_mem";
		bus-width = <0x04>;
		cap-sd-highspeed;
		cap-mmc-highspeed;
		sd-uhs-sdr12;
		sd-uhs-sdr25;
		sd-uhs-sdr50;
		sd-uhs-sdr104;
		no-sdio;
		no-mmc;
		src-frequency = <0x165a0bc0>;
		min-frequency = <0x61a80>;
		max-frequency = <0xbebc200>;
		64_addressing;
		reset_tx_rx_phy;
		reset-names = "sdhci";
		pll_index = <0x06>;
		pll_reg = <0x3002070>;
		cvi-cd-gpios = <0x0b 0x0d 0x01>;
		interrupts = <0x24 0x04>;
		interrupt-parent = <0x04>;
	};

	wifi-sd@4320000 {
		compatible = "cvitek,cv181x-sdio";
		bus-width = <0x04>;
		reg = <0x00 0x4320000 0x00 0x1000>;
		reg_names = "core_mem";
		src-frequency = <0x165a0bc0>;
		min-frequency = <0x61a80>;
		max-frequency = <0xb2d05e0>;
		64_addressing;
		reset_tx_rx_phy;
		non-removable;
		pll_index = <0x07>;
		pll_reg = <0x300207c>;
		no-mmc;
		no-sd;
		status = "okay";
		interrupts = <0x26 0x04>;
		interrupt-parent = <0x04>;
		cap-sd-highspeed;
		sd-uhs-sdr25;
		sd-uhs-ddr50;
		sd-uhs-sdr104;
	};

	i2s_mclk {
		clock-output-names = "i2s_mclk";
		clock-frequency = <0x1770000>;
		#clock-cells = <0x00>;
		compatible = "fixed-clock";
		phandle = <0x0c>;
	};

	i2s_subsys {
		compatible = "cvitek,i2s_tdm_subsys";
		reg = <0x00 0x4108000 0x00 0x100>;
		clocks = <0x0c 0x02 0x04 0x02 0x2d 0x02 0x2e 0x02 0x2f 0x02 0x30>;
		clock-names = "i2sclk\0clk_a0pll\0clk_sdma_aud0\0clk_sdma_aud1\0clk_sdma_aud2\0clk_sdma_aud3";
		master_base = <0x4110000>;
	};

	i2s@04100000 {
		compatible = "cvitek,cv1835-i2s";
		reg = <0x00 0x4100000 0x00 0x2000>;
		clocks = <0x0c 0x00>;
		clock-names = "i2sclk";
		dev-id = <0x00>;
		#sound-dai-cells = <0x00>;
		dmas = <0x0d 0x00 0x01 0x01>;
		dma-names = "rx";
		capability = "rx";
		mclk_out = "false";
		interrupts = <0x28 0x04>;
		interrupt-parent = <0x04>;
	};

	i2s@04130000 {
		compatible = "cvitek,cv1835-i2s";
		reg = <0x00 0x4130000 0x00 0x2000>;
		clocks = <0x0c 0x00>;
		clock-names = "i2sclk";
		dev-id = <0x03>;
		#sound-dai-cells = <0x00>;
		dmas = <0x0d 0x07 0x01 0x01>;
		dma-names = "tx";
		capability = "tx";
		mclk_out = "true";
		interrupts = <0x2b 0x04>;
		interrupt-parent = <0x04>;
	};

	adc@0300A100 {
		compatible = "cvitek,cv182xaadc";
		reg = <0x00 0x300a100 0x00 0x100>;
		clocks = <0x0c 0x00>;
		clock-names = "i2sclk";
		clk_source = <0x4130000>;
	};

	dac@0300A000 {
		compatible = "cvitek,cv182xadac";
		reg = <0x00 0x300a000 0x00 0x100>;
		clocks = <0x0c 0x00>;
		clock-names = "i2sclk";
	};

	pdm@0x041D0C00 {
		compatible = "cvitek,cv1835pdm";
		reg = <0x00 0x41d0c00 0x00 0x100>;
		clocks = <0x0c 0x00>;
		clock-names = "i2sclk";
	};

	sound_adc {
		compatible = "cvitek,cv182xa-adc";
		cvi,model = "CV182XA";
		cvi,card_name = "cv182xa_adc";
	};

	sound_dac {
		compatible = "cvitek,cv182xa-dac";
		cvi,model = "CV182XA";
		cvi,card_name = "cv182xa_dac";
	};

	cif {
		compatible = "cvitek,cif";
		reg = <0x00 0xa0c2000 0x00 0x2000 0x00 0xa0d0000 0x00 0x1000 0x00 0xa0c4000 0x00 0x2000 0x00 0xa0c6000 0x00 0x2000 0x00 0x3001c30 0x00 0x30>;
		reg-names = "csi_mac0\0csi_wrap0\0csi_mac1\0csi_mac2\0pad_ctrl";
		snsr-reset = <0x0e 0x11 0x01 0x0e 0x11 0x01 0x0e 0x11 0x01>;
		resets = <0x03 0x46 0x03 0x48 0x03 0x47 0x03 0x49>;
		reset-names = "phy0\0phy1\0phy-apb0\0phy-apb1";
		clocks = <0x02 0x5b 0x02 0x5c 0x02 0x88 0x02 0x03 0x02 0x05 0x02 0x02>;
		clock-names = "clk_cam0\0clk_cam1\0clk_sys_2\0clk_mipimpll\0clk_disppll\0clk_fpll";
		interrupts = <0x1a 0x04 0x1b 0x04>;
		interrupt-names = "csi0\0csi1";
		interrupt-parent = <0x04>;
	};

	mipi_tx {
		compatible = "cvitek,mipi_tx";
		reset-gpio = <0x0f 0x02 0x01>;
		pwm-gpio = <0x0f 0x00 0x00>;
		power-ct-gpio = <0x0f 0x01 0x00>;
		clocks = <0x02 0x69 0x02 0x6a>;
		clock-names = "clk_disp\0clk_dsi";
	};

	sys {
		compatible = "cvitek,sys";
	};

	base {
		compatible = "cvitek,base";
		reg = <0x00 0xa0c8000 0x00 0x20>;
		reg-names = "vip_sys";
	};

	vi {
		compatible = "cvitek,vi";
		reg = <0x00 0xa000000 0x00 0x80000>;
		clocks = <0x02 0x50 0x02 0x51 0x02 0x88 0x02 0x9a 0x02 0x4f 0x02 0x93 0x02 0x9d 0x02 0x5f 0x02 0x5d 0x02 0x5e 0x02 0x9f>;
		clock-names = "clk_sys_0\0clk_sys_1\0clk_sys_2\0clk_sys_3\0clk_axi\0clk_csi_be\0clk_raw\0clk_isp_top\0clk_csi_mac0\0clk_csi_mac1\0clk_csi_mac2";
		clock-freq-vip-sys1 = <0x11e1a300>;
		interrupts = <0x18 0x04>;
		interrupt-parent = <0x04>;
		interrupt-names = "isp";
	};

	vpss {
		compatible = "cvitek,vpss";
		reg = <0x00 0xa080000 0x00 0x10000 0x00 0xa0d1000 0x00 0x100>;
		reg-names = "sc";
		clocks = <0x02 0x50 0x02 0x51 0x02 0x88 0x02 0x60 0x02 0x61 0x02 0x62 0x02 0x63 0x02 0x64 0x02 0x65 0x02 0x66>;
		clock-names = "clk_sys_0\0clk_sys_1\0clk_sys_2\0clk_img_d\0clk_img_v\0clk_sc_top\0clk_sc_d\0clk_sc_v1\0clk_sc_v2\0clk_sc_v3";
		clock-freq-vip-sys1 = <0x11e1a300>;
		interrupts = <0x19 0x04>;
		interrupt-names = "sc";
		interrupt-parent = <0x04>;
	};

	ive {
		compatible = "cvitek,ive";
		reg = <0x00 0xa0a0000 0x00 0x3100>;
		reg-names = "ive_base";
		interrupt-names = "ive_irq";
		interrupt-parent = <0x04>;
		interrupts = <0x61 0x04>;
	};

	vo {
		compatible = "cvitek,vo";
		reg = <0x00 0xa080000 0x00 0x10000 0x00 0xa0c8000 0x00 0xa0 0x00 0xa0d1000 0x00 0x100>;
		reg-names = "sc\0vip_sys\0dphy";
		clocks = <0x02 0x69 0x02 0x6a 0x02 0x68>;
		reset-gpio = <0x0f 0x02 0x01>;
		pwm-gpio = <0x0f 0x00 0x00>;
		power-ct-gpio = <0x0f 0x01 0x00>;
		clock-names = "clk_disp\0clk_dsi\0clk_bt";
	};

	reserved-memory {
		#size-cells = <0x02>;
		#address-cells = <0x02>;
		ranges;

		cvifb {
			alloc-ranges = <0x00 0x9fc3e000 0x00 0x1c2000>;
			size = <0x00 0x1c2000>;
			phandle = <0x10>;
		};

		rproc {
			reg = <0x00 0x9fe00000 0x00 0x200000>;
			no-map;
			phandle = <0x17>;
		};

		vdev0vring0 {
			compatible = "shared-dma-pool";
			alloc-ranges = <0x00 0x8f528000 0x00 0x4000>;
			size = <0x00 0x4000>;
			no-map;
			phandle = <0x18>;
		};

		vdev0vring1 {
			compatible = "shared-dma-pool";
			alloc-ranges = <0x00 0x8f52c000 0x00 0x4000>;
			size = <0x00 0x4000>;
			no-map;
			phandle = <0x19>;
		};

		vdev0buffer {
			compatible = "shared-dma-pool";
			alloc-ranges = <0x00 0x8f530000 0x00 0x100000>;
			size = <0x00 0x100000>;
			no-map;
			phandle = <0x1a>;
		};
	};

	cvifb {
		compatible = "cvitek,fb";
		memory-region = <0x10>;
		reg = <0x00 0xa088000 0x00 0x1000>;
		reg-names = "disp";
	};

	dwa {
		compatible = "cvitek,dwa";
		reg = <0x00 0xa0c0000 0x00 0x1000>;
		reg-names = "dwa";
		clocks = <0x02 0x50 0x02 0x51 0x02 0x88 0x02 0x9a 0x02 0x9b 0x02 0x67>;
		clock-names = "clk_sys_0\0clk_sys_1\0clk_sys_2\0clk_sys_3\0clk_sys_4\0clk_dwa";
		clock-freq-vip-sys1 = <0x11e1a300>;
		interrupts = <0x1c 0x04>;
		interrupt-names = "dwa";
		interrupt-parent = <0x04>;
	};

	rgn {
		compatible = "cvitek,rgn";
	};

	vcodec {
		compatible = "cvitek,asic-vcodec";
		reg = <0x00 0xb020000 0x00 0x10000 0x00 0xb010000 0x00 0x10000 0x00 0xb030000 0x00 0x100 0x00 0xb058000 0x00 0x100 0x00 0xb050000 0x00 0x400>;
		reg-names = "h265\0h264\0vc_ctrl\0vc_sbm\0vc_addr_remap";
		clocks = <0x02 0x53 0x02 0x55 0x02 0x59 0x02 0x56 0x02 0x5a 0x02 0x54 0x02 0x87 0x02 0x8e 0x02 0x8b>;
		clock-names = "clk_axi_video_codec\0clk_h264c\0clk_apb_h264c\0clk_h265c\0clk_apb_h265c\0clk_vc_src0\0clk_vc_src1\0clk_vc_src2\0clk_cfg_reg_vc";
		interrupts = <0x16 0x04 0x15 0x04 0x17 0x04>;
		interrupt-names = "h265\0h264\0sbm";
		interrupt-parent = <0x04>;
	};

	jpu {
		compatible = "cvitek,asic-jpeg";
		reg = <0x00 0xb000000 0x00 0x300 0x00 0xb030000 0x00 0x100 0x00 0xb058000 0x00 0x100>;
		reg-names = "jpeg\0vc_ctrl\0vc_sbm";
		clocks = <0x02 0x53 0x02 0x57 0x02 0x58 0x02 0x54 0x02 0x87 0x02 0x8e 0x02 0x8b>;
		clock-names = "clk_axi_video_codec\0clk_jpeg\0clk_apb_jpeg\0clk_vc_src0\0clk_vc_src1\0clk_vc_src2\0clk_cfg_reg_vc";
		resets = <0x03 0x04>;
		reset-names = "jpeg";
		interrupts = <0x14 0x04>;
		interrupt-names = "jpeg";
		interrupt-parent = <0x04>;
	};

	cvi_vc_drv {
		compatible = "cvitek,cvi_vc_drv";
		reg = <0x00 0xb030000 0x00 0x100 0x00 0xb058000 0x00 0x100 0x00 0xb050000 0x00 0x400>;
		reg-names = "vc_ctrl\0vc_sbm\0vc_addr_remap";
	};

	rtos_cmdqu {
		compatible = "cvitek,rtos_cmdqu";
		reg = <0x00 0x1900000 0x00 0x1000>;
		reg-names = "mailbox";
		interrupts = <0x65 0x04>;
		interrupt-names = "mailbox";
		interrupt-parent = <0x04>;
	};

	usb@04340000 {
		compatible = "cvitek,cv182x-usb";
		reg = <0x00 0x4340000 0x00 0x10000 0x00 0x3006000 0x00 0x58>;
		dr_mode = "otg";
		g-use-dma;
		g-rx-fifo-size = <0x218>;
		g-np-tx-fifo-size = <0x20>;
		g-tx-fifo-size = <0x300 0x200 0x200 0x180 0x80 0x80>;
		clocks = <0x02 0x47 0x02 0x48 0x02 0x49 0x02 0x4a 0x02 0x4b>;
		clock-names = "clk_axi\0clk_apb\0clk_125m\0clk_33k\0clk_12m";
		status = "okay";
		interrupts = <0x1e 0x04>;
		interrupt-parent = <0x04>;
		vbus-gpio = <0x11 0x06 0x00>;
	};

	thermal@030E0000 {
		compatible = "cvitek,cv181x-thermal";
		reg = <0x00 0x30e0000 0x00 0x10000>;
		clocks = <0x02 0x14>;
		clock-names = "clk_tempsen";
		reset-names = "tempsen";
		#thermal-sensor-cells = <0x01>;
		interrupts = <0x10 0x04>;
		interrupt-names = "tempsen";
		interrupt-parent = <0x04>;
		phandle = <0x12>;
	};

	thermal-zones {

		soc_thermal_0 {
			polling-delay-passive = <0x3e8>;
			polling-delay = <0x3e8>;
			thermal-sensors = <0x12 0x00>;

			trips {

				soc_thermal_trip_0 {
					temperature = <0x186a0>;
					hysteresis = <0x1388>;
					type = "passive";
					phandle = <0x13>;
				};

				soc_thermal_trip_1 {
					temperature = <0x1adb0>;
					hysteresis = <0x1388>;
					type = "passive";
					phandle = <0x15>;
				};

				soc_thermal_crtical_0 {
					temperature = <0x1fbd0>;
					hysteresis = <0x00>;
					type = "critical";
				};
			};

			cooling-maps {

				map0 {
					trip = <0x13>;
					cooling-device = <0x14 0xffffffff 0x01>;
				};

				map1 {
					trip = <0x15>;
					cooling-device = <0x14 0xffffffff 0xffffffff>;
				};
			};
		};
	};

	cviaudio_core {
		compatible = "cvitek,audio";
	};

	audio_clock {
		compatible = "fixed-clock";
		#clock-cells = <0x00>;
		clock-frequency = <0x1770000>;
	};

	aliases {
		i2c0 = "/i2c@04000000";
		i2c1 = "/i2c@04010000";
		i2c2 = "/i2c@04020000";
		i2c3 = "/i2c@04030000";
		i2c4 = "/i2c@04040000";
		serial0 = "/serial@04140000";
		serial1 = "/serial@04150000";
		serial2 = "/serial@04160000";
		serial3 = "/serial@04170000";
		serial4 = "/serial@041C0000";
		ethernet0 = "/ethernet@4070000";
	};

	chosen {
		stdout-path = "serial0";
	};

	cpus {
		#address-cells = <0x01>;
		#size-cells = <0x00>;
		timebase-frequency = <0x17d7840>;

		cpu-map {

			cluster0 {

				core0 {
					cpu = <0x01>;
				};
			};
		};

		cpu@0 {
			device_type = "cpu";
			reg = <0x00>;
			status = "okay";
			compatible = "riscv";
			riscv,isa = "rv64imafdvcsu";
			mmu-type = "riscv,sv39";
			clock-frequency = <0x17d7840>;

			interrupt-controller {
				#interrupt-cells = <0x01>;
				interrupt-controller;
				compatible = "riscv,cpu-intc";
				phandle = <0x16>;
			};
		};
	};

	soc {
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		compatible = "simple-bus";
		ranges;

		interrupt-controller@70000000 {
			riscv,ndev = <0x65>;
			riscv,max-priority = <0x07>;
			reg-names = "control";
			reg = <0x00 0x70000000 0x00 0x4000000>;
			interrupts-extended = <0x16 0xffffffff 0x16 0x09>;
			interrupt-controller;
			compatible = "riscv,plic0";
			#interrupt-cells = <0x02>;
			#address-cells = <0x00>;
			phandle = <0x04>;
		};

		clint@74000000 {
			interrupts-extended = <0x16 0x03 0x16 0x07>;
			reg = <0x00 0x74000000 0x00 0x10000>;
			compatible = "riscv,clint0";
			clint,has-no-64bit-mmio;
		};
	};

	cv181x_cooling {
		clocks = <0x02 0x98 0x02 0x0f>;
		clock-names = "clk_cpu\0clk_tpu_axi";
		dev-freqs = <0x32a9f880 0x1dcd6500 0x1954fc40 0x165a0bc0 0x1954fc40 0x11e1a300>;
		compatible = "cvitek,cv181x-cooling";
		#cooling-cells = <0x02>;
		phandle = <0x14>;
	};

	memory@80000000 {
		device_type = "memory";
		reg = <0x00 0x80000000 0x00 0x1fe00000>;
	};

	leds {
		compatible = "gpio-leds";

		led0 {
			gpios = <0x0b 0x1d 0x01>;
			linux,default-trigger = "heartbeat";
			function = "heartbeat";
			label = "blue";
		};

		led1 {
			gpios = <0x0f 0x06 0x00>;
			linux,default-trigger = "netdev";
			function = "heartbeat";
			label = "orange";
		};

		led2 {
			gpios = <0x0f 0x08 0x00>;
			linux,default-trigger = "stmmac-0:00:link";
			function = "heartbeat";
			label = "green";
		};
	};

	mbox@0x01900000 {
		compatible = "cvitek,sg200x-mailbox";
		reg = <0x00 0x1900000 0x00 0x1000>;
		reg-names = "mailbox";
		interrupts = <0x65 0x04>;
		interrupt-parent = <0x04>;
		status = "okay";
		#mbox-cells = <0x04>;
		phandle = <0x1b>;
	};

	cv181x-c906_1 {
		compatible = "cvitek,cv181x-c906_1";
		memory-region = <0x17 0x18 0x19 0x1a>;
		firmware = "c906-mcu.elf";
		resets = <0x03 0x126>;
		reset-names = "sw_reset";
		clocks = <0x02 0x99>;
		clock-names = "clk_c906_1";
		mboxes = <0x1b 0x00 0x02 0x02 0x01 0x1b 0x01 0x01 0x02 0x01>;
		mbox-names = "vq_tx\0vq_rx";
		status = "okay";
	};
};