config

# i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
#
# This config file uses keycodes (bindsym) and was written for the QWERTY
# layout.
#
# To get a config file with the same key positions, but for your current
# layout, use the i3-config-wizard
#
set $mod Mod4

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:monospace 8

# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8

# Before i3 v4.8, we used to recommend this one as the default:
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, its unicode glyph coverage is limited, the old
# X core fonts rendering does not support right-to-left and this being a bitmap
# font, it doesn’t scale on retina/hidpi displays.

# use these keys for focus, movement, and resize directions when reaching for
# the arrows is not convenient
set $up l
set $down k
set $left j
set $right semicolon

# use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod

# start a terminal
bindsym $mod+Return exec gnome-terminal
# bindsym $mod+Return exec i3-sensible-terminal
# bindsym $mod+Return exec urxvt

# kill focused window
bindsym $mod+q kill

# start dmenu (a program launcher)
# bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop

# start rofi
bindsym $mod+d exec rofi -show run
bindsym $mod+Tab exec rofi -show window
bindsym $mod+m exec rofi -show ssh

# change focus
bindsym $mod+$left focus left
bindsym $mod+$down focus down
bindsym $mod+$up focus up
bindsym $mod+$right focus right

# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right

# move focused window
bindsym $mod+Shift+$left move left
bindsym $mod+Shift+$down move down
bindsym $mod+Shift+$up move up
bindsym $mod+Shift+$right move right

# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right

# split in horizontal orientation
bindsym $mod+h split h

# split in vertical orientation
bindsym $mod+v split v

# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split

# toggle tiling / floating
bindsym $mod+Shift+space floating toggle

# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle

# focus the parent container
bindsym $mod+a focus parent

# focus the child container
#bindsym $mod+d focus child

# move the currently focused window to the scratchpad
bindsym $mod+Shift+minus move scratchpad

# show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
bindsym $mod+minus scratchpad show

# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+c workspace 10

# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10

# reload the configuration file
bindsym $mod+Shift+c reload

# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart

# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym $left       resize shrink width 10 px or 10 ppt
        bindsym $down       resize grow height 10 px or 10 ppt
        bindsym $up         resize shrink height 10 px or 10 ppt
        bindsym $right      resize grow width 10 px or 10 ppt

        # same bindings, but for the arrow keys
        bindsym Left        resize shrink width 10 px or 10 ppt
        bindsym Down        resize grow height 10 px or 10 ppt
        bindsym Up          resize shrink height 10 px or 10 ppt
        bindsym Right       resize grow width 10 px or 10 ppt

        # back to normal: Enter or Escape
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

bindsym $mod+r mode "resize"

################################################################################

# Sreen brightness controls
bindsym XF86MonBrightnessUp exec xbacklight -inc 20 # increase screen brightness
bindsym XF86MonBrightnessDown exec xbacklight -dec 20 # decrease screen brightness

# Touchpad controls
bindsym XF86TouchpadToggle exec /etc/i3/toggletouchpad.sh # toggle touchpad
# Enable tapping
exec --no-startup-id xinput set-prop 11 "libinput Tapping Enabled" 1
# exec input set-prop 11 "libinput Tapping Enabled" 1

# Volume control

# # Pulse Audio controls
# bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume 0 +5% #increase sound volume
# bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume 0 -5% #decrease sound volume
# bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute 0 toggle # mute sound

bindsym XF86AudioRaiseVolume exec --no-startup-id amixer set Master 1%+ unmute
bindsym XF86AudioLowerVolume exec --no-startup-id amixer set Master 1%- unmute
bindsym XF86AudioMute exec amixer -q set Master toggle

# bindsym XF86AudioLowerVolume exec /usr/bin/pactl set-sink-volume @DEFAULT_SINK@ '-5%'
# bindsym XF86AudioRaiseVolume exec /usr/bin/pactl set-sink-volume @DEFAULT_SINK@ '+5%'
# bindsym XF86AudioMute exec /usr/bin/pactl set-sink-mute @DEFAULT_SINK@ toggle

# Media player controls
bindsym XF86AudioPlay exec playerctl play
bindsym XF86AudioPause exec playerctl pause
bindsym XF86AudioNext exec playerctl next
bindsym XF86AudioPrev exec playerctl previous

#######################################################################

# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
        # mode hide
        status_command i3status
}
# bindsym $mod+m bar hidden_state show
# bindsym --release $mod+m bar hidden_state hide

# Hide titlebar and borders
new_window none
# new_window normal 0 px
# new_window 1pixel

# Tray applet. Turn on volume manager
exec --no-startup-id pnmixer

# Tray applet. Turn on network manager
exec --no-startup-id nm-applet

# Set wallpaper using feh
# exec feh --bg-scale ~/Pictures/wallpaper.jpg &

# force floating for all new windows
# for_window [class="[.]*"] floating enable

################################################################################
# automatically start i3-config-wizard to offer the user to create a
# keysym-based config which used their favorite modifier (alt or windows)
#
# i3-config-wizard will not launch if there already is a config file
# in ~/.i3/config.
#
# Please remove the following exec line:
################################################################################
# exec i3-config-wizard