nmake.opt

# $Id$
#
# nmake.opt - main configuration file for NMAKE makefiles.
#
# Usage examples (see details below):
# nmake -f makefile.vc
# nmake -f makefile.vc MSVC_VER=1900
# nmake -f makefile.vc MSVC_VER=1900 DEBUG=1
# nmake -f makefile.vc MSVC_VER=1900 DEBUG=1 ANALYZE=1
# nmake -f makefile.vc MSVC_VER=1900 DEBUG=1 ANALYZE=1 WITH_PDB=1
# nmake -f makefile.vc MSVC_VER=1900 WIN64=1
#
# Options:
#    DEBUG - set to disable optimizations and link with debug runtimes; also implies WITH_PDB.
#  ANALYZE - set to enable code analysis output.
# WITH_PDB - set to enable output of PDB files, supported for both debug and release modes.
#    WIN64 - set to target 64-bit architecture.
#
###############################################################################
# For convenience, user may put custom settings in a local settings file
# named nmake.local, or a name defined by the EXT_NMAKE_OPT option.

!IF EXIST("$(GDAL_ROOT)\nmake.local")
!INCLUDE $(GDAL_ROOT)\nmake.local
!ENDIF

# nmake -f makefile.vc EXT_NMAKE_OPT=mynmake.opt
!IFDEF EXT_NMAKE_OPT
!INCLUDE $(EXT_NMAKE_OPT)
!ENDIF

###############################################################################
# Check version of Visual C++ compiler:
# nmake -f makefile.vc MSVC_VER=xxxx
# where xxxx is one of following (older versions no longer supported):
# 1910 = 15.0(2017)
# 1900 = 14.0(2015)
#
!IFNDEF MSVC_VER
#assume msvc VS2015.
MSVC_VER=1900
!ENDIF

###############################################################################
# Optional use of Visual Leak Detector (VLD) by Dan Moulding, available at
# http://vld.codeplex.com/
# Uncomment this line to use VLD in debug configuration only:
#MSVC_VLD_DIR="C:\Program Files\Visual Leak Detector"

###############################################################################
# Location to install .exe, .dll and python stuff
# Edit as required. GDAL_HOME is used for convenience here,
# but this particular relative organization is not mandatory.
# But the paths *should* be absolute (relative paths mess up in submakefiles).

!IFNDEF GDAL_HOME
GDAL_HOME = "C:\warmerda\bld"
!ENDIF
!IFNDEF BINDIR
BINDIR = $(GDAL_HOME)\bin
!ENDIF
!IFNDEF PLUGINDIR
PLUGINDIR = $(BINDIR)\gdalplugins
!ENDIF
!IFNDEF LIBDIR
LIBDIR = $(GDAL_HOME)\lib
!ENDIF
!IFNDEF INCDIR
INCDIR = $(GDAL_HOME)\include
!ENDIF
!IFNDEF DATADIR
DATADIR = $(GDAL_HOME)\data
!ENDIF
!IFNDEF HTMLDIR
HTMLDIR = $(GDAL_HOME)\html
!ENDIF

# Set this to the installed directory containing python.  If you don't
# have python just let it point to a directory that does not exist (as now).
!IFNDEF PYDIR 
PYDIR   =	"C:\Software\Python24"
!ENDIF

# Set the location of your SWIG installation
!IFNDEF SWIG
SWIG = swig.exe
!ENDIF

# SWIG Java settings
!IFNDEF JAVA_HOME
JAVA_HOME = c:\j2sdk1.4.2_12
!ENDIF
!IFNDEF ANT_HOME
ANT_HOME=c:\programmi\apache-ant-1.7.0
!ENDIF
JAVADOC=$(JAVA_HOME)\bin\javadoc
JAVAC=$(JAVA_HOME)\bin\javac
JAVA=$(JAVA_HOME)\bin\java
JAR=$(JAVA_HOME)\bin\jar
JAVA_INCLUDE=-I$(JAVA_HOME)\include -I$(JAVA_HOME)\include\win32

# Compilation flags

# Enable code analysis on request
# http://msdn.microsoft.com/en-us/library/ms173498.aspx
!IFDEF ANALYZE
CXX_ANALYZE_FLAGS=/analyze
!ELSE
CXX_ANALYZE_FLAGS=
!ENDIF

# Force PDB output for DEBUG mode
!IFDEF DEBUG
WITH_PDB=1
!ENDIF

!IFDEF WITH_PDB
CXX_PDB_FLAGS=/Zi /Fd$(GDAL_ROOT)\gdal$(VERSION).pdb
!ELSE
CXX_PDB_FLAGS=
!ENDIF

!IFNDEF OPTFLAGS
!IFNDEF DEBUG
OPTFLAGS= $(CXX_ANALYZE_FLAGS) $(CXX_PDB_FLAGS) /nologo /MP /MD /EHsc /Ox /FC /D_CRT_SECURE_NO_DEPRECATE /D_CRT_NONSTDC_NO_DEPRECATE /DNDEBUG
!ELSE
OPTFLAGS= $(CXX_ANALYZE_FLAGS) $(CXX_PDB_FLAGS) /nologo /MP /MDd /EHsc /FC /D_CRT_SECURE_NO_DEPRECATE /D_CRT_NONSTDC_NO_DEPRECATE /DDEBUG
!ENDIF
!ENDIF  # OPTFLAGS

# 
# Set flags controlling warnings level, and suppression of some warnings.
# 
!IFNDEF WARNFLAGS
# 4127: conditional expression is constant
# 4251: 'identifier' : class 'type' needs to have dll-interface to be used by clients of class 'type2'
# 4275: non – DLL-interface classkey 'identifier' used as base for DLL-interface classkey 'identifier'
# 4786: ??????????
# 4100: 'identifier' : unreferenced formal parameter
# 4245: 'conversion' : conversion from 'type1' to 'type2', signed/unsigned mismatch
# 4206: nonstandard extension used : translation unit is empty (only applies to C source code)
# 4351: new behavior: elements of array 'array' will be default initialized (needed for https://trac.osgeo.org/gdal/changeset/35593)
# 4611: interaction between '_setjmp' and C++ object destruction is non-portable
# 
WARNFLAGS =	/W4 /wd4127 /wd4251 /wd4275 /wd4786 /wd4100 /wd4245 /wd4206 /wd4351 /wd4611

!ENDIF

# 
# Set flags controlling availability of SSE
# 
!IFNDEF SSEFLAGS
SSEFLAGS = /DHAVE_SSE_AT_COMPILE_TIME
SSSE3FLAGS = /DHAVE_SSSE3_AT_COMPILE_TIME
#SSE_ARCH_FLAGS = /arch:SSE
!ENDIF

!IFNDEF AVXFLAGS
AVXFLAGS = /DHAVE_AVX_AT_COMPILE_TIME
AVX_ARCH_FLAGS = /arch:AVX
!ENDIF

# The following are extra disables that can be applied to external source
# not under our control that we wish to use less stringent warnings with.
!IFNDEF SOFTWARNFLAGS
SOFTWARNFLAGS= /wd4244 /wd4702 /wd4701 /wd4013 /wd4706 /wd4057 /wd4210 /wd4305
!ENDIF

# Linker debug options
!IFDEF DEBUG
LDEBUG= /debug
!ELSEIFDEF WITH_PDB
# Ensures that PDB is included in release DLL if so requested
LDEBUG= /debug /opt:ref /opt:icf
!ENDIF

# Uncomment the following if you are building for 64-bit windows
# (x64). You'll need to have PATH, INCLUDE and LIB set up for 64-bit
# compiles.
#WIN64=YES
# Capture WIN64=1 if specified in NMAKE command line
!IFDEF WIN64
WIN64=YES
!ENDIF

# If you don't want some entry points to have STDCALL conventions, 
# comment out the following and add -DCPL_DISABLE_STDCALL in OPTFLAGS.
# This option has no effect on 64-bit windows.
!IFNDEF STDCALL
STDCALL=YES
!ENDIF

# Version number embedded in DLL name. 
# If GDAL version is X.Y.Z, VERSION = X * 100 + Y
!IFNDEF VERSION
VERSION =	202
!ENDIF

# Comment the following out if you want PAM supported disabled
# by default.
!IFNDEF PAM_SETTING
PAM_SETTING=-DPAM_ENABLED
!ENDIF

# Uncomment the following to link OGR utilities against main GDAL DLL
# instead of statically linking against OGR libraries.
!IFNDEF DLLBUILD
DLLBUILD=1
!ENDIF

# Enable all OGR formats, or only raster formats?  Comment out to disable
# vector formats. 
!IFNDEF INCLUDE_OGR_FRMTS
INCLUDE_OGR_FRMTS = YES
!ENDIF

# Enable all GNM formats?  Comment out to disable
# gnm formats.
!IFNDEF INCLUDE_GNM_FRMTS
INCLUDE_GNM_FRMTS = YES
!ENDIF

# To be enabled defined to point to setargv.obj from the Visual C++ directory,
# when you want the utility programs to be able to expand wildcards. 
#SETARGV =	"D:\Software\VStudio\VC98\lib\setargv.obj"

# Uncomment to build with libiconv library to support extended character
# recoding capabilities. GDAL's internal stub implementation supports
# latin1<->utf-8 translations only.
# Depending on your libiconv build you may need to set ICONV_CONST macro to
# const or leave it empty. Take a look on your iconv() declaration in iconv.h.
# If the second parameter declared as const char** then you need to define
# ICONV_CONST=const otherwise leave it empty.
#LIBICONV_DIR = "C:\Program Files\GnuWin32"
#LIBICONV_INCLUDE = -I$(LIBICONV_DIR)\include
#LIBICONV_LIBRARY = $(LIBICONV_DIR)\lib\libiconv.lib
#LIBICONV_CFLAGS = -DICONV_CONST=const

# Comment out the following to disable BSB support.
!IFNDEF BSB_SUPPORTED
BSB_SUPPORTED = 1
!ENDIF

# Comment out the following to disable ODBC support.

!IFNDEF ODBC_SUPPORTED
ODBC_SUPPORTED = 1
!ENDIF

# Uncomment out the following to enable plugin with SQL Native Client support for MSSQL Bulk Copy.
#SQLNCLI_VERSION = 11
#SQLNCLI_DIR = C:\Program Files (x86)\Microsoft SQL Server\$(SQLNCLI_VERSION)0\SDK
#SQLNCLI_LIB = "$(SQLNCLI_DIR)\Lib\x86\sqlncli$(SQLNCLI_VERSION).lib"
#SQLNCLI_INCLUDE = "-I$(SQLNCLI_DIR)\Include" -DSQLNCLI_VERSION=$(SQLNCLI_VERSION) -DMSSQL_BCP_SUPPORTED=1

# Comment out the following to disable JPEG support.

!IFNDEF JPEG_SUPPORTED
JPEG_SUPPORTED = 1
!ENDIF

# This will enable 12bit libjpeg - use only with internal jpeg builds.
!IFNDEF JPEG12_SUPPORTED
JPEG12_SUPPORTED = 1
!ENDIF

#if using an external jpeg library uncomment the following lines
#JPEG_EXTERNAL_LIB = 1
#JPEGDIR = c:/projects/jpeg-6b
#JPEG_LIB = $(JPEGDIR)/libjpeg.lib

#if using an external png library uncomment the following lines
#PNG_EXTERNAL_LIB = 1
#PNGDIR = c:/projects/libpng-1.0.8
#PNG_LIB = $(PNGDIR)/libpng.lib

# if using an external libtiff library
#TIFF_INC =	-Ic:/warmerda/libtiff/libtiff
#TIFF_LIB =	c:/warmerda/libtiff/libtiff/libtiff_i.lib
# uncomment following line, if you have libtiff version >= 4.0 to
# enable BigTIFF support
#TIFF_OPTS=	-DBIGTIFF_SUPPORT

# if using an external libgeotiff library
#GEOTIFF_INC =   -Ic:/warmerda/libgeotiff -Ic:/warmerda/libgeotiff/libxtiff
#GEOTIFF_LIB =   C:/warmerda/libgeotiff/geotiff_i.lib

# Uncomment out the following lines to enable LibKML support.
#LIBKML_DIR = C:/Dev/libkml
#LIBKML_INCLUDE = -I$(LIBKML_DIR)/src -I$(LIBKML_DIR)/third_party/boost_1_34_1
#LIBKML_LIBRARY = $(LIBKML_DIR)/msvc/Release
#LIBKML_LIBS =	$(LIBKML_LIBRARY)/libkmlbase.lib \
#		$(LIBKML_LIBRARY)/libkmlconvenience.lib \
#		$(LIBKML_LIBRARY)/libkmldom.lib \
#		$(LIBKML_LIBRARY)/libkmlengine.lib \
#		$(LIBKML_LIBRARY)/libkmlregionator.lib \
#		$(LIBKML_LIBRARY)/libkmlxsd.lib \
#		$(LIBKML_LIBRARY)/minizip_static.lib \
#		$(LIBKML_DIR)/third_party\expat.win32/libexpat.lib \
#		$(LIBKML_DIR)/third_party\uriparser-0.7.5.win32/release/uriparser.lib \
#		$(LIBKML_DIR)/third_party\zlib-1.2.3.win32/lib/minizip.lib \
#		$(LIBKML_DIR)/third_party\zlib-1.2.3.win32/lib/zlib.lib
							
# Uncomment the following and update to enable ECW read support with the 
# 4.1+ readonly SDK
#ECWDIR  = 	"c:/Program Files/ERDAS/ERDAS ECW JPEG2000 Read SDK"
#ECWFLAGS =	-DECWSDK_VERSION=41 \
#		-I$(ECWDIR)\include \
#		-I$(ECWDIR)\include/NCSECW/api -I$(ECWDIR)\include/NCSECW/jp2 \
#		-I$(ECWDIR)\include/NCSECW/ecw
#ECWLIB  = 	$(ECWDIR)\lib\vc90\win32\NCSEcw4_RO.lib \
#		$(ECWDIR)\lib\vc90\win32\NCSUtil4.lib \
#		$(ECWDIR)\lib\vc90\win32\NCScnet4.lib

# To add Write support, use the write SDK, change NCSEcw4_RO.lib to 
# NCSEcw4.lib, and add -DHAVE_COMPRESS to ECWFLAGS.  The ECWDIR setting will
# also need some adjustment. 

# Uncomment the following and update to enable ECW read support with the 5.0 SDK
#ECWDIR  =  "c:\Intergraph\ecwsdk5"
#ECWFLAGS = -DECWSDK_VERSION=50 \
#       -I$(ECWDIR)\include \
#       -I$(ECWDIR)\include/NCSECW/api -I$(ECWDIR)\include/NCSECW/jp2 \
#       -I$(ECWDIR)\include/NCSECW/ecw
#ECWLIB  =  $(ECWDIR)\lib\vc90\win32\NCSEcw.lib

# To build ECW support as a plugin uncomment the following, and make sure
# to do "nmake /f makefile.vc plugin" in gdal/frmts/ecw and copy the two
# resulting DLLs to an appropriate place.
#ECW_PLUGIN = YES


# Uncomment the following and update to enable JP2Lura driver
#LURATECH_CFLAGS = -Ic:\jp2_csdk_2.16_win64\include
#LURATECH_LIB = c:\jp2_csdk_2.16_win64\library\lwf_jp2.lib

# To build JP2Lura support as a plugin uncomment the following, and make sure
# to do "nmake /f makefile.vc plugin" in gdal/frmts/jp2lura and copy the two
# resulting DLLs to an appropriate place.
#JP2LURA_PLUGIN = YES



# Uncomment the following and update to enable ECW support with the 3.3 SDK.
# Significant adaption may be needed.
#ECWDIR  = 	C:\warmerda\libecwj2-3.3
#ECWLIB  = 	$(ECWDIR)\Source\NCSBuildQmake\Debug\libecwj2.lib
#ECWFLAGS = 	-DECWSDK_VERSION=33 \
#		-I$(ECWDIR)\include -I$(ECWDIR)/Source/include \
#		/D_MBCS /D_UNICODE /DUNICODE /D_WINDOWS \
#		/DLIBECWJ2 /DWIN32 /D_WINDLL -DNO_X86_MMI

# DWG support using the Open Design Alliance Teigha Libraries

#TD_BASE = C:\warmerda\pkg\td_vc9
#TD_FLAGS = -D_TOOLKIT_IN_DLL_
#TD_INCLUDE = -I$(TD_BASE)\TD\Include -I$(TD_BASE)\TD\Extensions\ExServices
# The following works for Teigha 4.2.2
# In TD_INCLUDE, add /D_TOOLKIT_IN_DLL_ if linking against the .dll
#TD_INCLUDE = -I$(TD_BASE)\Core\Include -I$(TD_BASE)\Core\Extensions\ExServices -I$(TD_BASE)\Dgn\include -I$(TD_BASE)\Dgn\Extensions\ExServices
#TD_LIBDIR = $(TD_BASE)\lib\vc14dll
#TD_LIBS =  \
#	$(TD_LIBDIR)/TD_Key.lib \
#	$(TD_LIBDIR)/TD_ExamplesCommon.lib \
#	$(TD_LIBDIR)/TD_Db.lib \
#	$(TD_LIBDIR)/TD_DbRoot.lib \
#	$(TD_LIBDIR)/TD_Root.lib \
#	$(TD_LIBDIR)/TD_Ge.lib \
#	$(TD_LIBDIR)/TD_Alloc.lib \
#	$(TD_LIBDIR)/TG_Db.lib \
#	$(TD_LIBDIR)/TG_ExamplesCommon.lib \
#	advapi32.lib

# Uncomment to build as a plugin
#TD_PLUGIN = YES


# Uncomment the following and update to enable OGDI support.
#OGDIDIR =	D:\warmerda\iii\devdir
#OGDI_INCLUDE = $(OGDIDIR)\include\ogdi
#OGDIVER =	31
#OGDILIB =	$(OGDIDIR)\lib\$(TARGET)\ogdi$(OGDIVER).lib \
#		$(OGDIDIR)\lib\$(TARGET)\zlib_ogdi$(OGDIVER).lib

# Uncomment for Expat support (required for KML, GPX and GeoRSS read support).
#EXPAT_DIR = "C:\Program Files\Expat 2.0.1"
#EXPAT_INCLUDE = -I$(EXPAT_DIR)/source/lib
#EXPAT_LIB = $(EXPAT_DIR)/bin/libexpat.lib

# Uncomment for Xerces based GML and ILI support.
#XERCES_DIR =	c:\warmerda\supportlibs\xerces-c_3_1_3
#XERCES_INCLUDE = -I$(XERCES_DIR)/include -I$(XERCES_DIR)/include/xercesc
#XERCES_LIB = $(XERCES_DIR)/lib/xerces-c_3.lib

# Uncomment the following for Interlis support.  Note that a Xercex 3.x
# is also required (see above).  Also, Interlis support only works with
# Visual Studio.NET or newer, not VC6.
#ILI_ENABLED = YES

# Uncomment for JasPer based JPEG2000 support
#JASPER_DIR = d:\projects\jasper-1.700.2.uuid
#JASPER_INCLUDE = -I$(JASPER_DIR)\src\libjasper\include -DJAS_WIN_MSVC_BUILD
#JASPER_LIB = $(JASPER_DIR)\src\msvc\Win32_Release\libjasper.lib
# Uncomment the following line if you have patched UUID-enabled version
# of JasPer from ftp://ftp.remotesensing.org/gdal/
#JASPER_INCLUDE = $(JASPER_INCLUDE) -DHAVE_JASPER_UUID

# Uncomment and adjust paths if you have Kakadu 6.0 or newer
#
# Starting with KKDU V7.9.1 (at least), it is possible to generate 
# jp2ak and jpipkak with the 2 Kakadu DLLs instead of object files
# In such case :
#   o do NOT define KAKOBJDIR
#   o define KAKLIB with BOTH Kakadu DLLs
#KAKFLAGS=-DKDU_MAJOR_VERSION=7 -DKDU_MINOR_VERSION=9 -DKDU_PATCH_VERSION=1
#KAKDIR = C:\0_PGH\SRC_CSD\CSD_INTEGRATION\cots\kakadu\download\dev
#KAKLIB = $(KAKDIR)\lib_x64\kdu_v79R.lib 	$(KAKDIR)\lib_x64\kdu_a79R.lib
#KAKSRC = $(KAKDIR)\v7_9_1-01156C
#KAKOBJDIR =  $(KAKDIR)\v7_generated_x86
KAKADU_7_5_OR_LATER = YES
#JP2KAK_PLUGIN = YES

# Uncomment the following and update to enable NCSA HDF Release 4 support.
#HDF4_PLUGIN = NO
#HDF4_DIR =	D:\warmerda\HDF41r5
#HDF4_LIB =	/LIBPATH:$(HDF4_DIR)\lib Ws2_32.lib
#HDF4_INCLUDE = $(HDF4_DIR)\include
# HDF4 library newer than 4.2.5 has a SDreset_maxopenfiles/SDget_maxopenfiles
# interface which allows opening many HDF files simultaneously (the max
# number of files was previously hardcoded and too low, smth. like 32).
# Uncomment following if your library is newer than 4.2.5.
#HDF4_HAS_MAXOPENFILES = YES

# Uncomment the following and update to enable NCSA HDF Release 5 support.
#HDF5_PLUGIN = NO
#HDF5_DIR =	c:\warmerda\supportlibs\hdf5\5-164-win
#HDF5_LIB =	$(HDF5_DIR)\dll\hdf5dll.lib 

# Uncomment the following and update to enable KEA support.
#KEA_PLUGIN = NO
#KEA_CFLAGS = -Ic:\kea\include
#KEA_LIB = c:\kea\libkea.lib 

# Uncomment the following for MrSID support.  Only MRSID_DIR is required,
# which may point to a MrSID Raster SDK, Lidar SDK, or the combined SDK, and
# will auto-configure the mrsid and/or mrsid_lidar drivers as appropriate.
# Other configuration options can be specified to control specific features
# that may be available.  See comments at the top of frmts/mrsid/nmake.opt
# for more details.
#MRSID_DIR =	d:\projects\mrsid
#MRSID_JP2 =    YES

!IF DEFINED(MRSID_DIR) || DEFINED(MRSID_RASTER_DIR) || DEFINED(MRSID_LIDAR_DIR)
!IF EXIST(frmts\mrsid\nmake.opt)
!INCLUDE frmts\mrsid\nmake.opt
!ENDIF
!ENDIF

# PCIDSK Libraries - default configuration uses internal implementation
PCIDSK_SETTING=INTERNAL
# Replace with these to use an external build.
#PCIDSK_SETTING=EXTERNAL
#PCIDSK_INCLUDE=-I\warmerda\pcidsk\src
#PCIDSK_LIB=\warmerda\pcidsk\src\pcidsk.lib

# PostGIS Libraries
#PG_INC_DIR = n:\pkg\libpq_win32\include
#PG_LIB = n:\pkg\libpq_win32\lib\libpqdll.lib wsock32.lib

# MySQL Libraries
# NOTE: Need /MT instead of /MD, also enable /EHsc switch. 
#MYSQL_INC_DIR = D:\Software\MySQLServer4.1\include
#MYSQL_LIB = D:\Software\MySQLServer4.1\lib\opt\libmysql.lib advapi32.lib

# INGRES Libraries
# Uncomment the following to enable Ingres format.
# INGRES_HOME = $(II_SYSTEM)\ingres
# Uncomment the following if you prefer to build Ingres support as a plugin.
# INGRES_PLUGIN = YES
!IFDEF INGRES_HOME
INGRES_INC_DIR = "$(INGRES_HOME)\files"
INGRES_LIB = "$(INGRES_HOME)\lib\iilibapi.lib" \
	"$(INGRES_HOME)\lib\iilibutil.lib" \
	"$(INGRES_HOME)\lib\libingres.lib"
!ENDIF


# SQLite Libraries
#SQLITE_INC=-IN:\pkg\sqlite-win32
#SQLITE_LIB=N:\pkg\sqlite-win32\sqlite3_i.lib
# For spatialite support, try this instead (assuming you grab the libspatialite-amalgamation-2.3.1 and installed it in osgeo4w):
# The -DSPATIALITE_AMALGAMATION, which cause "spatialite/sqlite3.h" to be included instead of "sqlite3.h" might not be necessary
# depending on the layout of the include directories. In case of compilation errors, remove it.
# For RasterLite2 support, add something like -Ic:\install-rl2\include -DHAVE_RASTERLITE2
#SQLITE_INC=-IC:\osgeo4w\include -DHAVE_SPATIALITE -DSPATIALITE_AMALGAMATION
# For RasterLite2 support, add something like c:\install-rl2\lib\librasterlite2.lib
#SQLITE_LIB=C:\osgeo4w\lib\spatialite_i.lib
# Uncomment following line if libsqlite3 has been compiled with SQLITE_HAS_COLUMN_METADATA=yes
#SQLITE_HAS_COLUMN_METADATA=yes
# Uncomment following line if spatialite is 4.1.2 or later
#SPATIALITE_412_OR_LATER=yes

# PCRE Library (REGEXP support for SQLite) for example from http://sourceforge.net/projects/gnuwin32/files/pcre/7.0/pcre-7.0.exe/download
#PCRE_INC=-I"C:\Program Files\GNUWin32\include" -DHAVE_PCRE
#PCRE_LIB="C:\Program Files\GNUWin32\lib\pcre.lib"

# Informix Data Blade
#INFORMIXDIR="C:\Program Files\IBM\Informix\Client-SDK"
#IDB_INC=-I$(INFORMIXDIR)\incl\cpp -I$(INFORMIXDIR)\incl\dmi \
#	-I$(INFORMIXDIR)\incl\esql
#IDB_LIB=$(INFORMIXDIR)\lib\cpp\libthc++.lib \
#	$(INFORMIXDIR)\lib\dmi\libthdmi.lib $(INFORMIXDIR)\lib\isqlt09a.lib

# Uncomment the following and update to enable FME support.
#FME_DIR =	d:\Software\fme

# Uncomment the following to enable FITS format support
#FITS_PLUGIN = NO
#FITS_INC_DIR =	c:\dev32\usr\include\cfitsio
#FITS_LIB =	c:\dev32\usr\lib\cfitsio.lib

# Comment out to disable GRIB support.
GRIB_SETTING=yes

# Uncomment the following to enable NetCDF format.
#NETCDF_PLUGIN = NO
#NETCDF_SETTING=yes
#NETCDF_LIB=C:\Software\netcdf\lib\netcdf.lib
#NETCDF_INC_DIR=C:\Software\netcdf\include

# Uncomment the following to add NC4 and HDF4 support
#NETCDF_HAS_NC4 = yes
#NETCDF_HAS_HDF4 = yes

# PROJ stuff
# Uncomment the following lines to link PROJ library statically. Otherwise
# it will be linked dynamically during runtime.
# To use the new API of proj5 or later, use
#PROJ_FLAGS = -DPROJ_STATIC -DPROJ_VERSION=5
# for proj 4.x:
#PROJ_FLAGS = -DPROJ_STATIC -DPROJ_VERSION=4

#PROJ_INCLUDE = -Id:\projects\proj.4\src
#PROJ_LIBRARY = d:\projects\proj.4\src\proj_i.lib

# Add ORACLE support.
# Uncomment the following line to enable OCI Oracle Spatial support.
#ORACLE_HOME =	C:/Software/Oracle/Product/10.1.0/db_1
# Uncomment the following if you prefer to build OCI support as a plugin.
#OCI_PLUGIN = YES

!IFDEF ORACLE_HOME
OCI_LIB =	$(ORACLE_HOME)\oci\lib\msvc\ociw32.lib \
		$(ORACLE_HOME)\oci\lib\msvc\oci.lib
OCI_INCLUDE =	-I$(ORACLE_HOME)\oci\include
!ENDIF

#SDE_ENABLED = YES
#SDE_VERSION=91
#SDE_PLUGIN = NO
#SDE_SDK = C:\arcgis\arcsde
#SDE_INC = $(SDE_SDK)\include 
#SDE_LIB = $(SDE_SDK)\lib\pe$(SDE_VERSION).lib \
#          $(SDE_SDK)\lib\sde$(SDE_VERSION).lib $(SDE_SDK)\lib\sg$(SDE_VERSION).lib      


#FGDB_ENABLED = YES
#FGDB_PLUGIN = YES
#FGDB_SDK = C:\Users\rburhum\Desktop\FileGDB_API_VS2008_1_0beta3
#FGDB_INC = $(FGDB_SDK)\include 
#FGDB_LIB = $(FGDB_SDK)\lib\FileGDBAPI.lib

#uncomment to build AmigoCloud as a plugin instead
#AMIGOCLOUD_PLUGIN = YES


#uncomment to use ArcObjects
#ARCOBJECTS_ENABLED = YES
#ARCOBJECTS_PLUGIN = YES
#ARCOBJECTS_SDK = C:\PROGRA~2\ArcGIS\com
#ARCOBJECTS_INC = $(ARCOBJECTS_SDK)\..\include
#
#Interestingly, since this is a COM application, we don't link against external libraries,
#but we still need to link the app, so we put the generic user32.lib to force the linking process
#ARCOBJECTS_LIB = user32.lib


# Uncomment to use libcurl (DLL by default)
# The cURL library is used for WCS, WMS, GeoJSON, SRS call importFromUrl(), WFS, GFT, CouchDB, /vsicurl/ etc.
#CURL_DIR=C:\curl-7.15.0
#CURL_INC = -I$(CURL_DIR)/include
# Uncomment following line to use libcurl as dynamic library
#CURL_LIB = $(CURL_DIR)/libcurl_imp.lib wsock32.lib wldap32.lib winmm.lib
# Uncomment following two lines to use libcurl as static library
#CURL_LIB = $(CURL_DIR)/libcurl.lib wsock32.lib wldap32.lib winmm.lib
#CURL_CFLAGS = -DCURL_STATICLIB

# Uncomment for DODS / OPeNDAP support
#DODS_DIR = C:\libdap3.6.2
#DODS_LIB = $(DODSDIR)\lib\libdapMD.lib
# Uncomment for libdap >= 3.9
#DODS_FLAGS = -DLIBDAP_39

# Uncomment for GEOS support (GEOS >= 3.1.0 required)
#GEOS_DIR=C:/warmerda/geos
#GEOS_CFLAGS = -I$(GEOS_DIR)/capi -I$(GEOS_DIR)/source/headers -DHAVE_GEOS
#GEOS_LIB     = $(GEOS_DIR)/source/geos_c_i.lib

# Uncomment for SOSI support
#SOSI_PLUGIN = YES
#SOSI_ENABLED = YES
#SOSI_INC_DIR = e:/sosi
#SOSI_LIBS = e:/sosi/FYBA.lib e:/sosi/GM.lib e:/sosi/UT.lib

# Uncomment for OpenJpeg (release v2.1 or later) support
#OPENJPEG_ENABLED = YES
# Note that, contrary to GDAL releases <= 2.2.X, this must point to the
# directory where openjpeg.h and opj_config.h are set 
#OPENJPEG_CFLAGS = -IC:\openjpeg\include\openjpeg-2.X
#OPENJPEG_LIB = C:\openjpeg\lib\openjp2.lib

#if using an external zlib uncomment the following lines
#ZLIB_EXTERNAL_LIB = 1
#ZLIB_INC = -IC:\projects\zlib
#ZLIB_LIB = C:\projects\lib\Release\zlib.lib

# Uncomment for PDF support
# Uncomment POPPLER_BASE_STREAM_HAS_TWO_ARGS = YES for Poppler >= 0.16.0
# Uncomment POPPLER_0_20_OR_LATER = YES for Poppler >= 0.20.0
# Uncomment POPPLER_0_23_OR_LATER = YES for Poppler >= 0.23.0
# Uncomment POPPLER_0_58_OR_LATER = YES for Poppler >= 0.58.0
#POPPLER_ENABLED = YES
#POPPLER_CFLAGS = -Ie:/kde/include -Ie:/kde/include/poppler
#POPPLER_HAS_OPTCONTENT = YES
#POPPLER_BASE_STREAM_HAS_TWO_ARGS = YES
#POPPLER_0_20_OR_LATER = YES
#POPPLER_0_23_OR_LATER = YES
#POPPLER_0_58_OR_LATER = YES
#POPPLER_LIBS = e:/kde/lib/poppler.lib e:/kde/lib/freetype.lib e:/kde/lib/liblcms-1.lib advapi32.lib gdi32.lib

# Uncomment for PDF support
#PODOFO_ENABLED = YES
#PODOFO_CFLAGS = -Ie:/podofo-svn/install/include -Ie:/podofo-svn/install/include/podofo
#PODOFO_LIBS = e:/podofo-svn/install/lib/podofo.lib E:/release-1500-dev/release-1500/lib/freetype239.lib gdi32.lib

# Uncomment for PDF support with PDFium
#
# Copyright (C) 2015 Klokan Technologies GmbH (http://www.klokantech.com/)
# Author: Martin Mikita <martin.mikita@klokantech.com>, xmikit00 @ FIT VUT Brno
#
# Pdfium can be built from the win_gdal_build branch at https://github.com/rouault/pdfium that
# has the following patch to ensure /MD (MultiThreadedDLL) linking consistent with GDAL one.
# Build script from PDFium is available at https://github.com/rouault/pdfium/tree/build
#
#diff --git a/build/standalone.gypi b/build/standalone.gypi
#index ecf849b..0e567e4 100644
#--- a/build/standalone.gypi
#+++ b/build/standalone.gypi
#@@ -100,7 +100,8 @@
#               ['component=="shared_library"', {
#                 'RuntimeLibrary': '2',  #/MD
#               }, {
#-                'RuntimeLibrary': '0',  #/MT
#+                #'RuntimeLibrary': '0',  #/MT
#+                 'RuntimeLibrary': '2',  #/MD
#               }],
#             ],
#
#PDFIUM_ENABLED = YES
#PDFIUM_CFLAGS = -Ie:/pdfium/ -Ie:/pdfium/public
#PDFIUM_LIB_DIR = e:/pdfium/build/Release/lib
#PDFIUM_LIBS = $(PDFIUM_LIB_DIR)/pdfium.lib $(PDFIUM_LIB_DIR)/bigint.lib $(PDFIUM_LIB_DIR)/fdrm.lib $(PDFIUM_LIB_DIR)/formfiller.lib $(PDFIUM_LIB_DIR)/fpdfapi.lib $(PDFIUM_LIB_DIR)/fpdfdoc.lib $(PDFIUM_LIB_DIR)/fpdftext.lib $(PDFIUM_LIB_DIR)/freetype.lib $(PDFIUM_LIB_DIR)/fxcodec.lib $(PDFIUM_LIB_DIR)/fxcrt.lib $(PDFIUM_LIB_DIR)/fxedit.lib $(PDFIUM_LIB_DIR)/fxge.lib $(PDFIUM_LIB_DIR)/pdfwindow.lib $(PDFIUM_LIB_DIR)/fx_agg.lib $(PDFIUM_LIB_DIR)/fx_lcms2.lib $(PDFIUM_LIB_DIR)/fx_libjpeg.lib $(PDFIUM_LIB_DIR)/fx_libopenjpeg.lib $(PDFIUM_LIB_DIR)/fx_zlib.lib gdi32.lib kernel32.lib advapi32.lib

# Build PDF driver as plugin
#PDF_PLUGIN = NO

# Uncomment for LZMA TIFF support
#LZMA_CFLAGS = -IC:/gdal_trunk/xz-5.0.0-windows/include
#LZMA_LIBS = C:/gdal_trunk/xz-5.0.0-windows/bin_i486/liblzma.lib

# Uncomment for ZSTD TIFF support
#ZSTD_CFLAGS = -IC:/install-zstd/include
#ZSTD_LIBS = C:/install-zstd/lib/libzstd.lib

# Uncomment for WEBP support
#WEBP_ENABLED = YES
#WEBP_CFLAGS = -IE:/libwebp-0.1-windows/dev/Include
#WEBP_LIBS = e:/libwebp-0.1-windows/dev/lib/libwebp_a.lib

# Uncomment for libxml2 support (for cpl_xml_validate.cpp routines, used optionally by the GML driver)
#LIBXML2_INC = -Iz:\home\even\release-1500-dev\release-1500\include
#LIBXML2_LIB = z:\home\even\release-1500-dev\release-1500\lib\libxml2.lib

# Uncomment for freexl support
#
# Note: Currently there is no MSVC makefile to build freexl.
# Here's the procedure I've followed (from root of freexl source tree)
# cl /c src/freexl.c /Iheaders /IE:\release-1500-dev\release-1500\include /DDLL_EXPORT
# link /dll E:\release-1500-dev\release-1500\lib\iconv.lib freexl.obj /out:freexl.dll /implib:freexl_i.lib
#
#FREEXL_CFLAGS = -Ie:/freexl-1.0.0a/headers
#FREEXL_LIBS = e:/freexl-1.0.0a/freexl_i.lib

# Uncomment for libgta support
#
#GTA_CFLAGS = -IC:/gdal_trunk/libgta-1.0.0-w32/include -IC:/gdal_trunk/libgta-1.0.0-w32/include/gta
#GTA_LIBS = C:/gdal_trunk/libgta-1.0.0-w32/lib/libgta.dll.a

# Uncomment for MongoDB support
# This configuration is valid for a libmongoclient built as a DLL with: scons.bat --32 --dynamic-windows --sharedclient  --prefix=c:\users\even\dev\mongo-client-install --cpppath=c:\users\even\dev\boost_1_55_0_32bit --libpath=c:\users\even\dev\boost_1_55_0_32bit\lib32-msvc-10.0 install
#MONGODB_PLUGIN = NO
#MONGODB_INC = c:/users/even/dev/mongo-client-install/include
# Boost library names must be edited to reflect the actual MSVC and Boost versions
#BOOST_INC = c:/users/even/dev/boost_1_55_0_32bit
#BOOST_LIB_PATH= c:\users\even\dev\boost_1_55_0_32bit\lib32-msvc-10.0
#MONGODB_LIBS = c:/users/even/dev/mongo-client-install/lib/mongoclient.lib  $(BOOST_LIB_PATH)\libboost_thread-vc100-mt-1_55.lib   $(BOOST_LIB_PATH)\libboost_system-vc100-mt-1_55.lib  $(BOOST_LIB_PATH)\libboost_date_time-vc100-mt-1_55.lib   $(BOOST_LIB_PATH)\libboost_chrono-vc100-mt-1_55.lib

# For a static build of mongoclient, only building the driver as a plugin succeeded
# The libmongoclient_s.lib file had to be renamed without the _s prefix to enable successful linking
# It was built with: c:\Python27\Scripts\scons.bat --32 --prefix=c:\users\even\dev\mongo-client-install --cpppath=c:\users\even\dev\boost_1_55_0_32bit --libpath=c:\users\even\dev\boost_1_55_0_32bit\lib32-msvc-10.0 install
# MONGODB_PLUGIN = YES
# MONGODB_INC = c:/users/even/dev/mongo-client-install/include
# MONGODB_CFLAGS = -DSTATIC_LIBMONGOCLIENT
# BOOST_INC = c:/users/even/dev/boost_1_55_0_32bit
# BOOST_LIB_PATH= c:\users\even\dev\boost_1_55_0_32bit\lib32-msvc-10.0
# MONGODB_LIBS = c:/users/even/dev/mongo-client-install/lib/libmongoclient.lib $(BOOST_LIB_PATH)\libboost_thread-vc100-mt-1_55.lib  $(BOOST_LIB_PATH)\libboost_thread-vc100-mt-s-1_55.lib $(BOOST_LIB_PATH)\libboost_system-vc100-mt-1_55.lib $(BOOST_LIB_PATH)\libboost_system-vc100-mt-s-1_55.lib $(BOOST_LIB_PATH)\libboost_date_time-vc100-mt-1_55.lib  $(BOOST_LIB_PATH)\libboost_date_time-vc100-mt-s-1_55.lib $(BOOST_LIB_PATH)\libboost_chrono-vc100-mt-1_55.lib $(BOOST_LIB_PATH)\libboost_chrono-vc100-mt-s-1_55.lib $(BOOST_LIB_PATH)\libboost_regex-vc100-mt-s-1_55.lib /nodefaultlib:msvcprt /nodefaultlib:libcmt

# QHull configuration. By default use internal libqhull.
# QHULL_SETTING can be set to INTERNAL, EXTERNAL or NO
# For external qhull, use qhull 2012
!IFNDEF QHULL_SETTING
QHULL_SETTING = INTERNAL
!ENDIF
# To be defined if QHULL_SETTING=EXTERNAL
# QHULL_INC = -I....

# Cryptopp stuff.
# Make sure cryptopp is compiled with /MD ( Properties | Configuration properties | C/C++ |  Code Generation | Runtime Library: Multi-threaded DLL (/MD))
# The headers file must be in $(CRYPTOPP_INC)/cryptopp (the /cryptopp part must not be in the following variable then)
# CRYPTOPP_INC = -Ic:/install-cryptopp-x64/include 
#
# Define USE_ONLY_CRYPTODLL_ALG is running against cryptopp.dll, but not if statically linking
# USE_ONLY_CRYPTODLL_ALG=YES
#
# When linking against the DLL:
# CRYPTOPP_LIB = c:/install-cryptopp-x64/lib/cryptopp.lib
#
# When linking against the static lib:
# CRYPTOPP_LIB = c:/install-cryptopp-x64/lib/cryptlib.lib

# OpenSSL stuff (needed if using curl in multithreaded way, with OpenSSL backend)
# OPENSSL_INC = -Ic:/install-openssl/include
# OPENSSL_LIB = c:/instal-oppenssl/lib/ssleay32.lib

# Comment out to disable MRF support.
MRF_SETTING=yes

# Any extra libraries needed on this platform?
ADD_LIBS	= 

# Binding list. One or several in the following list
# csharp, java, python
#BINDINGS=java python

# Comment out the following if you want to build with Python support, but
# you don't have Numeric Python installed (with include files).  Numeric
# integration may not work.  This only appears to the old generation 
# bindings. 
#HAVE_NUMPY=1

########### END OF STUFF THAT NORMALLY NEEDS TO BE UPDATED ##################


# Location of MS Data Access SDK (not really needed anymore I think)
#MSDASDK =	D:\Software\MDAC_2.6

GDAL_DLL =	gdal$(VERSION).dll

INC	=	-I$(GDAL_ROOT)\port -I$(GDAL_ROOT)\ogr -I$(GDAL_ROOT)\gcore \
		-I$(GDAL_ROOT)\alg -I$(GDAL_ROOT)\ogr\ogrsf_frmts  -I$(GDAL_ROOT)\gnm -I$(GDAL_ROOT)\gnm\gnm_frmts -I$(GDAL_ROOT)\apps

!IFDEF MSVC_VLD_DIR
MSVC_VLD_FLAGS=-DMSVC_USE_VLD=1 -I$(MSVC_VLD_DIR)\include
!IFDEF WIN64
MSVC_VLD_LIB=/LIBPATH:$(MSVC_VLD_DIR)/lib/Win64
!ELSE
MSVC_VLD_LIB=/LIBPATH:$(MSVC_VLD_DIR)/lib/Win32
!ENDIF
!ENDIF

!IFDEF INCLUDE_GNM_FRMTS
!IFNDEF GNM_FLAG
GNM_FLAG = -DGNM_ENABLED
!ENDIF
!ENDIF

#LINKER_FLAGS =	/NODEFAULTLIB:LIBC 
LINKER_FLAGS = $(EXTRA_LINKER_FLAGS) $(MSVC_VLD_LIB) $(LDEBUG)


CFLAGS	=	$(OPTFLAGS) $(WARNFLAGS) $(USER_DEFS) $(SSEFLAGS) $(SSSE3FLAGS) $(INC) $(AVXFLAGS) $(EXTRAFLAGS) $(OGR_FLAG) $(GNM_FLAG) $(MSVC_VLD_FLAGS) -DGDAL_COMPILATION
CPPFLAGS = $(CFLAGS) -DNOMINMAX
MAKE	=	nmake /nologo

!IFNDEF CC
CC	=	cl
!ENDIF

INSTALL	=	xcopy /y /r /d /f /I

CPLLIB	=    $(GDAL_ROOT)/port/cpl.lib

!IFDEF DLLBUILD
GDALLIB	=    $(GDAL_ROOT)/gdal_i.lib
!ELSE
GDALLIB	=    $(GDAL_ROOT)/gdal.lib
!ENDIF

!IFDEF ODBC_SUPPORTED
# legacy_stdio_definitions.lib : https://connect.microsoft.com/VisualStudio/feedback/details/1134693/vs-2015-ctp-5-c-vsnwprintf-s-and-other-functions-are-not-exported-in-appcrt140-dll-breaking-linkage-of-static-libraries
ODBCLIB = legacy_stdio_definitions.lib odbc32.lib odbccp32.lib user32.lib
!ENDIF

!IF DEFINED(MRSID_DIR) || DEFINED(MRSID_RASTER_DIR) || DEFINED(MRSID_LIDAR_DIR)
!IF "$(MRSID_PLUGIN)" != "YES"
MRSID_LIB_LINK = $(MRSID_LIB)
!ELSE
MRSID_LIB_LINK=
!ENDIF
!ENDIF

!IFDEF ECWDIR
!IF "$(ECW_PLUGIN)" != "YES"
ECW_LIB_LINK= $(ECWLIB)
!ELSE
ECW_LIB_LINK=
!ENDIF
!ENDIF

!IFDEF LURATECH_CFLAGS
!IF "$(JP2LURA_PLUGIN)" != "YES"
LURATECH_LIB_LINK= $(LURATECH_LIB)
!ELSE
LURATECH_LIB_LINK=
!ENDIF
!ENDIF

!IFDEF KAKDIR
!IF "$(JP2KAK_PLUGIN)" != "YES"
KAK_LIB_LINK= $(KAKLIB)
!ELSE
KAK_LIB_LINK=
!ENDIF
!ENDIF

!IFDEF FITS_LIB
!IF "$(FITS_PLUGIN)" != "YES"
FITS_LIB_LINK = $(FITS_LIB)
!ELSE
FITS_LIB_LINK =
!ENDIF
!ENDIF

!IFDEF POPPLER_LIBS
!IF "$(PDF_PLUGIN)" != "YES"
PDF_LIB_LINK = $(POPPLER_LIBS)
!ELSE
PDF_LIB_LINK =
!ENDIF
!ENDIF

!IFDEF PODOFO_LIBS
!IF "$(PDF_PLUGIN)" != "YES"
PDF_LIB_LINK = $(PODOFO_LIBS)
!ELSE
PDF_LIB_LINK =
!ENDIF
!ENDIF

!IFDEF PDFIUM_LIBS
!IF "$(PDF_PLUGIN)" != "YES"
PDF_LIB_LINK = $(PDFIUM_LIBS)
!ELSE
PDF_LIB_LINK =
!ENDIF
!ENDIF

!IFDEF NETCDF_LIB
!IF "$(NETCDF_PLUGIN)" != "YES"
NETCDF_LIB_LINK = $(NETCDF_LIB)
!ELSE
NETCDF_LIB_LINK =
!ENDIF
!ENDIF

!IFDEF HDF4_LIB
!IF "$(HDF4_PLUGIN)" != "YES"
HDF4_LIB_LINK = $(HDF4_LIB)
!ELSE
HDF4_LIB_LINK =
!ENDIF
!ENDIF

!IFDEF HDF5_LIB
!IF "$(HDF5_PLUGIN)" != "YES"
HDF5_LIB_LINK = $(HDF5_LIB)
!ELSE
HDF5_LIB_LINK =
!ENDIF
!ENDIF

!IFDEF KEA_LIB
!IF "$(KEA_PLUGIN)" != "YES"
KEA_LIB_LINK = $(KEA_LIB)
!ELSE
KEA_LIB_LINK =
!ENDIF
!ENDIF

!IFDEF FGDB_LIB
!IF "$(FGDB_PLUGIN)" != "YES"
FGDB_LIB_LINK = $(FGDB_LIB)
!ELSE
FGDB_LIB_LINK =
!ENDIF
!ENDIF

!IFDEF MONGODB_INC
!IF "$(MONGODB_PLUGIN)" != "YES"
MONGODB_LIB_LINK = $(MONGODB_LIBS)
!ELSE
MONGODB_LIB_LINK =
!ENDIF
!ENDIF

!IFDEF XERCES_DIR
NAS_ENABLED = YES
!ENDIF

!IFDEF TD_LIBS
!IF "$(TD_PLUGIN)" != "YES"
DWG_LIB_LINK = $(TD_LIBS)
!ELSE
DWG_LIB_LINK =
!ENDIF
!ENDIF

# Under win64, symbols for function names lack the underscore prefix
# present on win32. Also the STDCALL calling convention is not used.
!IFDEF WIN64
!UNDEF STDCALL
!ELSE
SYM_PREFIX=_
!ENDIF

EXTERNAL_LIBS =	$(OGDILIB) $(XERCES_LIB) $(EXPAT_LIB) $(OCI_LIB) $(PG_LIB) \
	$(KAK_LIB_LINK) $(ECW_LIB_LINK) $(LURATECH_LIB_LINK) $(HDF4_LIB_LINK) $(FME_LIB) $(MRSID_LIB_LINK) \
	$(FITS_LIB_LINK) $(JPEG_LIB) $(NETCDF_LIB_LINK) $(PROJ4_LIB) \
	$(GEOTIFF_LIB) $(TIFF_LIB) $(PROJ_LIBRARY) $(SQLITE_LIB) \
	$(MYSQL_LIB) $(GEOS_LIB) $(HDF5_LIB_LINK) $(KEA_LIB_LINK) $(SDE_LIB) $(ARCOBJECTS_LIB) $(DWG_LIB_LINK) \
	$(IDB_LIB) $(CURL_LIB) $(DODS_LIB) $(PCIDSK_LIB) \
	$(ODBCLIB) $(JASPER_LIB) $(PNG_LIB) $(ZLIB_LIB) $(ADD_LIBS) $(OPENJPEG_LIB) \
	$(MRSID_LIDAR_LIB) $(LIBKML_LIBS) $(SOSI_LIBS) $(PDF_LIB_LINK) $(LZMA_LIBS) $(ZSTD_LIBS) \
	$(LIBICONV_LIBRARY) $(WEBP_LIBS) $(FGDB_LIB_LINK) $(FREEXL_LIBS) $(GTA_LIBS) \
	$(INGRES_LIB) $(LIBXML2_LIB) $(PCRE_LIB) $(MONGODB_LIB_LINK) $(CRYPTOPP_LIB) $(OPENSSL_LIB) ws2_32.lib \
    kernel32.lib psapi.lib