Per phase export limit

[tieskuh]

Describe the bug

I have two 10 KW inverters. The main fuse is 3x 25A so at full power I have to throttle.
If I set the export limit to "Per Phase" and the Site Limit to 5750. It throttles the entire system to 5750, not per phase as is described in this document: https://knowledge-center.solaredge.com/sites/kc/files/feed-in_limitation_application_note.pdf

Configuration:

Total production is limited, not per phase:

Without export limit:

Expected behavior

The expected behavior would be that it throttles to 5750 W per phase. Not in total.
The setting Limit Control, doesn't seem to work.

Screenshots

No response

Diagnostic File

config_entry-solaredge_modbus_multi-01JNVPR056A072GKZK6ZFEYHNC.json

Debug logs

Home Assistant Version

2025.3.3

solaredge-modbus-multi Version

3.1.1

Installation Type

HAOS

Read the Instructions

• My configuration follows https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Configuration
• I have read the Known Issues https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Known-Issues
• This issue is not about a template error (do not report template errors, read https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Template-Design-Notes)

Additional Context

No response

[tieskuh]

There is a comment that explains it in the configuration of the inverter. You can close this issue but might consider updating the wiki to prevent others from reporting the same issue.