ERYONE PLA Profile Update v b0.8.2

v b0.8.2

/!\ These profile still a work in progress /!\

With your input and feedback, it remains a work in progress by Torvast.
Feel free to contact me on my GitHub : https://github.com/Torvast


To buy this filament :  
(PLA) https://amzn.to/30oLQOL or https://s.click.aliexpress.com/e/_oonzGbl
(SILK) https://amzn.to/2PNH3UX or https://s.click.aliexpress.com/e/_oCafrHd

PET 265 (with base) BED : https://s.click.aliexpress.com/e/_oDdm7Tn

Author: Torvast

FLSUN QQ-S/PrusaSlicer/ERYONE PLA @FLSUN by Torvast.ini

@@ -1,16 +1,20 @@
-# generated by PrusaSlicer 2.4.0+win64 on 2022-03-05 at 09:34:43 UTC
-bed_temperature = 50
+# generated by PrusaSlicer 2.9.1 on 2025-03-13 at 09:31:43 UTC
+bed_temperature = 60
 bridge_fan_speed = 100
+chamber_minimal_temperature = 0
+chamber_temperature = 0
 compatible_printers = "FLSun QQS Pro"
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_FLSun.*/ and printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/
 compatible_prints = 
 compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 1
+enable_dynamic_fan_speeds = 0
 end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 100
+filament_abrasive = 0
 filament_colour = #FF0000
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
@@ -19,39 +23,61 @@ filament_cost = 30
 filament_density = 1.25
 filament_deretract_speed = 30
 filament_diameter = 1.75
+filament_infill_max_crossing_speed = 0
+filament_infill_max_speed = 0
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 10
 filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "v 0.06.1\nThese profile still a work in progress by Torvast\nFor more and updates : https://github.com/Torvast/T-CORE.FR_3D-Printing-Profiles\n\nTo buy this filament :  \n(PLA) https://amzn.to/30oLQOL\n(SILK) https://amzn.to/2PNH3UX"
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
+filament_notes = "v b0.8.2\n\n/!\\ These profile still a work in progress /!\\\n\nWith your input and feedback, it remains a work in progress by Torvast.\nFeel free to contact me on my GitHub : https://github.com/Torvast\n\n\nTo buy this filament :  \n(PLA) https://amzn.to/30oLQOL or https://s.click.aliexpress.com/e/_oonzGbl\n(SILK) https://amzn.to/2PNH3UX or https://s.click.aliexpress.com/e/_oCafrHd\n\nPET 265 (with base) BED : https://s.click.aliexpress.com/e/_oDdm7Tn\n"
+filament_purge_multiplier = 100%
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
 filament_retract_layer_change = nil
 filament_retract_length = 7
+filament_retract_length_toolchange = nil
 filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
+filament_retract_restart_extra_toolchange = nil
 filament_retract_speed = 40
+filament_seam_gap_distance = nil
 filament_settings_id = ""
+filament_shrinkage_compensation_xy = 0%
+filament_shrinkage_compensation_z = 0%
 filament_soluble = 0
 filament_spool_weight = 999
+filament_stamping_distance = 0
+filament_stamping_loading_speed = 20
 filament_toolchange_delay = 0
+filament_travel_lift_before_obstacle = nil
+filament_travel_max_lift = nil
+filament_travel_ramping_lift = nil
+filament_travel_slope = nil
 filament_type = PLA
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
 filament_vendor = Generic
 filament_wipe = nil
-first_layer_bed_temperature = 50
-first_layer_temperature = 205
+first_layer_bed_temperature = 65
+first_layer_temperature = 220
 full_fan_speed_layer = 0
+idle_temperature = nil
 inherits = Generic PLA @FLSUN
 max_fan_speed = 100
 min_fan_speed = 50
 min_print_speed = 15
+overhang_fan_speed_0 = 0
+overhang_fan_speed_1 = 0
+overhang_fan_speed_2 = 0
+overhang_fan_speed_3 = 0
 slowdown_below_layer_time = 15
 start_filament_gcode = "; Filament gcode\n;M900 K{if nozzle_diameter[0]==0.6}0.12{else}0.22{endif} ; Linear Advance 1.5\n"
-temperature = 200
+temperature = 205