S40 Thermostat can't find fan modes in automations

[stealth-71]

I recently got an S40 and I have setup the integration. I can see and set HVAC and Fan modes through the UI card, but I only see the HVAC modes in my automations. I want to turn the fan to on when I have a trigger. I am having a hard time finding this. Is it supported for an S40?

[PeteRager]

Yes, you can do that. Here's an example service call.

    - service: climate.set_fan_mode
      target:
        entity_id: climate.air_conditioner
      data:
        fan_mode: "on"

[stealth-71]

Ah ok. So you call it as a service. I was looking at the Device and only saw the heat/cooling modes. Thank you for your response and your effort on this integration!

[PeteRager]

Thanks.

And to turn the fan off set it to "auto". You can also control the CFM if you want more air or less. There's an example script here.

https://github.com/PeteRager/lennoxs30/tree/master/samples/set_fan_cfm

You'll need to have equipment parameters turned on in the integration config