history

vlink history
=============

(ados/ehf):   changes are relevant for Amiga-Hunk/EHF only
(elf):        general ELF changes
(elf32ppc):   changes are relevant for ELF32-PowerPC only
(elf32m68k):  changes are relevant for ELF32-M68k only
(elf32arm):   changes are relevant for ELF32-ARM only
(elf32i386):  changes are relevant for ELF32-386 only
(elf64x86):   changes are relevant for ELF64-x86_64 only
(a.out):      general a.out changes
(aoutmint):   changes are relevant for MiNT only
(os9):        changes are relevant for OS-9 modules
(vobj):       changes for VOBJ format
(tos):        changes for the Atari TOS format
(xfile):      changes for the Sharp X68000 XFile format


- 0.17a (22.09.22)
o Fixed segfault following a syntax error in the linker script.
o Allow '-' in the linker script for section names.
o Fixed support for masked symbols (-m option).
o No more "out of memory" when trying to read (Linux) directories.
o -baseoff option was broken in the last release. Fixed.
o Make sure symbol definitions from already linked object units have priority.
o Reworked some error messages. Print signed values and mask output according
  to target address size.
o New option -wfail makes vlink return with an error code not only for
  errors but also for warnings.
o (ados/ehf) Enabled masked symbol support.
o (ados/ehf) Sections from executables get a unique name made out of their
  type and memory flags.
o (elf) NOLOAD sections should not be part of any load-segment.
o (elf) Enabled support for R_NONE relocations.
o (vobj) Enabled support for R_NONE relocations.

- 0.17 (26.02.22)
o Fixed bug when linking different object file formats.
o Fixed malformatted output of some error codes for 32-bit hosts.
o The string "DONTMERGE_" within a section name is replaced by a
  unique id to optionally prevent merging with any other section.
o Report global symbol name conflicts from linked library objects,
  except when their definition sections belong to different
  architectures (needed for linking mixed binaries, like WarpOS 68k/PPC).
o Fixed random values from illegal arguments for various "-opt <n>" style
  options.
o Target format option (-b) is now parsed before any other option, so
  target-specific options may appear in front of it again.
o (rawbin) Fixed output of leading empty sections, which don't have
  the NOLOAD flag.
o (rawbin) Fixed file size in AMSDOS header at offset 64.
o (a.out) aoutnull must default to 32 bit addresses.
o (a.out) Make baserel (small-data) relocations compatible to GNU-binutils.
o (ados/ehf) Fixed recognition of EHF objects and libraries.
o (ados/ehf) Ignore free-floating debug hunks (SAS/C debug?).
o (ados/ehf) New option -broken-debug.
o (ados/ehf) Fastcall-ABI constructors/destructors (symbol names
  starting with '@' instead of '_') replace standard ones, when
  priority and name is otherwise identical.
o (ados/ehf) Fixed EHF symbol redefinition bug since V0.16f.
o (tos) Make sure data section size is even. No longer try to add the
  uninitialized data part to bss.

- 0.16h (28.04.21)
o Prepared the code to work with architectures which don't use 8-bit
  bytes. Currently it should work with multiples of 8 bits.
o New target file formats "o65-02" and "o65-816" can read and write
  object files and executables in the o65 format by Andre Fachat.
o New target file format "oricmc" writes a machine code file header
  for Oric computers. Supports optional auto-exec (-autox).
o New target file format "sinclairql" writes binary files for
  Sinclair QL emulators using either a QDOS header or a XTcc trailer
  and an optional reloc table.
o New option -nowarn=n to not display a specific warning message.
o Now the linker searches in all paths defined by -L first, before
  finally looking into the local directly.
o -Ttext <addr> may define the start address of absolute code even
  without a linker script.
o Some options are really target-specific now, and not available when
  a different target is selected.
o Fixed a rare bug when merging sections with the same type and linking
  without a linker script.
o Undefined symbols declared on the command line (-u) or in the linker
  script (EXTERN) allocated 4 bytes at the end of the first section.
  Fixed.
o (vobj) Section attributes 'c' and 'x' both select type=code and set
  the executable flag. Otherwise "rx" would be classified as data.
o (rawseg) Fixed relocations to linker-script symbols in unallocated
  sections.

- 0.16g (31.12.20)
o New target file format bbc to generate .inf files for BBC Micro/Master.
o Fixed symbol assignments referring to other symbols in linker scripts.
o Optional symbol assignments can be done with =?. Such an assignment will
  be silently ignored when the symbol already exists.
o New option -D to define linker symbols on the command line.
o ASCII output (S-Rec, ihex, etc.) is now done using the host systems
  line endings.
o When calculated relocation addends in raw binary formats are out of bounds,
  also print the name and section-offset of the input file.
o (os9) -os9-mem now specifies the memory to allocate in bytes instead
  of pages.
o (os9) Fixed header parity and CRC calculation.
o (os9) Fixed write error when vlink was not compiled by gcc.
o (rawbin) -q can be used with rawbin1 to append a relocation table.
o (rawseg) -q (emit relocations) is now supported for any target address size.

- 0.16f (28.09.20)
o New target file format os9-6809 to generate OS-9 modules for 6809 systems.
o OS9-specific options: -os9-mem, -os9-name, -os9-ns, -os9-rev.
o New binary target file formats applebin (Apple DOS 3.3), ataricom (Atari
  8-bit), cocoml (Tandy Color Computer) and dragonbin (Dragon DOS).
o New option -m enables special treatment of a feature-mask suffix in
  symbol names (global definitions and external references).
o New option -Crel emits constructor/destructor function references which
  are relative to their table position.
o Added cbmreu target for C64 REU memory expansion.
o New linker script functions ORIGIN() and LENGTH() for memory regions.
o Included description of linker scripts in the documentation.
o Fixed bug with AT(lma) attribute in linker script section definitions.
o (elf) Fixed reference to defined weak-symbols again.
o (ados/ehf) External small-data references may have a signed addend now,
  while small-data relocs still use an unsigned section-offset.

- 0.16e (07.07.20)
o Changing the address within an output section in a linker script didn't
  work correctly when the destination memory region (load-address) differs
  from the relocation memory region (execution-address).
o Data commands in linker scripts didn't work when there was nothing
  else in the output section.
o Fixed a segfault when a linker script moves the address counter backwards
  inside an output section.
o Fixed uninitialized pointer when loading input files via a linker-script
  INPUT command.
o New linker-script command: RESERVE(n) to reserve n bytes of memory and
  fill it with the current FILL value.
o FILL-pattern should always be written in big-endian.
o Replaced FILL command by FILL8 and FILL16.
o New option -mall to merge everything into a single output section.
o Weak symbols must only be resolved in executables.
o (rawbin) Motorola S-Records: Fixed start address in S8 and S9 trailer.
o (vobj) Fixed reference to a defined weak symbol in an object.
o (elf) Fixed reference to a defined weak symbol in an object.

- 0.16d (18.04.20)
o New option -N for renaming input sections.
o New option -vicelabels to generate a label-address mapping for the
  debugger from the VICE emulator.
o -M option for generating map files accepts an optional output file name.
o Map files prints all symbols per section sorted by value. The values
  are printed on the first column now, using the target address size for
  formatting.
o Multiple lines for the same section in a linker script are not allowed.
o Try to avoid "segment is closed" errors in linker scripts which define
  and use memory regions, and no PHDR definitions.
o Fixed output of trailing zero-bytes in all hex-formats, like S-Records,
  IHex, SHex1.
o (ados/ehf) Always generate short-reloc hunks, when requested by -Rshort.
  Relocs with offsets > 0xffff will be written in a separate hunk.
o (ados/ehf) HUNK_LIB parsing sometimes failed. Fixed.
o (rawbin) Target cbmprg no longer automatically splits the output file,
  when there are larger gaps between output sections.
o (rawbin) Trailing S-record (S7, S8, S9) contains the entry address.

- 0.16c (10.06.19)
o New target file format XFile, for Sharp X68000 computers. At the moment
  only executables may be created. No object file support.
o (ados/ehf) Handle data-bss sections correctly, when linking/stripping
  executable files.

- 0.16b (28.12.18)
o New option -mtype: merge all sections of the same type (code, data,
  bss), ignoring name and attributes.
o (ados/ehf) Fixed possible segfault when linking resident modules.
o (ados/ehf) Allow linking/stripping executables again.

- 0.16a (14.08.17)
o New linker script commands: BYTE, SHORT, LONG, QUAD, SQUAD.
o New option -k: keep original section order from the objects.
o Fixed crash with -gc-all and unreferenced symbols.
o Fixed crash with unresolved weak symbols.
o (ados/ehf) _INIT/_EXIT functions with register arguments (prefixed by
  '@' instead of '_' for SAS/C-compatibility) are also detected, and their
  pointers inserted into the proper con-/destructor tables.
o (elf) Provide __CTOR_LIST_END, __DTOR_LIST_END.

- 0.16 (16.05.17)
o Fixed a potential crash when linking with empty object files, while
  using a linker script.
o (ados/ehf): Support blink/slink linker symbols _RESLEN, _RESBASE,
  _NEWDATAL for generating resident (pure) programs.
o (ados/ehf): Fixed SAS/C-compatibility linker symbol __BSSLEN. Now it
  represents the number of long words instead of the number of bytes.
  WARNING! Make sure to check your code, if you used __BSSLEN before!
o (ados/ehf): AmigaOS LoadSeg() (up to V40) has a problem with allocating
  data-bss sections, which have an initialized size of 0. Implemented a
  workaround for this case.
o (elf) Fixed crash in dynamic linking due to section-trimming.
o (elf,aout) Malformatted library archive files are no longer fatal, but
  will be ignored.
o (rawseg) Do not write output sections marked with NOLOAD.

- 0.15d (06.02.17)
o Section-trimming, introduced with V0.15b, did not work well with ELF
  executables. Fixed that.
o New options -gc-all and -gc-empty for section garbage-collection.
o New option -Z to prevent the linker from automatically removing a
  section's trailing zero-bytes.
o New output format: jagsrv. Absolute raw binary output, similar to rawbin1,
  but with a header to make it load and execute via the Atari Jaguar
  SkunkBoard or the VirtualJaguar emulator.
o (ados/ehf): Fixed a memory leak in relocation output and optimized it.
o (elf) Allow N_FUN stabs without a relocatable label in n_value.

- 0.15c (01.11.16)
o Fixed problems with relocation addend sign-extension, introduced in
  the last version.

- 0.15b (17.09.16)
o Reworked reading and writing of relocations. Support more complex
  relocations.
o Fixed inserting little-endian relocations, which only worked before when
  the reloc-fields started and ended on byte-boundaries.
o Do not include zero-bytes at the end of a section into the ininitalized
  file size, for those file format which support that.
o (elf) Fixed illegal memory access when linking an ELF program without a
  linker script.
o (elf32jag) Fixed MOVEI-relocation.
o (vobj) For little-endian the bit position in a byte of a reloc-field is
  now counted from right to left. VOBJ files by vasm-versions older than
  V1.7f may be incompatible for complex little-endian relocations (e.g. ARM).

- 0.15a (12.03.16)
o New option -mrel instructs the linker to merge all sections with
  PC-relative references between them. This was done automatically
  in previous versions, but makes no sense for most targets.
o New option -hunkattr, which assigns memory attributes to an input section
  name. The memory attributes of all those input sections will be
  overwritten.
o (elf) Introduced the new target "elf32jag", an unofficial ELF target
  for the Atari Jaguar RISC CPU.
o (ados/ehf) Read/write extended memory attributes (0xc0000000 in hunk
  type or size). Extended attributes in object files seem unofficial,
  but supported by vasm now.
o (ados/ehf) Allow memory flags with HUNK_PPC_CODE in object files.
o (ados/ehf) Support HUNK_RELRELOC32 in executables (since OS3.0).
o (a.out) Fixed pc-relative relocations in relocatable object file output.

- 0.15 (28.12.14)
o (ados/ehf) Support for SAS/C style indexed libraries (HUNK_LIB).
o (ados/ehf) -Csasc is accepted to build a table with SAS/C constructors
  and destructors. It looks for functions named __STI_... and __STD_...
o (tos) New option -tos-textbased to write symbol offsets which are based
  on the text section (MonST-comaptible).
o (tos) text and data section size in the header must not be odd.
o (aoutmint) text and data section size in the header must not be odd.

- 0.14d (07.06.14)
o (vobj) Fixed reading common symbols from VOBJ files.
o (a.out) Fixed detection of Atari Jaguar MOVEI relocations.
o (tos) Label values from the symbol table must be an offset to the section
  they are defined in.

- 0.14c (27.12.13)
o (ados/ehf) Ignore FILE and SECTION symbols, when converting from a
  different format. They have no meaning here.

- 0.14b (31.08.13)
o Fixed potential illegal memory accesses when reading unallocated
  amigahunk/ehf or a.out BSS sections.
o Also delete empty sections with symbols, provided they are unreferenced
  and stripped.
o Fixed symbol assignments in the linker script's section definitions.
  Defining symbols before the first input section pattern didn't work.
o Make sure that pc-relative relocations are resolved when the target symbol
  is in the same output section, even when -q (keep relocs) is given.
o New option -osec, which makes some target formats output each section
  as an individual file. Currently valid for: rawbin1, rawbin2,
  amsdos, cbmprg.
  -osec=basename can be used to put "basename." in front of each output
  file name (section name).
o Allow '.' symbol in a linker script's MEMORY block, to refer to the
  start address given by -Ttext.
o (elf) Display an error when a section doesn't cleanly attach to a
  program segment.
o (a.out) Fixed reading of empty objects, without any symbols.
o (aoutmint) Make sure that TOS symbol table length is zero, when there
  are no symbols.
o (vobj) Fixed sign-extension of relocation addends and masks. This had for
  example the effect that 16-bit PC-relative overflows were not recognized.
o (rawbin) Extended the default script (.rodata, COMMON, .comment).
o (rawbin) Special default linker script for amsdos, supporting banks.

- 0.14a (08.08.12)
o New output format: amsdos, for Amstrad/Schneider CPC computers.
o New output format: cbmprg, for Commodore 8-bit computers (PET, VIC-20,
  64, etc.).
o The output formats rawbin2, amsdos and cbmprg will use the section name
  instead of the section's base address as file name appendix for
  additional files.
o When using a linker script the input sections will be grouped by type
  (code, data, bss) when being merged into a pattern-matched output
  section. This keeps uninitialized parts together and is required to
  form data-bss sections.
o The binary output formats will display a fatal error when sections are
  overlapping. This could cause crashes or huge output files before.
o Fixed syntax and type errors in dir.c when compiling for Windows
  (introduced in 0.14).
o New linker-script command: ASSERT(), to generate a fatal error when the
  tested expression is zero.
o New linker-script functions: MAX(a,b) and MIN(a,b) to return the
  higher or lower of two values.
o (ados/ehf) A section named "BSS" is no longer automatically merged with
  other bss-type sections.
o (vobj) Regard all information from an object as unsigned, except symbol
  values and reloc addends and masks.

- 0.14 (05.08.11)
o (elf) Introduced a module with common functions for ELF32 and ELF64,
  then added experimental ELF64 support. First ELF64 test target is:
  elf64x86.
o (ados/ehf) The new option -da forces the linker to allocate all PowerOpen
  address symbols (@_sybmol) which point to an already known symbol, which
  was only done before when generating an amigaehf executable.
o Improved Unix path conversion into native AmigaOS or DOS format.
o Runs on plain Atari TOS.
o Add -dc and -dp as synonyms for -d (BSD ld compatibility).

- 0.13 (01.12.10)
o Fixed some NULL-pointer accesses when parsing bad linker scripts.
o New option -export-dynamic puts all global symbols of the output file into
  the dynamic symbol table, making them visible for shared objects loaded on
  demand (e.g. by dlopen()).
o When creating a shared object, do not export unused symbols from static
  link libraries as dynamic symbols. This could even lead to a crash.
o Make sure a symbol value is always correctly sign-extended to 64 bit,
  which was a problem with ELF and a.out backends.
o (elf32ppc) Fixed writing of MorphOS ddrelocs on a little-endian host.

- 0.12g (09.06.10)
o Option -y only reports symbol references which will be part of the
  resulting output file.
o (a.out) Also handle indirect symbols with N_EXT bit set.
o (elf) Automatically add a default PT_PHDR, when a PHDRS block in a
  linker script doesn't define it although it was requested to be part
  of a PT_LOAD PHDR.
o (elf) Ignore R_NONE relocations. No longer fail on it.
o (elf) Introduced the new target "elf32amigaos" for AmigaOS4. The only
  difference to the standard "elf32ppcbe" is that even references from a
  shared object (to other shared objects) have to be resolved at link time.

- 0.12f (14.07.09)
o Do not set the executable flag of the target file before it is closed.
  This prevents exclusive locking problems with some file systems (e.g.
  with JXFS from AmigaOS4).

- 0.12e (02.07.09)
o Multiple definitions of absolute symbols are ignored, when all have the
  same value.
o Replaced #ifdef WIN32 by _WIN32.
o (elf) Fixed an error when creating executables with the default 2-segment
  layout, while one segment remains empty (e.g. only .text and .rodata).

- 0.12d (05.05.09)
o (a.out) New format aoutnull, which is the default format with undefined
  endianness and standard relocations, when an object with MID 0 is read.
o (a.out) New format aoutjaguar, which recognizes swapped 16-bit words
  and generates a special relocation for the Jaguar GPU MOVEI RISC
  instruction (indicated by a set COPY flag in the reloc-info field).
o (a.out) Detects Jaguar GPU MOVEI relocations in objects with MID 0
  and treats them accordingly to write a correct desintation file.
o When none of the input files sets a valid endianness use the endianness
  of the output file format. When the endianness is still unknown, guess
  it by using the endianness of the host system.
o New options -EB and -EL to define the endianness for reading input files
  and writing the output. Useful when neither the input files nor the
  output file defines a valid endianness.
o New option -minalign sets a minimum alignment (number of bits which have
  to be zero) for all imported sections. The specified alignment value will
  only take effect when higher than the section's current alignment.
  It defaults to 0.

- 0.12c (20.03.09)
o Common symbols which are defined in several object modules must be present
  in the output file only once! Even worse, since V0.12 different object
  modules referenced their own copy of a Common symbol.

- 0.12b (02.03.09)
o (ados/ehf) LoadSeg<=V40 doesn't allow more than 31 longwords per symbol
  in HUNK_SYMBOL and will respond with "bad loadfile hunk" otherwise.
  So we just cut everything after 124 characters.

- 0.12a (31.01.09)
o V0.12 tried to prefer symbols resolved by the same object unit as it was
  referenced from. Unfortunately its implementation was wrong: it actually
  preferred symbols which are not from the same object! Fixed.
o Error message 36 was displayed as "UNUSED" although still needed.

- 0.12 (07.12.08)
o Optimized and reworked large parts of the whole source.
o Many bug fixes with dynamic linking. Experimental support for linking
  with shared objects and creating shared objects.
o New option -interp sets the name of the dynamic linker for ELF
  executables. Defaults to "/usr/lib/ld.so.1".
o New option -soname to specify the real name of a shared object/library.
o New option -shared (same as -Bshareable) to make the linker generate a
  shared object/library (experimental!).
o New option -rpath to define a library search path for the dynamic linker.
o Reworked relocation types. Support for LOCALPC, GOT, PLT, and SECTOFF
  relocations.
o Fixed linker-symbol addresses (e.g. _SDA_BASE_), when generating an
  absolute executable.
o Linker symbols _PROCEDURE_LINKAGE_TABLE_ and _GLOBAL_OFFSET_TABLE_.
o Fixed linker script function KEEP(), which preserved more sections from
  being deleted as wanted.
o Shared library with version 0.0 (e.g. libname.so.0.0) was not found.
o Removed obsolete FASTALLOC option.
o vlink.doc converted to texinfo format, which yields a vlink.pdf.
o (elf) Fixed option -n (no page alignment) for ELF.
o (elf) Linking with shared objects is supported! Currently only
  experimental for elf32ppcbe.
o (elf) Whether the file header and PHDR are included in the first segment
  of an executable is decided by the presence of the SIZEOF_HEADERS
  variable in the active linker script. Lots of fixes for generating
  executables with and without PHDR.
o (aout) New format aoutmint. This is a TOS executable with an embedded
  a.out header at the beginning of the text section. Used in the
  Atari-MiNT environment to allow using binutils.
o (vobj) Synchronize mit vasm (weak symbols, relocations) and recognize
  weak symbols.
o (vobj) Archive objects are assigned their real file name instead of the
  archive name now.
o (tos) Define a.out linker symbols __etext, __edata, __bss_start and __end.
o (tos) New options to manipulate the 32bit flags word in the header:
  -tos-flags, -tos-fastload, -tos-fastram, -tos-fastalloc, -tos-private,
  -tos-global, -tos-super and -tos-readable.
o (tos) Support for long symbol names, up to 22 characters.

- 0.11 (17.09.08)
o When merging two sections without a linker script always the section found
  earlier in the linking process (earlier on the command line) has to be
  kept. In some cases this didn't work.
o (ados/ehf) When library symbols have the same name vlink will prefer the
  one which matches the caller's cpu-architecture (PowerPC or M68k).
  This makes linking of mixed PPC/M68k binaries for WarpOS much easier.
o (ados/ehf) Silently discard weak symbols, when writing an executable.
o (a.out) Support for GNU-style weak symbols.
o Added new output file format shex1 (oilhex).

- 0.10a (23.03.07)
o New file format: elf32armle. 32-bit ELF for the little-endian ARM
  architecture. Only a few relocations are supported at the moment.
o (ados/ehf) In the past hunk-libraries would only be recognized when
  using a ".lib" suffix. Now the name is irrelevant, as long as the
  library was specified with -l option.

- 0.10 (08.08.06)
o Empty segments are marked as unused. This fixes a bug causing 
  corrupt ELF output when only one segment is used.
o PC-relative references between different sections are allowed when
  the distance between sections in the final executable is constant.

- 0.9k (05.06.06)
o Base-relative references were only recognized when the symbol referenced
  was from a different section. This caused problems when accessing
  small-data symbols in a code section.
o Print a warning when referencing a code section in base-relative mode.
  The warning may be suppressed by the new -textbaserel option.
o Read addends for base-relative relocations always have to be unsigned,
  otherwise the linker fails with addends >32767 from 16-bit displacements.
o Guarantees to set the OS-specific 'executable' flag for the output file.
o The constructor/destructor list labels, __CTOR_LIST__ and __DTOR_LIST__,
  will get an additional leading underscore in -Cvbcc mode to allow to
  refer to the same symbol in C when using ELF or a.out/hunk objects.
  Warning: This makes the vclib of vbcc/68k before 0.8j incompatible!
o vlink may be built with MSVC 2005 Express Edition and MSVC Compiler
  Toolkit 2003. Modifications done my Mikael Kalms.
o Option -R for short-relocs was replaced by a more powerful -R<format>
  option, where <format> defines the format of the relocation tables
  which may be 'std' (standard), 'add' (including addends) or
  'short' (short 16-bit offsets).
o Option -f<flavour> adds "flavours" to the library search paths, as
  known from GNU-ld.
o (vobj) vasm's VOBJ output was synchronized with vlink, so we support
  all the 15 basic reloc types now (abs, pc, plt, got, sd, secoff, etc.).
o (elf32ppc) Target elf32amiga was split into elf32powerup and elf32morphos.
  The latter will make sure that small data sections get their correct
  names (.sdata/.sbss) and always writes them in two separate sections,
  as MorphOS' ELF-loader guarantees that those sections are loaded
  concatenated into memory.
o (elf32ppc) New linker symbol __text_size for MorphOS/gcc.
o (elf32ppc) .ctors and .dtors will only renamed to .ctor_/.dtor_ when
  target is elf32powerup and the constructor-style "vbccelf" was selected.
o (elf32ppc) Automatically creates __r13_init linker symbol when
  _LinkerDB is referenced (elf32morphos).
o (elf) .note sections are recognized and correctly written.
o (ados/ehf) EHF address references starting with "@_", are also allowed
  on linker generated symbols (like ___CTOR_LIST__).
o (ados/ehf) Besides _LinkerDB, also a reference to PhxAss' _DATA_BAS_ and
  Dice-C's __DATA_BAS creates _SDA_BASE_.
o (tos) Take possible alignment gaps between text and data as well as
  data and bss into account while writing the output file.

- 0.9j (04.08.05)
o Major bug fix: section list was corrupted while assigning the object
  sections to the linker-script patterns. The consequence was that in
  rare cases a section was not recognized!
o When a relocatable object file is generated, sections are only
  linked by name. No other rules are applied!
o New option -Ttext can be used to set the start address of the first
  section, which defaults to 0 and is usually set by the linker script.
o PROVIDE() works again. It was broken since 0.9g.
o A destination section defined by a linker script had to include its
  own name in the list of source section patterns. This restriction
  was fixed!
o When common symbols are allocated in a section, its name is defined
  by the destination object file format now (.bss for ELF and a.out).
  When the process is controlled by a linker script the section is
  still called "COMMON".
o When a new object unit is pulled in from a library due to a symbol
  reference other global symbols in it, which would cause conflicts,
  are renamed and will effectively be replaced by the non-library symbols.
o The -u option or the linker-script command EXTERN() will create
  references to undefined symbols in a new dummy object now (called
  "INTERNAL"). Before, a section of the first object found was used.
o Empty .a archives are no longer rejected.
o (vobj) Relocation with different symbols at the same offset are allowed
  and will no longer be seen as a single relocation.
o (elf32ppc) Supports R_PPC_SECTOFF, R_PPC_SECTOFF_LO, R_PPC_SECTOFF_HI
  and R_PPC_SECTOFF_HA relocations.
o (elf32ppc) Supports MorphOS-specific 32-bit base relative
  R_PPC_MORPHOS_DREL_LO/HI/HA relocations (symbol __r13_init relative).
  The linker automatically generates the symbols __r13_init (located at
  .sdata+0x8000), __sdata_size (sizeof .sdata section) and __sbss_size
  (size of .sbss section) on demand. When the linker-symbol
  __datadata_relocs is referenced it will point to a newly created
  section called "ddrelocs" containing relocation offsets for .sdata to
  .sdata references and a number of records entry in the first word.
  This makes it possible to clone the .sdata/.sbss section by library
  code.
o (elf32ppc) Supports AmigaOS/PPC-specific 32-bit base relative
  R_PPC_AMIGAOS_BREL_LO/HI/HA relocations (.data section relative).
  Unlike MorphOS copying and relocating the data segment is done by
  AmigaOS (elf.library).
o (elf32ppc) Small data base offset changed from 0x7ff0 to 0x8000, to
  guarantee the same offset for SDAREL (16-bit small data) and DREL
  (32-bit base relative) and make __saveds work for both cases.

- 0.9i (13.03.05)
o Experimental stabs debugging support for a.out and ELF.
o Supports linker script commands: SEARCH_DIR, INPUT and GROUP (implemented
  as INPUT, for compatibility only).
o Encountering a PHDRS, SECTIONS or MEMORY directive in a linker script
  will enable script-linking mode, otherwise default linking rules are used.
o (elf) Fixed bug in when calculating sections gap, when every section has
  base-address 0.
o (elf) Prints an internal error when sections are overlapping (and base
  address not 0).
o Made error 19 (global symbol redefinition) a hard error. It was a
  warning before, which I think is not enough.

- 0.9h (02.01.05)
o Respect ALLOC and NOLOAD flags in binary file generation.
o Linker scripts: NOLOAD was not reset for the following sections.
o New option -fixunnamed assigns a default name according to the
  section's type (.text, .data or .bss).
o Option -u is supported. It allows to mark symbols as undefined, which
  might trigger linking of additional modules from standard libraries.
o Linker script command EXTERN, equivalent to the -u option. But you may
  specify several symbols with one EXTERN command.

- 0.9g (05.12.04)
o (elf) Start address of a non-default PHDR was wrong, so it would never
  receive any sections (only occurred when using PHDR directive).
o (elf32ppc) Changed default page alignment from 0x1000 to 0x10000.
o (ados/ehf) Sign-extend hunk symbol-values. Otherwise negative absolute
  symbols will not pass the linker's range-check.
o Fixed crash when there was not a single section defined in a linker
  script, but absolute symbols present.

- 0.9f (20.11.04)
o As soon as a small-data relocation is found, the symbol _SDA_BASE_
  has to be marked as 'referenced'. Otherwise a 'provided' _SDA_BASE_
  will disappear although needed.
o Fixed R_SD21 relocations, which didn't really work.
o (tos) Improved sorting of relocations using quick-sort algorithm.
o (elf) The order of sections in a segment is based on LMA instead of VMA.
o Fixed WIN32 pattern matching.
o (vobj) Prevent crashes caused by illegal symbol-indexes, when
  generating error(115).
o Default library search path for AmigaOS/68k is now "vlibos3:", as
  used in the latest vbcc 0.8g release.
o When linking an executable without linker script it could happen in
  rare cases that small-data sections were not merged. This was solved
  by checking for dependencies between the new created output sections,
  after all input sections from the global list have been assigned to one.
o The map-file includes a nice section-mapping output now.
o -sd option didn't work! Was treated as -sc!
o Fixed small code (-sc) mode.
o (ados/ehf) Some unofficial, currently pasm-only, reference types
  were implemented, to be able to support base-relative references to
  common symbols in hunk format.

- 0.9e (11.06.04)
o Base relative relocations will now be calculated by using the base
  symbol's value (e.g. _SDA_BASE_ for R_SD-type relocations) instead
  of just calculating a section offset. This requires that those symbols
  are defined, of course!
o (elf32ppc) Supports R_PPC_EMB_SDA2REL and R_PPC_EMB_SDA21 relocations.
o (elf32ppc) Automatically creates _SDA_BASE_ linker symbol when
  _LinkerDB is referenced.
o (ados/ehf) Automatically creates _SDA_BASE_ linker symbol when
  _LinkerDB is referenced.
o New options to add or delete preceding underscores from symbol names
  for a group of input files (-set/clr-adduscore, -set/clr-deluscore).
o Win32-compatible directory and pattern-matching routines.
o (elf) Ignores (removes) debugging sections (.stab*, .line*, .debug*)
  when option -S or -s is given.

- 0.9d (23.05.04)
o New file format: IHEX (Intel-Hex).

- 0.9c (08.05.04)
o New file format: elf32i386.
o (vobj) Relocations at the same location have to be concatenated to
  support more complex relocation types like R_PPC_ADDR16_HA.
o (elf32m68k) Included missing GOT and PLT relocations (although not
  really supported by vlink at the moment).

- 0.9b (24.04.04)
o Rewrote relocation code, which allows to represent any relocation type
  of any architecture internally. This made lots of code easier or
  obsolete.
o New file format: VOBJ. First introduced in V0.8i, but really working
  now for the first time. VOBJ is a read-only format and intended to
  support any architecture. Currently generated by the vasm-assembler only.
o Redefinition of symbols in object units included from a library are
  detected now.
o New flag defines that a target must not reset the base address to 0
  for any new section when producing a relocatable object. This is
  useful for the Atari TOS and all a.out formats.
o More precise error messages in case of relocation overflows ("distance
  too large" errors, etc.).
o (elf32ppc) Page size is 4096 bytes, not 8192!
o (ados/ehf) R_PPC_REL14 relocations can be correctly translated into
  a 16-bit relative EHF reloation.

- 0.9a (26.03.04)
o (elf) Relocatable objects with no-alloc sections no longer worked.
  Those sections must always appear at last in the output file now.

- 0.9 (29.02.04)
o (elf) ELF executables (ET_EXEC) can be written, using linker scripts.
  Only a small note, but THIS WAS THE BIG ONE!
o (ados/ehf) Don't write EHF-specific hunks and relocs in "amigahunk" mode.
o (a.out) Make sure that symbol-values are relative to their section base,
  as a.out needs to assign its own strange values in relocatable object
  file mode.
o New file format: ataritos (Atari-ST/TT TOS format). Executables only.
o Lots of modifications and simplifications in all targets.
o Linker script support was rewritten from scratch and is quite
  compatible to the GNU linker script format now, although there are
  only a few functions and commands implemented at the moment. This
  can easily be extended in future.
o Real expression evaluation for linker scripts.
o Gaps through sections alignment are filled with a linker-script
  changeable 16-bit value.
o Enhanced method to search for dynamic libraries (shared objects):
  1. look for perfect match (e.g. libc.so)
  2. look for highest version, including subversion when required
o Empty sections without symbols and relocations will be deleted.
o Small-code, small-data and relative references are also a factor for
  merging sections when creating a relocatable object file as output,
  and not for executables only.
o Extended most data structures for 64-bit support.
o Fixed all functions to work with a section-VA different from 0, which
  is required for absolute executables and linker scripts.
o New option -e sets the entry point for an executable.
o New option -n disables page alignment in final executable.
o New option -q keeps relocations in the final executable.
o Options -dn,-dy,-dp,-dc are obsolete. There is only -d for allocation
  of common symbols (-dc will be recognized too).
o New constructor/destructor handling, controlled by linker-script commands
  (CONSTRUCTORS, VBCC_CONSTRUCTORS, etc.) or command line option -C.
  The linker will label constructor lists with __CTOR_LIST__ and destructor
  lists with __DTOR_LIST__ (available for all targets).
o Common symbols will always be defined relative to an artificial section
  called "COMMON". Common symbols which are referenced base-relative are
  placed into ".scommon". These sections may be used in linker scripts.
o No longer deallocate symbols when writing output, as they might be
  needed later.
o Map file: Declare values printed after "Allocating common" as hex.
o Map file: Printing value of absolute symbols fixed.
o When printing files, sections and their new addresses into a map file:
  use original section names instead of the new ones. This makes the output
  a bit harder to read for relocatable executables, so I might think
  about it again...

- 0.8m (30.09.03)
o New file format: elf32m68k.

- 0.8l (22.08.03)
o Target amigaos was renamed to amigahunk.
o Target elf32powerup was renamed to elf32amiga.
o Warnings about modified section-attributes and alignment were improved
  by printing the involved object names.

- 0.8k (23.02.03)
o (ados/ehf) -P option should be supported now.
o (ados/ehf) Stripping of local symbols from the final executable supported:
  -x strips all local symbols, -X only those starting with 'l', 'L' or '.'.
o (ados/ehf) The line debug hunks can also be stripped separately from an
  executable by specifying -S, retaining the symbol names in HUNK_SYMBOL
  (which would not be stripped before -s).
o (a.out) Fixed -X option. Stripping of all local symbols which start with
  the letter 'l' or 'L' should work now.

- 0.8j (28.09.02)
o New option -P can define one or multiple symbols which are protected
  against stripping (by -s or -x options). Currently not supported by
  target "amigaos".

- 0.8i (06.06.02)
o New file format VOBJ was included.
o Some little endian fixes and improved support for MSDOS-based
  operating systems ... :-/

- 0.8h (12.01.02)
o Fixed a bug when writing 26-bit values into a section! It was intro-
  duced by code cleanup in V0.8f and affected the elf32ppc targets.

- 0.8g (01.01.02)
o (a.out): Support for the first little endian targets:
  "aoutbsdi386" (NetBSD) and "aoutpc386".

- 0.8f (31.12.01)
o Cleanup of source text for ELF and a.out targets. Architecture specific
  code is separated in different files. t_aout.c and t_elf32.c only
  include common code now.
o Fixed reading/writing of 16/32 bit words in little- and big-endian
  format. This should finally work on any(!) CPU now.
o When using linker scripts: Memory blocks can depend on current
  address of previous blocks and align them to get their initial
  org-address (". = ALIGN(x);" in scripts).
o Linker script symbols support alignment ("_sym = ALIGN(4)").
o (a.out): Can genetate relocatable object files (OMAGIC) and static paged
  executables (ZMAGIC). Still no dynamically linked executables.
o (elf): -s will strip all symbols now, even the local ones (which didn't
  work before).
o (ados/ehf): When writing relocs and external references the correct
  addend will be written into the section to prevent differences from
  other object files formats (like a.out).

- 0.8e (05.12.01)
o (ados/ehf): Line debug information is no longer ignored.

- 0.8d (01.12.01)
o Non-allocated (discardable) sections (like .comment in ELF for example)
  will no longer be recognized as small data sections.

- 0.8c (26.06.01)
o Sign extension problems with 16-bit addends fixed.

- 0.8b (21.06.01)
o Relative references between different sections of two objects were
  only detected from the first to the second object, but not the other
  way around.

- 0.8a (11.04.01)
o -Bforcearchive is supported. This option forces all object units of
  a library archive to be loaded into the output file.

- 0.8 (16.02.01)
o a.out support. New object file formats: aoutbsd68k, aoutbsd68k4k,
  aoutsun010, aoutsun020 (the last two are used by gcc under AmigaOS).
  Currently we can only read a.out objects and libraries, not write!
  Some a.out symbol types are still missing, like SETA/T/D/V.
o Motorola S-Record support. New object file formats: srec19, srec28
  and srec37 (16-, 24-, 32-bit addresses). Like "rawbinX", "srecXX"
  can only be written. This is no read-format. Use linker scripts to
  define the section layout of rawbin and srec.
o Support for indirect symbols, as required by the a.out format.
o Fixed BSD's long-names format in archives (missing 16-bit alignment).
o The special name "ARFILENAMES/" in GNU archives is recognized.
o Common symbols are really supported now.
o -dc option (force allocation of common symbols) works.
o vlink will find libraries in current directory now. Before, this only
  worked for shared objects. The search sequence is: current directory,
  user-defined (-L) directories, default directory (compiled in, -V).
o (ados/ehf): EXT_RELCOMMON is supported (common symbols).
  Common symbol definitions have to be ignored. There are only common
  symbol references in hunk format, which must be detected by checking
  whether the referenced symbol is a common one.
o (ados/ehf): Fixed REL16 support in created objects.
o (ados/ehf): Added support for REL8,REL32,ADDR8,ADDR16,BASEREL8,BASEREL32.
o (ados/ehf): Prints a warning on unreferenced common symbols in an object,
  because they will disappear in hunk format.
o (ados/ehf): Included linker symbols from GNU-gcc for AmigaOS/68k
  (ixemul.library): ___machtype, ___text_size, ___data_size, ___bss_size.
  This makes it theoretically possible to replace GNU-ld for linking a.out
  objects into an Amiga hunk-format executable.
o (ados/ehf): Indirect symbols are ignored, when an executable is generated.
o (ados/ehf): Never writes relocation hunks with more than 65536 entries!
   Due to a bug in AmigaOS' dos.library we have to use a workaround.

- 0.7c (02.12.00)
o (ados/ehf) Short relocations (option -R) must not be written as HUNK_DREL32
  into an object file - it is allowed for executables only! For objects
  (e.g. -r) we are using the correct HUNK_RELOC32SHORT now. Otherwise you
  got the message "file format corrupted" when trying to link such an
  object.

- 0.7b (13.11.00)
o (elf32ppc) ELF32-PowerUp objects (-r option) didn't contain any symbols!
  So it was a bit difficult to link them with other objects after-
  wards. ;)

- 0.7a (07.03.00)
o (ados/ehf) Linker option -R (short relocations) is now supported by target
  amigaos. With this option given, it will try to create HUNK_DREL32 hunks
  (which is the OS2.0-compatible equivalent to HUNK_RELOC32SHORT) whenever
  possible - which means no more than 65535 relocations and no relocation
  offset > 0xffff.
o Unlimited line length in object list files (-F option).

- 0.7  (13.02.00)
o (elf) Common symbol references are recognized. There are still problems
  with those references, when using -r option.

- 0.6e (09.10.99)
o First mini support for linker scripts. They can be specified by using
  the new option -T. Linker scripts will allow to create executables
  for ELF (and other Unix targets) in future.
o New targets "rawbin1" and "rawbin2", which generate an absolute
  raw binary file. The base address is generally specified by using
  a linker script (-T option). The difference between the two is, that
  rawbin2 creates a separate file for every section.

- 0.6d (13.02.99)
o (elf) The PowerUp ELF loader has its own constructor/destructor
  functionality for .ctors and .dtors sections, so we have to
  rename them to .ctor_/.dtor_ (elf32powerup executable only). The
  contents can still be referenced by .ctors/.dtors, though.

- 0.6c (05.02.99)
o (elf) Elf32 supports vbcc's _INIT/_EXIT function, where constructor/
  destructor function pointers will be placed into the .ctors and .dtors
  sections. .ctors/.dtors are using the standard format, but compiler-
  generated entries will not work - the linker has to create these sections.
  If .ctors or .dtors is referenced, but no such section exists, the
  linker will create an artificial absolute symbol with the value 0
  instead.
o All targets use the standard format for constructor/destructor
  sections, which means: first longword describes the number of pointers
  or is -1 (vlink uses the latter one), when the init code has to deter-
  mine the number itself. The last longword will always be a NULL pointer.

- 0.6b (16.01.99)
o Changed copyright.
o Compiles now under Irix 5.3.

- 0.6a (19.12.98)
o vlink should be prepared to support little-endian objects now. The
  endianness of the whole linking procedure is determined when loading
  the first object file. Consequently the following ones must use the same.
o Fixed some problems with constructor/destructor-type linker symbols in
  small data mode. Although they were addressed base-relative, their
  sections could not be coalesced with the small data section and their
  offsets were never updated.

- 0.6  (24.10.98)
o The section offset for base-relative relocations was made target-
  dependant. Consequently, -baseoff modifies the default setting for
  the current output file format.
  The following default offsets were defined:
  amigaos/amigaehf: 0x7ffe, elf32ppcbe/elf32powerup: 0x7ff0.
o New target elf32powerup, which supports the PPC coprocessor boards
  from Phase5. The format of elf32powerup executables is the same as
  the format of elf32ppcbe relocatable objects, but no unknown symbols
  are allowed and base relative relocations will be resolved.
o (elf): Linking with shared objects is supported, but they still cannot
  be created by vlink.
o (elf): .sdata/.sbss and .sdata2/.sbss2 (EABI) will always be combined,
  also in -multibase mode.
o (elf32ppc): _LinkerDB is no longer known to elf32ppcbe. It's an
  elf32powerup-only symbol now.
o (elf32ppc): Linker symbols _SDA_BASE_ and _SDA2_BASE (EABI).

- 0.5f (08.10.98)
o (ados/ehf): The automatic constructor/destructor functions have to
  begin with __INIT or __EXIT to avoid conflicts with ANSI-C identifiers.

- 0.5e (05.10.98)
o A target may create prioritized pointers or constants in a new
  section. This feature is useful for buidling constructor/destructor
  function pointer tables. Currently used by ados/ehf only.
o (ados/ehf): Global symbols beginning with _INIT or _EXIT will create an
  entry into the constructor/destructor function pointer table.
  These tables can be addressed by using the symbols __ctors and __dtors
  (e.g. in the startup/cleanup code of a program).
  The priority of these functions may be defined by specifying a number
  behind the INIT/EXIT string. Example: _INIT_9_OpenLibs.
  Otherwise their priority defaults to 0 and they will be positioned
  in order of occurence.

- 0.5d (22.08.98)
o Faster memory allocation algorithm, using 256k chunks. Can be
  activated by defining FASTALLOC.
o Directories are only scanned for shared objects, because of a possible
  version extension. This is a great improvement under AmigaOS, because
  the file system is not fast enough.
o When using the -dn option together with the previous two enhancements,
  vlink is nearly 10(!) times faster than before, under AmigaOS.

- 0.5c (08.07.98)
o (ados/ehf): If the target is EHF and an undefined reference to a
  symbol beginning with "@_" was detected, it will be automagically
  generated by the linker, as long as a symbol without "@_" already
  exists. The linker will create an artificial object unit with the
  name of the referenced symbol (without "@_"), including a data section
  called ".tocd", which reserves four bytes for the symbol pointer.
  This nice feature allows the generation of @__name pointer symbols
  in the TOC section on demand, which saves a lot of space.

- 0.5b (05.07.98)
o (elf32ppc): Implemented linker symbol _LinkerDB.

- 0.5a (28.06.98)
o Error 19 (symbol xxx (yyy) is already defined in...) was turned
  into a warning.
o Option -w (suppress warnings) was missing in help text.

- 0.5  (27.06.98)
o Target specific linker symbol support. This feature is currently
  only used by the AmigaDOS file format.
o (ados/ehf): Implemented linker symbols:
  _DATA_BAS_, _DATA_LEN_, _BSS_LEN_, _LinkerDB, __BSSBAS, __BSSLEN,
  __ctors, __dtors, __DATA_BAS, __DATA_LEN, __BSS_LEN, __RESIDENT.
o -v shows the default target.

- 0.4  (05.06.98)
o New linking rules. A lot more factors are now involved in the decision
  whether two sections have to be coalesced or not:
  - target-specific linking rules are checked first
  - small-code option forces merging of all code sections
  - small-data option forces merging of all data and bss sections
  - relative references between two sections
  - all sections which have base-relative references from other sections
    must be merged (if not denied by -multibase)
  - default linking rules: sections must have the same name and type
o (ados/ehf): target specific linking rules:
  - unnamed sections are never merged, unless the small-code or small-data
    option is given
  - sections named _NOMERGE are absolutely never merged
  - data and bss sections named __MERGED will be merged, warn about
    code sections with this name (but merge them anyway)
o All targets which support it can now take advantage of code-bss and
  data-bss sections. In this case only the initalized section contents
  is stored in the file, although the section header contains the total
  size. The operating system is responsible for clearing the unini-
  tialized part after loading.
o Option -sc forces merging of all code sections in an executable.
o Option -sd forces merging of all data and bss sections in an executable.
o Option -multibase prevents auto-merging of sections, which are accessed
  base-relative. This means the program uses more than one base register
  for accessing small data.

- 0.3b (02.05.98)
o Some experimental code for target elf64alpha, but nothing usable now.
o There were still infinite loops, if an object comes without any section.
o (ados/ehf) A dummy code section will be created, if an output file
  has no section at all.

- 0.3a (18.04.98)
o Updated and changed some help texts.

- 0.3  (17.04.98)
o First version, which reliably links ELF32-PowerPC-BigEndian relocatable
  object files and library archives. The only ELF output format is
  currently a relocatable object, which means only linking with -r works.
o Support for SystemV-style and BSD-style ".a"-archives.
o (elf32ppc) Resolving ADDR16_HA/HI/LO references to a relocatable
  symbol didn't work (2 bytes of the next instructions were overwritten).
o Fixed the print routine for function names, in which an error occurred.
  It didn't work, if symbols had a known size. Additionally, it can
  differentiate between 'no type', 'function' and 'object' now.
o Option -R directs vlink to generate short relocs, if the target format
  allows this. It is for example supported by ELF and AmigaDos.
  Restriction: -R is currently ignored for ados/ehf and I'm not sure if
  the implementation is correct for elf32ppc, because "objdump --reloc"
  crashes on encountering ".rel" sections. Don't use this option for now!
o Commented out some options in the help text, which are still not supported.
o Implemented full support for little endian file formats, although
  vlink currently doesn't know about one (maybe ELF64-Alpha-LittleEndian
  will be the first? :).
o (ados/ehf) Absolute local symbols for object files and absolute local
  and global symbols for executable files are ignored.
o (elf) Unlike ados/ehf, ELF allows multiple definitions of local symbols.

- 0.2a (20.03.98)
o Option -F reads a list of input files from the specified file name.
  File names are separated by blanks, tabs, newlines, etc., so a file
  name which contains blanks has to be in quotes.

- 0.2  (07.03.98)
o First version, which successfully linked EHF objects for WarpOS
  into working executables!
o Library units are no longer forced being the last object units
  in an output file. They will be immediately inserted, if a 
  unit's symbol is referenced. This makes it possible to ensure
  that the last object in the linker command line will also be the
  last object unit in the resulting output file.
o Option -v displays the standard library path.
o Severe problems with base relative references, if the output file
  is a relocatable object again:
  Normal references were resolved, but they must remain relocatable.
  External references were even completely corrupted, and overwrote
  the following instruction.
o (ados/ehf) Number of hunks determined in HUNK_HEADER was wrong,
  if resident library name is missing (which is always the case).
o (ados/ehf) HUNK_DREL32 will be treated as HUNK_RELOC32SHORT, if the
  input file is executable.
o (ados/ehf) Unnamed sections of an executable will always get
  different names, to avoid that they are linked together. This would
  cause some strange effects, like wrong base relative offsets, mixed
  PowerPC and M68k code, etc..

- 0.1c (02.03.98)
o Internal error (thousands of sections detected), because of an
  uninititalized variable.

- 0.1b (28.02.98)
o Base relative relocations, with -baseoff=0x8000 (default)
  didn't work.

- 0.1a (28.02.98)
o Usage of AllocMem() in dir.c is not recommendable, when considering
  a PowerPC-port. Changed to malloc().
o Some minor fixes - missing proto types, etc.
o Modified help text in version.c

- 0.1  (27.02.98)
o First version that seems to link AmigaOS ADOS and EHF
  objects and libraries. Many common features, like linking
  sections together which have relative references, are
  still missing. Also, PowerPC-ELF32 support is about to come.

- 0.0  (04.08.97)
o Project started on a beautiful summer-day at the North Sea
  beach of Cuxhaven. :)